91A1AB28E22.pdf 데이터시트 (총 6 페이지) - 파일 다운로드 91A1AB28E22 데이타시트 다운로드

No Preview Available !

Features
Available in a variety of pin-out
configurations
Virtually infinite electrical circuit isolation
Model 96 sealed for board wash
Metal or plastic shaft options
DPST and DPDT switch options
RoHS compliant versions available*
91, 92, 93, 94, 95, 96 - 5/8 ” Square Single-Turn Panel Control
97, 99 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Potentiometer Specifications
Initial Electrical Characteristics1
Conductive Plastic Element
Cermet Element
Standard Resistance Range
www.DataShLeineet4aUr T.caopmers (A, B, E, & H) ................................................................(B & E) 1 K ohms to 1 megohm ......................(A & H) 100 ohms to 1 megohm
Audio Tapers (C, D, F, G, S, & T).........................................................(D,G,S, & T) 1 K ohms to 1 megohm ..............(C & F) 1 K ohms to 1 megohm
Total Resistance Tolerance .....................................................................10 % or 20 % .................................................5% or 10%
Independent Linearity .............................................................................±5 %...............................................................±5 %
Absolute Minimum Resistance ...............................................................2 ohms maximum........................................... 2 ohms maximum
Effective Electrical Angle ........................................................................(Linear tapers) 240 ° ± 5 °...............................(Linear tapers) 240 ° ± 6 °
(Audio tapers) 225 ° ± 5 °
(Audio tapers) 225 ° ± 6 °
Contact Resistance Variation .................................................................±1 %...............................................................±1 % or 3 ohms (whichever is greater)
Dielectric Withstanding Voltage (MIL-STD-202, Method 301)
Sea Level............................................................................................1,500 VAC minimum.......................................1,500 VAC minimum
70,000 Feet ........................................................................................500 VAC minimum..........................................500 VAC minimum
Insulation Resistance (500 VDC) ............................................................1,000 megohms minimum..............................1,000 megohms minimum
Power Rating (Voltage Limited By Power Dissipation or 350 VAC, Whichever Is Less)
+70 °C Single Section Assembly .......................................................(Linear tapers) 0.5 watt...................................(Linear tapers) 2 watts
(Audio tapers) 0.25 watt
(Audio tapers) 1 watt
+70 °C Multiple Section Assembly.....................................................(Linear tapers) 0.5 watt/section......................(Linear tapers) 1 watt/section
(Audio tapers) 0.25 watt/section
(Audio tapers) 0.5 watt/section
+125 °C ..............................................................................................0 watt..............................................................0 watt
Theoretical Resolution ............................................................................Essentially infinite ...........................................Essentially infinite
Environmental Characteristics1
Operating Temperature Range ...............................................................-40 °C to +125 °C...........................................-40 °C to +125 °C
Storage Temperature Range...................................................................-55 °C to +125 °C...........................................-55 °C to +125 °C
Temperature Coefficient Over Storage Temperature Range...................±1,000 ppm/°C...............................................±150 ppm/°C
Vibration (Single Section)........................................................................15 G................................................................15 G
Total Resistance Shift.........................................................................±2 % maximum ..............................................±2 % maximum
Voltage Ratio Shift..............................................................................±5 % maximum ..............................................±5 % maximum
Shock (Single Section)............................................................................30 G................................................................30 G
Total Resistance Shift.........................................................................±2 % maximum ..............................................±2 % maximum
Voltage Ratio Shift..............................................................................±5 % maximum ..............................................±5 % maximum
Load Life.................................................................................................1,000 hours ....................................................1,000 hours
Total Resistance Shift.........................................................................±10 % maximum ............................................±5 % maximum
Rotational Life (No Load) ........................................................................100,000 cycles ...............................................100,000 cycles
Total Resistance Shift.........................................................................(Linear tapers) 10 ohms or ±15 % TRS max. ...(All tapers) ±5 % TRS max.
(whichever is greater)
(Audio tapers) ±20 % maximum
Contact Resistance Variation @ 50,000 cycles ..................................(Linear tapers) ±2 %.......................................±2 %
(Audio tapers) ±3 % .......................................±3 %
Moisture Resistance (MIL-STD-303, Method 103, Condition B)
Total Resistance Shift.........................................................................(Linear tapers) ±10 % TRS maximum ............(All tapers) ±5 % TRS maximum
(Audio tapers) ±20 % TRS maximum
Insulation Resistance (500 VDC) ........................................................100 megohms minimum.................................100 megohms minimum
IP Rating (Model 96) ...............................................................................IP 65 ...............................................................IP 65
(All Others)..........................................................................................IP 40 ...............................................................IP 40
*RoHS Directive 2002/95/EC Jan 27 2003 including Annex
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.

