K1300.pdf 데이터시트 (총 2 페이지) - 파일 다운로드 K1300 데이타시트 다운로드

No Preview Available !

www.DataSheet4U.com
! TTL/CMOS Compatible
! Tri-State Feature for Auto Test Systems
! Fast Rise and Fall Times
! 70 to 120 MHz Frequency Range
! Tight Symmetry (45/55%) Available
! ±100ppm Stability Standard
±50ppm Stability Available - K1350
K1300 Series
5V Crystal Clock Oscillators
20,8Km113m0000CM.T0a0I x0D.AMTHEZCODE
13,2 mm Max.
6,22 mm Max.
MODEL
Frequency Range (MHz)
Frequency Stability (ppm)
Overall (Typical)
0°C to 70°C
Temperature Range (°C)
Operating
Storage
Supply Voltage (V)
Output TTL
Input Current (mA)
Symmetry (%)
TR and TF (ns)
Fanout
Output CMOS
Input Current (mA)
Symmetry (%)
TR and TF (ns)
Start up Time (ms)
TTL
CMOS
PIN 1
ELECTRICAL SPECIFICATIONS
K1300
70 to 120
K1350
Inclusive of calibration, temperature, voltage, load, shock,vibration, aging
±100
±50
0°C to +70°C
-55°C to +125°C
+5.0 ±5%
50 -80 max
40/60 @ 1.4V
5 (0.5V to 2.5V)
10
100 max
40/60 @ 0.5VCC
5 (20% -80 % VCC)
<10
<45
PART NUMBERING GUIDE
K13XXXX - Specify Frequency
“Blank” = TTL Output
“C” = CMOS Output
“Blank” = 40/60% Symmetry
“S” = 45/55% Symmetry (Available to 100MHz.
“00” = ±100ppm Stability
“50” = ±50ppm
2553 N. Edgington Street, Franklin Park, IL 60131 " Phone: 847.451.1000 " Fax: 847.451.7585
800-888-1499 or www.champtech.com
1

No Preview Available !

K1300 Series
5V Crystal Clock Oscillators
PIN FUNCTION
1 Tri-State*
2 Ground
3 Output
4 + VCC
* Input tied internally to +5V. External input if any, should not
be less than +3V and not greater than +3.8V for TTL version.
For CMOS models, enable with either an open circuit or +5V.
SHIPPING TUBE CROSS SECTION
OUTPUT WAVEFORM
TEST CIRCUIT DIAGRAM
MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS
TEST METHODS
Temperature Cycle
Mechanical Shock
Vibration
Humidity Steady State
Thermal Shock
Electrostatic Discharge
Solderability
Hermeticity
Resistance to Soldering
Lead Integrity
Marking Permanence
Life Test
REFERENCE PROCEDURES
DESCRIPTION
MIL-STD-833, Mtd 1010, Cond. B
-55°C to +125°C; Air-to-Air; 100 cycles; 10
min. dwell
MIL-STD-883, Mtd 2002, Cond. B
1500 g’s
MIL-STD 883, Mtd 2007, Cond. B
20-2000 Hz; 0.06 inch; 15g’s; 3 planes
MIL-STD-202, Mtd 103
40°C; 90%-95% R.H.; 56 days
MIL-STD-883, Mtd 1011.7 Cond. B
100°C to 0°C; Water-to-Water; 15 cycles
MIL-STD-883, Mtd 3015 Class II
2 KV to 4 KV Threshold
MIL-STD-883, Mtd 2022.2
MIL-STD-883, Mtd 1014.8, Cond. A1
Solder dip; Meniscograph Criteria
Mass spectro. 2 x 10-8 atmos. CC/sec He
MIL-STD-202, Mtd 210D, Cond. J
235°C; 30 seconds
MIL-STD-883, Mtd 2004.5, Cond. A, B1 Lead tension & bend stress
MIL-STD-883, Mtd 2015.8
MIL-STD-883, Mtd 1005.6
Resistance to solvents
125°C, powered, 1000 hours minimum
2553 N. Edgington Street, Franklin Park, IL 60131 " Phone: 847.451.1000 " Fax: 847.451.7585
800-888-1499 or www.champtech.com
2