DBA500G.pdf 데이터시트 (총 3 페이지) - 파일 다운로드 DBA500G 데이타시트 다운로드

No Preview Available !

www.DataSheet4U.com
Ordering number : ENA0699
DBA500G
SANYO Semiconductors
DATA SHEET
DBA500G
Diffused Junction Silicon Diode
50A Single-Phase Bridge Rectifier
Features
Plastic molded structure.
Peak reverse voltage : VRM=600V.
Average output current : IO=50A.
Specifications
Absolute Maximum Ratings at Tc=25°C
Parameter
Peak Reverse Voltage
Average Output Current
Surge Forward Current
Current Squared Time
Junction Temperature
Storage Temperature
Dilective Strength Voltage
Tightening Torque
Symbol
VRM
IO
IFSM
I2t
Tj
Tstg
Vdis
TOR
Conditions
50Hz sine 1cycle peak value, Tc=95°C, with heatsink
50Hz sine wave, non-repetitive, 1cycle peak value, Tj=25°C
1mst<10ms, Tj=25°C, Rating of per diode
Terminals tc case, AC 1 minute
( ): recommended value
Electrical Characteristics at Tc=25°C Per Constituent element of bridge.
Parameter
Forward Voltage
Reverse Current
Thremal Resistance
Marking: BA500G
Symbol
VF
IR
Rth(j-c)
Conditions
IF=25A
VR=600V
With heatsink (Junction-Case)
min
Ratings
600
50
500
800
150
--40 to +150
2
0.8(0.6)
Unit
V
A
A
A2s
°C
°C
kV
N•m
Ratings
typ
max
1.05
10
0.5
Unit
V
µA
°C / W
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
62007RB TI IM TC-00000624 No. A0699-1/3

No Preview Available !

Package Dimensions
unit : mm (typ)
7806-001
11.5MAX
5.0
24.0MAX
1.5
4.0
1.8
2.4
*
DBA500G
9.0
R1.75
36.0MAX
13.1
12.5
9.0
7.0 C3.7
1
3
4
6.35
7.0
2
3.5
12.8
* : In case of over 30A of IO. bigger fasten hole should be filled by solder.
Lead-Wire with solder connection also requested for over 30A of IO.
Electrical Connection
100
7
5
3
2
10
7
5
3
2
1.0
7
5
3
2
0.1
0
0.2
120
Tj=150°C
IF -- VF
0.4 0.6 0.8 1.0
Forward Voltage, VF -- V
PF -- IO
100
1.2 1.4
IT12123
80
60 SIN
40
20
0
0 10 20 30 40 50 60
Average Output Current, IO -- A IT12125
60
SIN
50
IO -- Tc
40
30
20
10
0
0 20 40 60 80 100 120 140 160
Case Temperature, Tc -- °C
IT12124
IFSM -- n
600
Tj=25°C
50Hz
500
400
300
200
100
0
1.0
23
5 7 10
23
Number of Cycles, n
5 7 100
IT12126
No. A0699-2/3

No Preview Available !

DBA500G
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using
products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd.
products described or contained herein.
SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all
semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or
malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise
to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt
safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not
limited to protective circuits and error prevention circuits for safe design, redundant design, and structural
design.
In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are
controlled under any of applicable local export control laws and regulations, such products may require the
export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise,
without the prior written consent of SANYO Semiconductor Co.,Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the
SANYO Semiconductor Co.,Ltd. product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed
for volume production.
Upon using the technical information or products described herein, neither warranty nor license shall be granted
with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third
party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's
intellctual property rights which has resulted from the use of the technical information and products mentioned
above.
This catalog provides information as of June, 2007. Specifications and information herein are subject
to change without notice.
PS No. A0699-3/3