7100MD9AV2BE.pdf 데이터시트 (총 20 페이지) - 파일 다운로드 7100MD9AV2BE 데이타시트 다운로드

No Preview Available !

www.DataSheet4U.com
C&K 7000 Series
Rocker and Lever Handle Switches
Models Available
Features/Benefits
S Multi-pole and multi-position
S Wide variety of actuator and
termination options
S Epoxy sealed terminals prevent
contamination during soldering
Typical Applications
S Telecommunications
S Instrumentation
S Medical equipment
Build-A-Switch
Our easy Build-A-Switch concept allows you to mix and match options to create the switch you need. Below is a complete listing
of options shown in catalog. To order, simply select desired option from each category and place in the appropriate box. Switches
with standard options are shown on pages F-4 and F-5. Available options are shown and described on pages F-6 thru F-22.
For additional options not shown in catalog, consult Customer Service Center. All models have epoxy terminal seal and are
compatible with all “bottom-wash” PCB cleaning methods.
Typical Example: 7 1 0 1
J1
Z
QE2
Switch Function
7101 (STD.) SP OnĆNoneĆOn
7103 (STD.) SP OnĆOffĆOn
7201 (STD.) DP OnĆNoneĆOn
7301 (STD.) 3P OnĆNoneĆOn
7401 (STD.) 4P OnĆNoneĆOn
7105 SP Mom.ĆOffĆMom.
7107 SP OnĆOffĆMom.
7108 SP OnĆNoneĆMom.
7109 SP NoneĆOnĆMom.
7203 DP OnĆOffĆOn
7205 DP Mom.ĆOffĆMom.
7207 DP OnĆOffĆMom.
7208 DP OnĆNoneĆMom.
7209 DP NoneĆOnĆMom.
7211 DP OnĆOnĆOn
7213 DP OnĆOnĆMom.
7215 DP Mom.ĆOnĆMom.
7303 3P OnĆOffĆOn
7305 3P Mom.ĆOffĆMom.
7307 3P OnĆOffĆMom.
7308 3P OnĆNoneĆMom.
7309 3P NoneĆOnĆMom.
7403 4P OnĆOffĆOn
7405 4P Mom.ĆOffĆMom.
7407 4P OnĆOffĆMom.
7408 4P OnĆNoneĆMom.
7409 4P NoneĆOnĆMom.
7411 4P OnĆOnĆOn
7413 4P OnĆOnĆMom.
7415 4P Mom.ĆOnĆMom.
Note: UL/CSA models
available, see page F-6.
Actuator
J1 (STD.) Rocker
J2 Lever
J3 Rocker
J8 Rocker
J10 Rocker
J11 Rocker with frame
J15 Rocker with frame, snapĆin
J16 Rocker, snapĆin
J19 Rocker with frame
J21 Lever with frame
J25 Lever, snapĆin
J26 Lever with frame, snapĆin
J37 Rocker with frame
J50 Rocker
J51 Rocker with frame
J52 Rocker with frame & LED, snapĆin
J53 Rocker, snapĆin
J60 Lever
J61 Lever with frame, snapĆin
J62 Lever with frame & LED, snapĆin
J63 Lever, snapĆin
J76 Rocker with frame, snapĆin
J90 Lever
J91 Lever with frame, snapĆin
J92 Lever with frame & LED, snapĆin
J93 Lever, snapĆin
Contact Material
B (STD.) Gold
Q (STD.) Silver
K Gold
Terminations
M Silver
A (STD.) Right angle, PC thruĆhole
G Gold over silver
AV2 (STD.) Vertical right angle, PC thruĆhole L Gold over silver
C (STD.) PC ThruĆhole
Z (STD.) Solder lug
A3 Right angle, snapĆin, PC thruĆhole
AV3 Vertical right angle,
Seal
E (STD.) Epoxy
I Epoxy potted base
snapĆin, PC thruĆhole
AW Right angle, extended, PC thruĆhole
AW1 Right angle, extended, PC thruĆhole
AW3 Right angle, extended, PC thruĆhole
AW4 Right angle, extended, PC thruĆhole
V2 .555 high, VĆbracket
V3 .460 high, VĆbracket
V4 .630 high, VĆbracket
V5 Vertical right angle, PC thruĆhole
V6 .460 high, VĆbracket
Actuator Color
2 (STD.) Black
1 White
3 Red
Frame Color
2 (STD.) Black
NONE No frame color required
1 White
3 Red
V7 .630 high, VĆbracket
Metal Frame Color
V8 .953 high, VĆbracket
(J11, J19, J21, J37 Actuators)
V9 1.150 high, VĆbracket
2 (STD.) Black
V21 .555 high, VĆbracket, snapĆin
1 White
V31 .460 high, VĆbracket, snapĆin
C Bright chrome
V41 .630 high, VĆbracket, snapĆin
S Satin chrome
V51 Vertical right angle, snapĆin
V54 Vertical right angle, extended W .750 long, wire wrap
V55 Vertical right angle, extended W1 .964 long, wire wrap
V61 .460 high, VĆbracket, snapĆin W3 .425 long, wire wrap
V71 .630 high, VĆbracket, snapĆin W4 1.062 long, wire wrap
V81 .953 high, VĆbracket, snapĆin W5 1.305 long, wire wrap
V91 1.150 high, VĆbracket, snapĆin Z3 Quick connect
ITT Industries
Cannon
F-3
www.ittcannon.com
F