No Preview Available !

91, 92, 93, 94, 95, 96 - 5/8 ” Square Single-Turn Panel Control
97, 99 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Potentiometer Specifications
Mechanical Characteristics1
Stop Strength (1/4 ” D shaft)......................................................................................................................................................................45.19 N-cm (4 lb.-in.)
www.DataShMeeetc4hUa.nciocaml
(1/8 ” D shaft) ....................................................................................................................................................................33.89 N-cm (3 lb.-in.)
Angle ........................................................................................................................................................................................................300 ° ±5 °
Torque
Starting ....................................................................................................................................................................0.3 max. above average running torque
Running Torque
Single or Dual Section (A ,D & R Bushings) ..............................................................................................................0.21 to 1.06 N-cm (0.3 to 1.5 oz.-in.)
Single or Dual Section (C & U Bushings) ..................................................................................................................0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Mounting ............................................................................................................................................(Metal Bushing) 1.7-2.0 N-m (15-18 lb.-in.) maximum
Plastic Bushing) 56-79 N-cm (5-7 lb.-in.) maximum
Variation ................................................................................................................................................0.35 N-cm (0.5 oz.-in.) maximum in 45 ° shaft travel
Weight (Single Section, Plastic Bushing) ......................................................................................................................................................7.3 grams nominal
Weight (Single Section, Metal Bushing) ......................................................................................................................................................12.7 grams nominal
(Each Additional Section)..............................................................................................................................................................................4 grams nominal
Terminals ........................................................................................................................................................Printed circuit terminals, J-Hooks or solder lugs
Soldering Condition ......................................................................Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ” wire diameter.
Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean flux.
Marking............................................................................................................Manufacturer’s trademark, date code, resistance, manufacturer’s part number
Ganging (Multiple Section Potentiometers) ....................................................................................................................................................2 cups maximum
Hardware ............................................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number.
NOTE: ALL MODEL 90 PERFORMANCE SPECIFICATIONS DO NOT APPLY TO UNITS SUBJECTED TO PRINTED CIRCUIT BOARD CLEANING PROCEDURES, EXCEPT FOR THE SEALED
VERSION (MODEL 96).
1AT ROOM AMBIENT: +25 °C NOMINAL AND 50 % RELATIVE HUMIDITY NOMINAL, EXCEPT AS NOTED.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.

No Preview Available !

