IAXG01M.pdf 데이터시트 (총 29 페이지) - 파일 다운로드 IAXG01M 데이타시트 다운로드

No Preview Available !

www.DataSheet4U.com
Engineering Specification
Engineering Specification
Type 12.1 XGA Color TFT/LCD Module
Model Name:IAXG01M
Document Control Number : OEM I-901M-03
Note:Specification is subject to change without notice. Consequently it is better to contact to
International Display Technology before proceeding with the design
of your product incorporating this module.
Product Development
International Display Technology
(C) Copyright International Display Technology 2001, 2002 All Rights reserved.
May 28,2002
OEM I-901M-03
DataSheet4 U .com
1/29

No Preview Available !

www.DataSheet4U.com
Engineering Specification
i Contents
i Contents
ii Record of Revision
1.0 Handling Precautions
2.0 General Description
2.1 Characteristics
2.2 Functional Block Diagram
3.0 Absolute Maximum Ratings
4.0 Optical Characteristics
5.0 Signal Interface
5.1 Connectors
5.2 Interface Signal Connector
5.3 Interface Signal Description
5.4 Interface Signal Electrical Characteristics
5.4.1 Signal Electrical Characteristics for LVDS Receiver
5.4.2 LVDS Receiver Internal Circuit
5.4.3 Recommended Guidelines for Motherboard PCB Design and Cable Selection
5.5 Signal for Lamp connector
6.0 Pixel format image
7.0 Parameter guide line for CFL Inverter
8.0 Interface Timings
8.1 Timing Characteristics
8.2 Timing Definition
9.0 Power Consumption
10.0 Power ON/OFF Sequence
11.0 Mechanical Characteristics
12.0 National Test Lab Requirement
(C) Copyright International Display Technology 2001, 2002 All Rights reserved.
May 28,2002
OEM I-901M-03
DataSheet4 U .com
2/29

No Preview Available !

www.DataSheet4U.com
Engineering Specification
ii Record of Revision
Date
December 21,2001
Document
Revision
OEM I-901M-01
Page
All
January 16,2002
OEM I-901M-02
21
May 28,2002
22
OEM I-901M-03
6
23
27,28
Summary
First Edition for customer.
Based on Internal Spec. EC H30861 as of December
11,2001.
Based on Internal Spec. EC H30861.
To update the following items.
Min. value of CFL Current
Max. value of CFL Frequency
Min. value of CFL Ignition voltage
Note
To update Luminance versus Lamp Power.
To update Weight.
To update Min. value of Frame Rate.
To update Reference Drawings.
(C) Copyright International Display Technology 2001, 2002 All Rights reserved.
May 28,2002
OEM I-901M-03
DataSheet4 U .com
3/29

No Preview Available !

www.DataSheet4U.com
Engineering Specification
1.0 Handling Precautions
O If any signals or power lines deviate from the power on/off sequence, it may cause shorten the life of
the LCD module.
O The LCD panel and the CFL are made of glass and may break or crack if dropped on a hard surface,
so please handle them with care.
O CMOS-ICs are included in the LCD panel. They should be handled with care, to prevent electrostatic
discharge.
O Do not press the reflector sheet at the back of the LCD module to any directions.
O Do not stick the adhesive tape on the reflector sheet at the back of the LCD module.
O Please handle care when mount in the system cover. Mechanical damage for lamp reflector, for lamp
cable and for lamp connector may cause safety problems.
O Small amount of materials having no flammability grade is used in the LCD module. The LCD module
should be supplied by power complied with requirements of Limited Power Source (2.5, IEC60950 or
UL60950), or be applied exemption conditions of flammability requirements (4.7.3.4, IEC60950 or
UL60950) in an end product.
O The LCD module is designed so that the CFL in it is supplied by Limited Current Circuit (2.4,
IEC60950 or UL60950).
O The fluorescent lamp in the liquid crystal display(LCD) contains mercury. Do not put it in trash that is
disposed of in landfills. Dispose of it as required by local ordinances or regulations.
O Never apply detergent or other liquid directly to the screen.
O Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
O When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth; do not use solvents
or abrasives.
O Do not touch the front screen surface in your system, even bezel.
O Gently wipe the covers and the screen with a soft cloth.
O The information contained herein is presented only as a guide for the applications of our
products. No responsibility is assumed by International Display Technology for any
infringements of patents or other right of the third partied which may result from its use. No
license is granted by implication or otherwise under any patent or patent rights of International
Display Technology or others.
O The information contained herein may be changed without prior notice. It is therefore
advisable to contact International Display Technology before proceeding with the design of
equipment incorporationg this product.
(C) Copyright International Display Technology 2001, 2002 All Rights reserved.
May 28,2002
OEM I-901M-03
DataSheet4 U .com
4/29

No Preview Available !

www.DataSheet4U.com
Engineering Specification
2.0 General Description
This specification applies to the Type 12.1 Color TFT/LCD Module 'IAXG01M'.
This module is designed for a display unit of notebook style personal computer.
The screen format and electrical interface are intended to support the XGA(1024(H) x 768(V)) screen.
Support color is native 262K colors(RGB 6-bit data driver).
All input signals are LVDS(Low Voltage Differential Signaling) interface compatible.
This module does not contain an inverter card for backlight.
(C) Copyright International Display Technology 2001, 2002 All Rights reserved.
May 28,2002
OEM I-901M-03
DataSheet4 U .com
5/29