V048K020T080.pdf 데이터시트 (총 15 페이지) - 파일 다운로드 V048K020T080 데이타시트 다운로드

No Preview Available !

www.DataSheet4U.com
VTM
V•I ChipTM – VTM
Voltage Transformation Module
V048K020T080
K indicates BGA configuration. For other
mounting options see Part Numbering below.
• 48 V to 2 V V•I Chip Converter
• 80 A (120 A for 1 ms)
• High density – 320 A/in3
• 125°C operation
• 1 µs transient response
• >3.5 million hours MTBF
Vf = 26 - 55 V
VOUT = 1.1 - 2.3 V
IOUT = 80 A
K = 1/24
ROUT = 1.5 mmax
©
• Small footprint – 75 A/in2
• Typical efficiency 94% at 2 V/50 A
• Low weight – 0.5 oz (14 g)
• No output filtering required
• Pick & Place / SMD
• BGA or J-Lead packages
Actual size
Product Description
Absolute Maximum Ratings
The V048K020T080 VI Chip Voltage Transformation
Module (VTM) breaks records for speed, density and
Parameter
Values
Unit
Notes
efficiency to meet the demands of advanced DSP,
FPGA, ASIC, processor cores and microprocessor
applications at the point of load (POL) while providing
+In to -In
+In to -In
-1.0 to 60.0
Vdc
100 Vdc For 100 ms
isolation from input to output. It achieves a response
PC to -In
-0.3 to 7.0
Vdc
time of less than 1 µs and delivers up to 80 A in a
TM to -In
-0.3 to 7.0
Vdc
volume of less than 0.25 in3 while providing low output
voltages with unprecedented efficiency. It may be
paralleled to deliver hundreds of amps at an output
voltage settable from 1.1 to 2.3 Vdc.
P R E L I M I N A RYThe VTM V048K020T080’s nominal output voltage is
2 Vdc from a 48 Vdc input factorized bus, Vf, and is
controllable from 1.1 to 2.3 Vdc at no load, and from
1.1 to 2.2 Vdc at full load, over a Vf input range of 26
to 55 Vdc. It can be operated either open- or closed-loop
depending on the output regulation needs of the
application. Operating open-loop, the output voltage
tracks its Vf input voltage with a transformation ratio,
K = 1/24, and an output resistance, ROUT = 1.3 milliohm, to
enable applications requiring a programmable low
output voltage at high current and high efficiency.
VC to -In
-0.3 to 19.0
Vdc
+Out to -Out
-0.1 to 4.0
Vdc
Isolation voltage
Operating junction temperature
2,250
-40 to 125
Vdc Input to Output
°C See Note
Output current
80 A Continuous
Peak output current
Case temperature during reflow
120
208
A For 1 ms
°C
Storage temperature
-40 to 150
°C
Output power
Peak output power
174 W Continuous
261 W For 1 ms
Note: The referenced junction is defined as the semiconductor having the highest temperature.
This temperature is monitored by the temperature monitor (TM) signal and by a shutdown comparator.
Closing the loop back to an input Pre-Regulation
Module (PRM) or DC-DC converter can compensate
for ROUT.
Part Numbering
The 2 V VTM achieves break-through current density of
320 A/in3 in a VI Chip package compatible with
standard pick-and-place and surface mount assembly
processes. The VI Chip BGA package supports in-board
mounting with a low profile of 0.16" (4 mm) over the
board. A J-lead package option supports on-board
surface mounting with a profile of only 0.25" (6 mm)
over the board. The VTM’s fast dynamic response and
low noise eliminate the need for bulk capacitance at the
load, substantially increasing the POL density while
improving reliability and decreasing cost.
V 048
Voltage
Transformation
Module
Input Voltage
Designator
K
Configuration Options
F = On-board (Fig.15)
K = In-board (Fig.14)
020 T 080
Output Voltage
Designator
(=VOUT x10)
Output Current
Designator
(=IOUT)
Product Grade Temperatures (°C)
Grade Storage Operating
T -40 to150 -40 to125
Vicor Corporation
Tel: 800-735-6200
vicorpower.com
V•I Chip Voltage Transformation Module V048K020T080 Rev. 1.2
Page 1 of 15

No Preview Available !

Specifications
INPUT (Conditions are at 48 Vin, full load, and 25°C ambient unless otherwise specified)
Parameter
Input voltage range
Input dV/dt
Input overvoltage turn-on
Input overvoltage turn-off
Input current
Input reflected ripple current
No load power dissipation
Internal input capacitance
Internal input inductance
Min Typ Max Unit
Note
26 48 55 Vdc Operable down to zero V with external bias voltage
1 V/µs
56.0 Vdc
59.5 Vdc
3.7 Adc
170
mA p-p
Using test circuit in Fig.16; See Fig.1
2.50 3.15
W
4 µF
20 nH
OUTPUT (Conditions are at 48 Vin, full load, and 25°C ambient unless otherwise specified)
Parameter
Rated DC current
P R E L I M I N A RYPeakrepetitivecurrent
DC current limit
Current share accuracy
Efficiency
Half load
Full load
Internal output inductance
Internal output capacitance
Load capacitance
Output overvoltage setpoint
Min Typ Max Unit
0 80 Adc
120 A
82 99 112 Adc
5 10 %
94.0 94.2
%
93.0 93.2
%
0.8 nH
306 µF
56,300
µF
2.33 Vdc
Note
Max pulse width 1ms, max duty cycle 10%,
baseline power 50%
See Parallel Operation on page 10
See Fig.3, 2 Vout
See Fig.3, 2 Vout
Effective value
Output ripple voltage
No external bypass
53 65 mV See Figs.2 and 5
100 µF bypass capacitor
2 mV See Fig.6
Effective switching frequency
2.52 2.65 2.78 MHz
Fixed, 1.33 MHz per phase
Line regulation
K
0.0413
1/24 0.0421
VOUT = K•VIN at no load
Load regulation
ROUT
1.3 1.5 m
See Fig.19
Transient response
Voltage overshoot
20 mV 80 A load step with 100 µF CIN; See Figs.7 and 8
Response time
200 ns See Figs.7 and 8
Recovery time
1 µs See Figs.7 and 8
Vicor Corporation
Tel: 800-735-6200
vicorpower.com
V•I Chip Voltage Transformation Module V048K020T080 Rev. 1.2
Page 2 of 15

No Preview Available !

Specifications
WAVEFORMS
Figure 1— Input reflected ripple current at full load and 48 Vin
Output Ripple vs Load
60
50
40
30
20
10
0
0 10 20 30 40 50 60 70 80
Output Currrent (A)
Figure 2— Output voltage ripple vs. output current at 2 Vout
with no POL bypass capacitance.
Efficiency vs. Output Current
95
94
93
92
91
90
89
88
87
86
85
0
2.0 V
1.8 V
1.5 V
1.2 V
10 20 30 40 50 60 70 80
Output Current (A)
Figure 3— Efficiency vs. output current and output voltage
Power Dissipation vs. Output Current
14
12 2.0V
1.8V
1.5V
10 1.2V
8
6
4
2
0
0 10 20 30 40 50 60 70 80
Output Current (A)
Figure 4—Power dissipation as a function of output current and
output voltage
Figure 5— Output voltage ripple at full load and 2 Vout;
without any external bypass capacitor.
Figure 6—Output voltage ripple at full load and 2 Vout with
100 µF ceramic external bypass capacitance and 20 nH
distribution inductance.
Vicor Corporation
Tel: 800-735-6200
vicorpower.com
V•I Chip Voltage Transformation Module V048K020T080 Rev. 1.2
Page 3 of 15