91, 92, 93, 94, 95, 96 - 5/8 ” Square Single-Turn Panel Control
97, 99 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Rotary Switch Specifications
Initial Electrical Characteristics1
Contacts:
www.DataShDDePPeSDt4TTU.......c....o....m.......................................................................................................................................................................................................................................................................................................................................................N.2.ON/.NO..O/N.,.NC..C(b./rNea.Ck.boerfoNr.eOm./Nak.Ce.)
Power Rating (Resistive Load):
DPST ................................................................................................................2 A @ 125 volts RMS-60 Hz or 2 A @ 28 VDC, 1 A @ 250 volts RMS-60 Hz
DPDT ..............................................................................................................................................................1 A @ 125 volts RMS-60 Hz or 1 A @ 28 VDC
Contact Resistance (0.1 VDC-10 mA)........................................................................................................................................................10 milliohms nominal
Contact Bounce ..................................................................................................................................................................................5 milliseconds maximum
Dielectric Withstanding Voltage (MIL-STD-202, Method 301)
Sea Level ................................................................................................................................................................................................1500 VAC minimum
Insulation Resistance ..........................................................................................................................................................................1000 megohms minimum
Environmental Characteristics1
Operating Temperature Range ............................................................................................................................................................................0 °C to +70 °C
Exposure Temperature Range ........................................................................................................................................................................-65 °C to +125 °C
Vibration (Dual Section)..........................................................................................................................................................................................................8 G
Contact Resistance ............................................................................................................................................................................10 milliohms maximum
Contact Bounce..............................................................................................................................................................................0.1 millisecond maximum
Shock (Dual Section)............................................................................................................................................................................................................20 G
Contact Resistance ............................................................................................................................................................................10 milliohms maximum
Contact Bounce..............................................................................................................................................................................0.1 millisecond maximum
Rotational Life........................................................................................................................................................................................................25,000 cycles
Switch Actuating Torque (50% Duty cycle @ Rated Power Load) ......................................................................................1.41 to 4.94 N-cm (2 to 7 oz.-in.)
Contact Resistance ..........................................................................................................................................................................100 milliohms maximum
Moisture Resistance (MIL-STD-202, Method 106, Condition B)
Contact Resistance (0.1 VDC-10 mA) ................................................................................................................................................10 milliohms maximum
Insulation Resistance (After 24 Hours @ Room Temperature) (500 VDC) ........................................................................................100 megohms minimum
Housing Material................................................................................................................................High temperature, flame retardant, thermosetting plastic
Mechanical Characteristics1
Actuating Torque (Each Section, Switch Module Only) ......................................................................................................3.53 to 10.59 N-cm (5 to 15 oz.-in.)
Running Torque (Out of Detent, 2-4 Module Assembly) ......................................................................................................0.21 to 1.41 N-cm (0.3 to 2 oz.-in.)
Detent ......................................................................................................................................................................................................CW or CCW standard
Actuation Angle..............................................................................................................................................................................................................20 ° ±5 °
Contact Materials ............................................................................................................................................................................Fine silver with gold overlay
Terminal Styles ....................................................................................................................................................................................................Solder lug only
Standard Orientation ..................................................................................................................................................................In-line with control terminals
Optional..............................................................................................................................................................................Rotated 90 ° CCW from standard
Terminal Strength (Before and After Soldering Heat Exposure) ............................................................................................................0.9 kg (2 lbs.) minimum
NOTE: Model 99 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.

No Preview Available !

