209CNQ... Series
Bulletin PD-20722 rev. B 07/01
Voltage Ratings
Part number
VR Max. DC Reverse Voltage (V)
VRWM Max. Working Peak Reverse Voltage (V)
209CNQ135
135
209CNQ150
150
Absolute Maximum Ratings
IF(AV)
IFSM
EAS
IAR
Parameters
Max.AverageForward (Per Leg)
Current * See Fig. 5 (PerDevice)
Max.PeakOneCycleNon-Repetitive
SurgeCurrent (Per Leg) *SeeFig.7
Non-RepetitiveAvalancheEnergy
(Per Leg)
RepetitiveAvalancheCurrent
(Per Leg)
209CNQ Units Conditions
100
200
10,000
1200
15
A 50%dutycycle@TC=118°C,rectangularwaveform
A
5µs Sineor3µsRect.pulse
Following any rated
load condition and with
10ms Sine or 6ms Rect. pulse rated VRRMapplied
mJ TJ = 25 °C, IAS = 1 Amps, L = 30 mH
1 A Current decaying linearly to zero in1µsec
Frequency limited by TJ max. VA = 1.5 x VR typical
Electrical Specifications
Parameters
209CNQ Units Conditions
VFM Max. Forward Voltage Drop
(Per Leg) * See Fig. 1
(1)
IRM Max. Reverse Leakage Current
(Per Leg) * See Fig. 2 (1)
CT Max. Junction Capacitance (Per Leg)
LS Typical Series Inductance (Per Leg)
dv/dt Max. Voltage Rate of Change
(Rated VR)
1.03
1.22
0.71
0.82
3
45
3000
7.0
10000
V @ 100A
V @ 200A
V @ 100A
V @ 200A
TJ = 25 °C
TJ = 125 °C
mA TJ = 25 °C
mA TJ = 125 °C
VR = rated VR
pF VR = 5VDC, (test signal range 100Khz to 1Mhz) 25°C
nH From top of terminal hole to mounting plane
V/ µs
Thermal-Mechanical Specifications
(1) Pulse Width < 300µs, Duty Cycle <2%
Parameters
209CNQ Units Conditions
TJ Max.JunctionTemperatureRange
Tstg Max.StorageTemperatureRange
RthJC Max.Thermal Resistance Junction
to Case (Per Leg)
RthJC Max.Thermal Resistance Junction
to Case(Per Package)
RthCS Typical Thermal Resistance,Case
to Heatsink
wt Approximate Weight
T MountingTorque
Min.
Max.
Mounting Torque Center Hole Typ.
TerminalTorque
Min.
Max.
Case Style
-55to175
-55to175
0.40
°C
°C
°C/W DC operation
* See Fig. 4
0.20 °C/W DC operation
0.10 °C/W Mounting surface,smooth and greased
79(2.80) g(oz.)
24(20)
35(30)
13.5(12)
35(30)
Kg-cm
(Ibf-in)
46(40)
TO-244AB Modified JEDEC
2 www.irf.com