D1048.pdf 데이터시트 (총 3 페이지) - 파일 다운로드 D1048 데이타시트 다운로드

No Preview Available !

Ordering number : ENN694F
2SB815 / 2SD1048
PNP / NPN Epitaxial Planar Silicon Transistors
2SB815 / 2SD1048
General-Purpose AF Amplifier Applications
Features
Ultrasmall package allows miniaturization
in end products.
Large current capacity (IC=0.7A) and low-saturation
www.DataSheet4U.covmoltage.
Package Dimensions
unit : mm
2018B
[2SB815 / 2SD1048]
0.4
3
0.16
0 to 0.1
Specifications
( ) : 2SB815
Absolute Maximum Ratings at Ta=25°C
Parameter
Collector-to-Base Voltage
Collector-to-Emitter Voltage
Emitter-to-Base Voltage
Collector Current
Collector Current (Pulse)
Collector Dissipation
Junction Temperature
Storage Temperature
Symbol
VCBO
VCEO
VEBO
IC
ICP
PC
Tj
Tstg
1 0.95 0.95 2
1.9
2.9
1 : Base
2 : Emitter
3 : Collector
SANYO : CP
Conditions
Ratings
(--)20
(--)15
(--)5
(--)0.7
(--)1.5
200
125
--55 to +125
Unit
V
V
V
A
A
mW
°C
°C
Electrical Characteristics at Ta=25°C
Parameter
Symbol
Conditions
Collector Cutoff Current
Emitter Cutoff Current
DC Current Gain
ICBO
IEBO
hFE1
hFE2
VCB=(--)15V, IE=0
VEB=(--)4V, IC=0
VCE=(--)2V, IC=(--)50mA
VCE=(--)2V, IC=(--)500mA
* : The 2SB815, 2SD1048 are classified by 50mA hFE as follows :
2SB815 200
B6
400 300
B7
600
2SD1048 200
X6
400 300
X7
600 450
X8
Note : Marking : B (2SB815), X (2SD1048)
hFE rank : 6, 7 (2SB815), 6, 7, 8 (2SD1048)
900
min
(200*)200*
80
Ratings
typ
max
(--)0.1
(--)0.1
(600*)900*
Unit
µA
µA
Continued on next page.
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft's
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
41301 TS IM / 91098 HA (KT) / 8258MO / 4017 KI / 2173 KI, TS No.694-1/3

No Preview Available !

Continued from preceding page.
Parameter
Gain-Bandwidth Product
Output Capacitance
Collector-to-Emitter Saturation Voltage
2SB815 / 2SD1048
Symbol
Conditions
fT
Cob
VCE(sat)1
VCE(sat)2
VCE=(--)10V, IC=(--)50mA
VCB=(--)10V, f=1MHz
IC=(--)5mA, IB=(--)0.5mA
IC=(--)100mA, IB=(--)10mA
Ratings
min typ max
Unit
250 MHz
(13)8
pF
(--15)10 (--35)25 mV
(--60)30 (--120)80 mV
www.DataSheet4U.com
--800
--700
--600
--500
--400
IC -- VCE
2SB815
--30mA
--10mA
--6mA
--300 --2mA
--200 --1mA
--100
IB=0
0
0 --0.1 --0.2 --0.3 --0.4 --0.5
Collector-to-Emitter Voltage, VCE -- V ITR08396
IB -- VBE
100
(For PNP, minus sign is omitted.)
VCE=5V
80
60
40
20
0
0
1000
7
5
3
2
0.2 0.4 0.6 0.8 1.0
Base-to-Emitter Voltage, VBE -- V ITR08398
hFE -- IC
VCE=2V
2SD1048
2SB815
100
7
5
3
2
(For PNP, minus sign is omitted.)
10
1.0 2 3 5 10 2 3 5 100 2 3 5 1000 2 3 5
Collector Current, IC -- mA
ITR08400
IC -- VCE
800
2SD1048
700
600 6mA
4mA
500
400 2mA
300 1mA
200
100
0
0
1000
7
5
3
2
100
7
5
3
2
10
1.0
5
3
2
10
7
5
IB=0
0.1 0.2 0.3 0.4 0.5
Collector-to-Emitter Voltage, VCE -- V ITR08397
fT -- IC
VCE=10V
2SB815
2SD1048
(For PNP, minus sign is omitted.)
23
5 7 10
23
Collector Current, IC -- mA
Cob -- VCB
5 7 100
ITR08399
f=1MHz
2SB815
2SD1048
3
2
(For PNP, minus sign is omitted.)
1.0
5 7 1.0
23
5 7 10
23
5
Collector-to-Base Voltage, VCB -- V ITR08401
No.694-2/3

No Preview Available !

10000
5
3
2
1000
5
3
2
100
5
3
2
10
5
www.DataSheet4U.com 1.0
VCE(sat) -- IC
2SB815 / 2SD1048
IC / IB=10
300
250
200
150
2SB815
2SD1048
23
(For PNP, minus sign is omitted.)
5 10 2 3 5 100 2 3 5 1000
Collector Current, IC -- mA
ITR08402
100
50
0
0
PC -- Ta
20 40 60 80 100 120 140
Ambient Temperature, Ta -- °C ITR08403
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of April, 2001. Specifications and information herein are subject
to change without notice.
PS No.694-3/3