91, 92, 93, 94, 95, 96, 97, 99 - 5/8 ” Square Single-Turn
Product Dimensions
Model 91 & 96 PC Pin Terminals, In-Line
22.86 ± .43
www.DataSheet4U.co(m.90 ± .017)
12.7
(.50)
.79 ± .41
(.031 ± .016)
15.88 ± .38
(.625 + .015)
9.53 ± .38 (STYLE A)
(.375 ± .015)
6.35 ± .38 (STYLE C)
(.250 ± .015)
1.37
(.054)
SEE DETAIL
FOR
SHAFT OPTIONS
2.36
(.093)
12 3
15.29 ± .56
(.602 ±.022)
(MODEL 91 ONLY)
13.72
(.54)
DIA.
15.88 ± .38
(.625 ± .015)
9.53 ± .38
(.375 ± .015)
10.16
(.40)
11.05 ± .20
(.435 ± .008)
2.54
(.100)
(.0.8312)DIA.
2.54
(.100)
Model 93 PC Pin Terminals, "L" Pattern
(.0.8312)DIA. TYP.
10.16 ± .30
(.40 ± .012)
11
2
3
5.97 ± .38
(.235 ± .015)
5.08 ± .38
(.20 ± .015)TYP.
11.05 ± .20
(.435 ± .008)
2
12.7 ± 1.02
(.50 ± .040)
5.08
(.20)
Model 92 J-Hooked
Terminals, In-Line
.79
(.031) 2 PLCS.
321
5.08
(.20)
.254
(.010)
GAP
1.52
(.06)
Model 94 J-Hooked
Terminals, "L" Pattern
321
1.52
(.06)
GAP
.81
(.032)
R. MAX.
5.33 ± .76
(.21 ± .03)
3.81
(.150)
MAX. TYP.
Bushing Styles
3/8 THREADLESS (9.53 mm) (STYLE "D")
3/8-32 UNEF (9.53 mm) (STYLE "A")
1/4-32 UNEF (6.35 mm) (STYLE "C")
M10 X 0.75-6g (STYLE "R")
M7 X 0.75-6g (STYLE "U")
Model 97 1st Cup Same As Model 93
(2nd Cup - Switch)
2.77 ± .38
(1.09 ± .015)
15.88
(.625)
REF.
31
MOUNTING
SURFACE
16.89 ± .51
(.665 ± .020)
(.20.9209)6 PLCS.
4 5 62
2.41
(.095
X
±
1.14
.045)
SLOT
6
PLCS
2.54
(.100
±
±
.00.1205) 2
PLCS.
2.77 ± .38
(.109 ± .015)
8.26 ± 0.25
(.325 ± .010)
Model 99 1st Cup Same As Model 95
(2nd Cup - Switch)
2.77 ± .38
(1.09 ± .015)
MOUNTING
SURFACE
24.77 ± .51
(.975 ± .020)
15.88
(.625)
REF.
31
5.59 ± .38
(.022 ± .015)
16.89 ± .51
(.665 ± .020) 1
23
2.41
(.095
X
±
.10.4154)4SL5OT6
6
2
PLCS
(.20.9209)6 PLCS.
Model 95 Solder Lug Terminals, "Triangular" Pattern
4.45 ± .38
(.175 ± .015)
10.16
(.40)
5.59 ± .20
(.220 ± .008)
4.45 ± .38
(.175 ± .015)
2.54
(.100)
5.08 ± 1.02
(.200 ± .040)
2.03 .41
(.080)
3 PLCS.
(.016)
2.54
(.100)
1.02
(.040)
WIDE
X
2.29
(.090)
LONG
3 PLCS.
4.45 ± .38
(.175 ± .015)
2.77 ± .38
(.109 ± .015)
Switch Module Variations
Shaft Flat Orientation
120 ° ± 5 ° STD.
FLAT ORIENTATION
(SHAFT AT CCW END)
13
CCW
2
POTENTIOMETER
TOTAL ROTATION 300 °
TOLERANCES EXCEPT AS SHOWN:
DECIMAL
.XXX
±
(...X10X2185±)(.F.03R08A5)CTAINOGNL±E
1/64
±5 °
DIMENSIONS ARE:
MM
(INCHES)
CCW DETENT
25 ° MAX.
ACTUATION
ANGLE
(TYPES 51,
53, 55, 57, 59,
61, 71, 73)
CW DETENT
25 ° MAX.
ACTUATION ANGLE
(TYPES 50, 52, 54,
56, 58, 60, 70, 72)
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
NOTE: Switch terminals shown in vertical position.
4
3
12
DPST (NO/NC)
(TYPES 50, 51, 56, 57)
4
3
2
1
DPST (NC/NC)
(TYPES 54, 55, 60, 61)
34
12
DPST (NO/NO)
(TYPES 52, 53, 58, 59)
4
35
6
1
DPDT (NC/NC)
2
(TYPES 70, 71, 72, 73)
Switch contacts shown in detent position.

No Preview Available !

