MB95F133MS MB95F133NS MB95F133MW MB95F133NW MB95F133JS MB95F133JW
MB95F134MS MB95F134NS MB95F134MW MB95F134NW MB95F134JS MB95F134JW
MB95F136MS MB95F136NS MB95F136MW MB95F136NW MB95F136JS MB95F136JW
8/16-bit Each channel of the timer can be used as "8-bit timer x 2 channels" or "16-bit timer x 1 channel".
compound Built-in timer function, PWC function, PWM function, capture function and square wave-form output
Count clock: 7 internal clocks and external clock can be selected.
PWM mode or one-shot mode can be selected.
16-bit PPG Counter operating clock: Eight selectable clock sources
Support for external trigger start
Each channel of the PPG can be used as "8-bit PPG x 2 channels"
Counter operating clock: Eight selectable clock sources
Count clock : Four selectable clock sources (125 ms, 250 ms, 500 ms, or 1 s)
Counter value can be set from 0 to 63. (Capable of counting for 1 minute when selecting clock
source 1 second and setting counter value to 60)
Four selectable interval times (125 ms, 250 ms, 500 ms, or 1 s)
Interrupt by edge detection (rising, falling, or both
Can be used to recover from standby modes.
Supports automatic programming, Embedded AlgorithmTM *4
A flag indicating completion of the algorithm
Number of write/erase cycles (Minimum) : 10000 times
Flash memory Data retention time : 20 years
Erase can be performed on each block
Block protection with external programming voltage
Flash Security Feature for protecting the content of the Flash
Standby mode Sleep, stop, watch (for dual clock product), and timebase timer
*1 : For ROM capacity and RAM capacity, refer to “1. Memory space” in “■ CPU CORE”.
*2 : For details of option, refer to “■ MASK OPTION”.
*3 : Specify clock mode when ordering MASK ROM.
*4 : Embedded Algorithm is a trade mark of Advanced Micro Devices Inc.
Note : Part number of evaluation product in MB95130M series is MB95FV100D-103.
When using it, the MCU board (MB2146-303A) is required.