No Preview Available !

C&K 7000 Series
wwRwo.DactakSeheret4aUn.codm Lever Handle Switches
Specifications
CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or
DC max. Q contact material: 5 AMPS @ 120 V AC or 28 V DC;
2 AMPS @ 250 V AC. See page F-22 for additional ratings.
ELECTRICAL LIFE: 7X01 and UX1 models: 100,000 make-and-break
cycles at full load. All other models: 40,000 cycles.
CONTACT RESISTANCE: Below 10 milliohms typ. initial @ 2-4
V DC, 100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 109 ohms min.
DIELECTRIC STRENGTH: 1000 V RMS min. @ sea level.
OPERATING TEMPERATURE: –30_C to 85_C.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Materials
CASE: Glass filled nylon 6/6, flame retardant, heat stabilized, or
diallyl phthalate (DAP) (UL 94V-0).
ACTUATOR: Nylon, black.
FRAME (FRONT MOUNT): Nylon, black.
FRAME (REAR MOUNT): Spring steel, black.
BUSHING: Brass or zinc, nickel plated.
HOUSING: Stainless steel.
SWITCH SUPPORT: Brass or steel, tin plated.
END CONTACTS: B contact material: Copper alloy, with gold plate over
nickel plate. Q contact material: Coin silver, silver plated. See page
F-22 for additional contact materials.
CENTER CONTACTS & ALL TERMINALS: B contact material: Copper
alloy, with gold plate over nickel plate. Q contact material: Copper
alloy, silver plated. See page F-22 for additional contact materials.
TERMINAL SEAL: Epoxy.
HARDWARE: Mounting nuts & screws: Brass. Lockwasher: Stainless
steel. Standoff: Nylon standard, aluminum available, consult
Customer Service Center.
SWITCHES WITH STANDARD OPTIONS
7101J1ZQE2
SPDT
PART NUMBER
7101J1ZQE2
ÑÑÑÑÑÑPOS. 1 POS. 2 POS. 3
ON NONE ON
NOTE: For PC termination, replace ‘Z’ with ‘C’.
For panel mounting information, see page F-7.
F
7201J1ZQE2
DPDT
ITT Industries
Cannon
F-4
PART NUMBER
7201J1ZQE2
ÑÑÑÑÑÑPOS. 1 POS. 2 POS. 3
ON NONE ON
NOTE: For PC termination, replace ‘Z’ with ‘C’.
For panel mounting information, see page F-7.
www.ittcannon.com

No Preview Available !

www.DataSheet4U.com
C&K 7000 Series
Rocker and Lever Handle Switches
SWITCHES WITH STANDARD OPTIONS
PART NUMBER
7301J1ZQE2
ÑÑÑÑPOS. 1 POS. 2 POS. 3
ON NONE ON
NOTE: For PC termination, replace ‘Z’ with ‘C’.
For panel mounting information, see page F-7.
7301J1ZQE2
3PDT
PART NUMBER
7401J1ZQE2
ÑÑÑÑPOS. 1 POS. 2 POS. 3
ON NONE ON
NOTE: For PC termination, replace ‘Z’ with ‘C’.
For panel mounting information, see page F-7.
PART NUMBER
7101J1ABE2
7101J1AQE2
7103J1ABE2
ÑÑÑÑPOS. 1 POS. 2 POS. 3
ON NONE ON
ON NONE ON
ON OFF ON
NOTE: For PC mounting information, see page F-15.
PART NUMBER
7301J1AV2QE2
ÑÑÑÑÑÑPOS. 1 POS. 2 POS. 3
ON NONE ON
NOTE: For PC mounting information, see page F-17.
ITT Industries
Cannon
F-5
7401J1ZQE2
4PDT
SECTION A-A
7101J1ABE2
Horizontal Actuation
SPDT
F
SECTION A-A
7301J1AV2QE2
Vertical Actuation
3PDT
www.ittcannon.com