91, 92, 93, 94, 95, 96, 97, 99 - 5/8 ” Square Single-Turn
Product Dimensions
Plastic SHAFT TYPE "B" (USES BUSHING A OR D)
Shaft
1.60+.38/-.00
Styles (.063+.015/-.000)
www.DataSheet4U.com
1.19
(.047)
6.32+.000/-.152
(.249+.000/.006)
DIA.
STD. LENGTHS:
12.70 15.88 19.05
(.500) (.625) (.750)
22.23
(.875)
SHAFT TYPE "D" (USES BUSHING C)
13.16+.00/-.15 DIA.
(.1245+.000/-.006)
STD. LENGTHS:
12.70 15.88 19.05
(.500) (.625) (.750)
SHAFT TYPE "T" (USES BUSHING U)
1.50 ± .25
(0.06 ± .001)
.79
(0.03)
STD. LENGTHS:
3.988 +0.000/-0.051
(.157 +.000/-.002)
DIA.
12.00 16.00 22.00
(.472) (.630) (.866)
SHAFT TYPE "C" (USES BUSHING A OR D)
11.18 ± .38
(.440 ± .015)
5.49
(.216)
STD. LENGTHS:
22.23
(.875)
6.30+.000/-.152
(.248+.000/.006)
DIA.
SHAFT TYPE "R" (USES BUSHING R)
1.80 ± .25
(0.07 ± .001)
5.994 +0.000/-0.051
(.236 +.000/-.002)
DIA.
1.00
(.04)
STD. LENGTHS:
16.0 19.0 22.0
(.630) (.748) (.866)
SHAFT TYPE "W" (USES BUSHING A OR D)
14.27 ± .25
(.562 ± .010)
48 TOOTH
STD. LENGTHS:
25.40
(1.00)
6.31+.025/-.051
(.2485+.001/.002)
DIA.
Metal
Shaft
Styles
SHAFT TYPE "A" (USES BUSHING A)
6.32+.010/-.025
(.2490+.0004/.0010)
DIA
12.70
(.500)
STD. LENGTHS:
15.88 19.05 22.23 25.4
(.625) (.750) (.875) (1.000)
SHAFT TYPE "H" (USES BUSHING A)
“F” ± .38
(“F” ± .015)
6.32+.010/-.025
(.2490+.0004/.0010)
DIA
5.486 ± .051
(.216 ± .002)
12.70
(.500)
STD. LENGTHS:
15.88 19.05 22.23 25.4
(.625) (.750) (.875) (1.000)
1.60
(.063)
FLAT LENGTH “F”:
4.78 7.95 11.13
(.188) (.313) (.438)
14.30
(.563)
SHAFT TYPE "V" (USES BUSHING U)
1.50 ± 0.25
(.059 ± .010)
0.79 ± 0.13
(.031 ± .054)
3.99+.000/-.035
(.1571+.0000/.0010)
DIA
12.0
(.472)
STD. LENGTHS:
16.0 19.0
(.630) (.748)
22.0
(.866)
SHAFT TYPE "G" (USES BUSHING A)
1.60+.38/-.00
(.063+.015/-.000)
6.32+.010/-.025
(.2490+.0004/.0010)
DIA.
1.194
(.047)
12.70
(.500)
STD. LENGTHS:
15.88 19.05 22.23 25.4
(.625) (.750) (.875) (1.000)
DIMENSIONS ARE:
MM
(INCHES)
SHAFT TYPE "J" (USES BUSHING R)
1.80 ± 0.25
(.071 ± .010)
6.00+.000/-.035
(.2362+.0000/.0010)
DIA
1.00 ± 0.13
(.039 ± .054)
STD. LENGTHS:
12.0 16.0 19.0
(.472) (.630) (.748)
22.0
(.866)
SHAFT TYPE "Y" (USES BUSHING A)
9.12
(.359)
1.27
(.050)
21 °
.762
(.030) 5.97
(.235)
DIA.
5.87
(.231)
8.74
(.344)
5.03 ± .05
(.198 ± .002)
1.57 DIA.
(.062)
TOLERANCES EXCEPT AS SHOWN: .XX = ± .02
(.050)
.XXX
=
±
.005
(.127)
STD. LENGTHS:
19.05
(.750)
.XXXX = ± .0005
(.0127)
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.