U0805CxxxxxT.pdf 데이터시트 (총 19 페이지) - 파일 다운로드 U0805CxxxxxT 데이타시트 다운로드

No Preview Available !

www.DataSheet4U.com
Nickel Barrier
Multilayer Ceramic Capacitors
Features:
Multilayer ceramic chip capacitor.
Nickel barrier termination.
High performance and reliability.
0603, 0805, and 1206 case size.
Rated Voltage
Code
Rated Voltage
A
B
T
U
Part Dimension
100
16
25
50
Length
(L)
1.6 ±0.1
2.0 ±0.2
3.2 ±0.2
Width
(W)
Maximum
Thickness
(T)
0.8 ±0.1
1.25 ±0.1
1.40
1.60 ±0.2
1.52
Dimensions
Minimum
MB
0.20
0.25
Minimum
G
0.40
0.70
1.40
Voltage
(V)
6.3 ~ 50
6.3 ~ 500
6.3 ~ 1000
Type
0603
0805
1206
Page 1
27/04/06 V1.0

No Preview Available !

www.DataSheet4U.com
Nickel Barrier
Multilayer Ceramic Capacitors
Temperature Characteristics Code
Code
Temperature Coefficient
Operation Temperature
(°C)
C NPO (Class I)
R X7R (Class II)
-55°C ~ +125
F Y5V (Class II)
30°C ~ +85
Capacitance Change
0 ±30ppm/°C
±15%
+22% ~ -82%
Capacitance Code
Code
010
Capacitance
(pF)
1*
1R5 1.5
100 10*
101 100*
102 1000*
103 10000*
222 2200*
472 4700*
Tolerance Code
Code
Tolerance
(%)
J ±5
K ±10
Z +80/-20
PS:
· * -- Two significant digits followed by number of zeros.
· Temperature coefficient (T.C.) vs. Proper tolerance applied:
NPO:
For all tolerance
X7R+X5R:
K+M Tolerance
Y5V+Z5U:
M+Z Tolerance
Termination Code
Code
N
Termination Type
Nickel
Packaging Code
Code
Packaging Type
BT
Bulk Tape and Reel
Standard Test Conditions
Tests shall, unless otherwise specified, be carried out at 15 to 35°C and RH 45 to 75%.If any doubt and argument has been
encounter in judgement, the final test shall be done at 25 ±2°C, RH45 to 55% and 860 ~ 1060mbar. (Based on JIS standard).
Disposition
If question to the measuring result in judgement, take the capacitor under a specified temperature for 30 minutes at least before
measurement.
Page 2
27/04/06 V1.0

No Preview Available !

www.DataSheet4U.com
Nickel Barrier
Multilayer Ceramic Capacitors
Structure
Ag/Pd Series
Number
1
2
3
4
5
Specifications
Ceramic Dielectric
Internal Electrode
End Terminal
Material
Ceramic
Ag-Pd
Ag layer
Ni layer
Sn-Pb layer or Sn layer
Minimum Termination
Plating Thickness
(µ m)
40
1.5 - 3.5
3-8
BME Series
Number
1
2
3
4
5
Specifications
Ceramic Dielectric
Internal Electrode
End Termination
Material
Ceramic
Ni
Cu layer
Ni layer
Sn-Pb layer or Sn layer
Minimum Termination
Plating Thickness
(µ m)
40
1.5 - 3.5
3-8
Storing Condition And Term
Recommends the storing of products within 6 months at temperature 15 ~ 35°C and humidity 70%RH maximum. If the product stored
over 6 months, please reconfirm its solderability before use.
Page 3
27/04/06 V1.0