GJ9575.pdf 데이터시트 (총 4 페이지) - 파일 다운로드 GJ9575 데이타시트 다운로드

No Preview Available !

www.DataSheet4U.com
Pb Free Plating Product
ISSUED DATE :2005/03/18
REVISED DATE :
GJ9575
P-CHANNEL ENHANCEMENT MODE POWER MOSFET
BVDSS
RDS(ON)
ID
-60V
90m
-15A
Description
The GJ9575 provide the designer with the best combination of fast switching, ruggedized device design, low
on-resistance and cost-effectiveness.
The TO-252 package is universally preferred for all commercial-industrial surface mount applications and
suited for low voltage applications such as DC/DC converters.
Features
*Simple Drive Requirement
*Lower On-resistance
*Fast Switching Characteristic
Package Dimensions
TO-252
Absolute Maximum Ratings
Parameter
Symbol
Drain-Source Voltage
Gate-Source Voltage
Continuous Drain Current, VGS@10V
VDS
VGS
ID @TC=25
Continuous Drain Current, VGS@10V
Pulsed Drain Current1
ID @TC=100
IDM
Total Power Dissipation
PD @TC=25
Linear Derating Factor
Operating Junction and Storage Temperature Range Tj, Tstg
Thermal Data
Parameter
Thermal Resistance Junction-case
Thermal Resistance Junction-ambient
Max.
Max.
Symbol
Rthj-c
Rthj-a
REF.
A
B
C
D
E
F
S
Millimeter
Min. Max.
6.40 6.80
5.20 5.50
6.80 7.20
2.40 3.00
2.30 REF.
0.70 0.90
0.60 0.90
REF.
G
H
J
K
L
M
R
Millimeter
Min. Max.
0.50 0.70
2.20 2.40
0.45 0.55
0 0.15
0.90 1.50
5.40 5.80
0.80 1.20
Ratings
-60
±25
-15
-9.5
-45
36
0.29
-55 ~ +150
Unit
V
V
A
A
A
W
W/
Value
3.5
110
Unit
/W
/W
GJ9575
Page: 1/4

No Preview Available !

ISSUED DATE :2005/03/18
REVISED DATE :
Electrical Characteristics (Tj = 25 unless otherwise specified)
Parameter
Symbol Min. Typ. Max. Unit
Test Conditions
Drain-Source Breakdown Voltage
Breakdown Voltage Temperature Coefficient
Gate Threshold Voltage
Forward Transconductance
Gate-Source Leakage Current
BVDSS
BVDSS / Tj
VGS(th)
gfs
IGSS
-60
-
-1.0
-
-
-
-0.06
-
14
-
-
-
-3.0
-
±100
V VGS=0, ID=-250uA
V/ Reference to 25 , ID=-1mA
V VDS=VGS, ID=-250uA
S VDS=-10V, ID=-9A
nA VGS= ±25V
Drain-Source Leakage Current(Tj=25 )
Drain-Source Leakage Current(Tj=150 )
IDSS
-
-
- -1 uA VDS=-60V, VGS=0
- -25 uA VDS=-48V, VGS=0
Static Drain-Source On-Resistance2 RDS(ON)
-
-
- 90 m VGS=-10V, ID=-12A
- 120
VGS=-4.5V, ID=-9A
Total Gate Charge2
Gate-Source Charge
Gate-Drain (“Miller”) Change
Qg - 17 27
ID=-9A
Qgs - 5 - nC VDS=-48V
Qgd - 6 -
VGS=-4.5V
Turn-on Delay Time2
Rise Time
Turn-off Delay Time
Fall Time
Td(on) - 10 -
VDS=-30V
Tr
Td(off)
-
-
19
46
-
-
ID=-9A
ns VGS=-10V
RG=3.3
Tf - 53 -
RD=3.3
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
Ciss
Coss
Crss
- 1660 2660
VGS=0V
- 160 -
pF VDS=-25V
- 100 -
f=1.0MHz
Source-Drain Diode
Parameter
Forward On Voltage2
Reverse Recovery Time2
Reverse Recovery Charge
Symbol
VSD
Trr
Qrr
Min.
-
-
-
Typ.
-
56
159
Max.
-1.2
-
-
Unit Test Conditions
V IS=-9A, VGS=0V
ns IS=-9A, VGS=0V
nC dI/dt=100A/ s
Notes: 1. Pulse width limited by safe operating area.
2. Pulse width 300us, duty cycle 2%.
GJ9575
Page: 2/4

No Preview Available !

Characteristics Curve
ISSUED DATE :2005/03/18
REVISED DATE :
Fig 1. Typical Output Characteristics
Fig 2. Typical Output Characteristics
Fig 3. On-Resistance v.s. Gate Voltage
Fig 4. Normalized On-Resistance
v.s. Junction Temperature
Fig 5. Forward Characteristics of
Reverse Diode
GJ9575
Fig 6. Gate Threshold Voltage v.s.
Junction Temperature
Page: 3/4

No Preview Available !

ISSUED DATE :2005/03/18
REVISED DATE :
Fig 7. Gate Charge Characteristics
Fig 8. Typical Capacitance Characteristics
Fig 9. Maximum Safe Operating Area Fig 10. Effective Transient Thermal Impedance
Fig 11. Switching Time Waveform
Fig 12. Gate Charge Waveform
Important Notice:
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of GTM.
GTM reserves the right to make changes to its products without notice.
GTM semiconductor products are not warranted to be suitable for use in life-support Applications, or systems.
GTM assumes no liability for any consequence of customer product design, infringement of patents, or application assistance.
Head Office And Factory:
Taiwan: No. 17-1 Tatung Rd. Fu Kou Hsin-Chu Industrial Park, Hsin-Chu, Taiwan, R. O. C.
TEL : 886-3-597-7061 FAX : 886-3-597-9220, 597-0785
China: (201203) No.255, Jang-Jiang Tsai-Lueng RD. , Pu-Dung-Hsin District, Shang-Hai City, China
TEL : 86-21-5895-7671 ~ 4 FAX : 86-21-38950165
GJ9575
Page: 4/4