BRIGHT LED ELECTRONICS CORP.
1.Current transfer ratio (CTR: MIN. 50% at IF=5mA,
2.High input-output isolation voltage
3.Response time (tr: TYP. 4µs at VCE=2V, IC=2mA,
4.UL approved (NO.E236324)
5.CSA approved (NO.218896)
6.VDE approved (NO.40007240)
7.TUV approved (NO.R50029014)
8.This product doesn't contain restriction
substance, comply ROHS standard
1. The BPC-817 series are optically coupled
isolators containing a GaAs light emitting diode
and an NPN silicon phototransistor
2. The lead pitch is 2.54mm
2.System appliances, measuring instruments.
3.Registers, copiers, automatic vending machines.
4.Electric home appliances, such as fan heaters,
5.Signal transmission between circuits of different
potentials and impedances.
●Absolute Maximum Ratings (Ta=25℃)
● Outline Dimensions
*1. Year date code.
*2. 2-digit work week.
*3. Factory identification mark shall be marked.
*4. Rank shall be or shall not be marked.
Emitter- Collector Voltage
Collector Power Dissipation
Total Power Dissipation
*1 Isolation Voltage
Rated impulse isolation voltage
Rated repetitive peak isolation voltage
*2 Soldering Temperature
-30 to + 100
-55 to + 125
*1. AC For minute, R.H. =40~60%
Isolation voltage shall be measured using the following method.
(1) Short between anode and cathode on the primary side and between collector and emitter on the secondary side.
(2) The isolation voltage tester with zero-cross circuit shall be used.
(3) The waveform of applied voltage shall be a sine wave.
*2. For 10 Seconds
Ver.2.2 Page 1 of 6