L150X1M-1.pdf 데이터시트 (총 30 페이지) - 파일 다운로드 L150X1M-1 데이타시트 다운로드

No Preview Available !

www.DataSheet4U.com
15.0” XGA Color TFT-LCD Module
Model Name: L150X1M-1
( ) Preliminary Specifications
(u) Final Specifications
(C) Copyright Acer Display Technology, Inc.
Nov, 2000 All Rights Reserved.
No Reproduction and Redistribution Allowed.
L150X1M-1 Ver0.6
1/25

No Preview Available !

i Contents
1.0 Handling Precautions
2.0 General Description
2.1 Display Characteristics
2.2 Functional Block Diagram
2.3 Optical Characteristics
www.DataSheet4U.2co.4mPixel format image
3.0 Electrical characteristics
3.1 Absolute Maximum Ratings
3.2 Module Interface Connectors
3.2.1 Connector Type
3.2.2 Pin Configuration
3.3 Backlight Connector
3.3.1 Connector Type
3.3.2 Pin Configuration
3.4 Signal Electrical Characteristics
3.5 Interface Timing
3.5.1 Timing Characteristic
3.5.2 Timing Definition
3.6 Power Consumption
3.7 Power ON/OFF Sequence
4.0 Backlight Characteristics
4.1 Signal for Lamp connector
4.2 Parameter guideline for CCFL Inverter
5.0 Label, Vibration, Shock, and Drop
5.1 Label
5.2 Vibration and shock
5.3 Drop test
6.0 Environment
6.1 Temperature and humidity
6.1.1 Operating conditions
6.1.2 Shipping conditions
6.2 Atmospheric pressure
6.3 Thermal shock
7.0 Reliability
7.1 Failure criteria
7.2 Failure rate
7.2.1 Usage
7.2.2 Components de-rating
7.3 CCFL life
7.4 ON/OFF cycle
8.0 Safety
(C) Copyright Acer Display Technology, Inc.
Nov, 2000 All Rights Reserved.
No Reproduction and Redistribution Allowed.
L150X1M-1 Ver0.6
2/25

No Preview Available !

8.1 Sharp edge requirement
8.2 Material
8.2.1 Toxicity
8.2.2 Flammability
8.3 Capacitors
8.4 Hazardous voltage
9.0 Other requirements
9.1 Smoke free design
9.2 National test lab requirement
10.0 Mechanical Characteristics
www.DataSheet4U.com
ii Record of Revision
Version and Date
0.1 2000/07/28
0.2 2000/08/15
0.3 2000/08/31
0.4 2000/10/23
0.5 2000/11/16
Page
All
5
5
5
6
10
19
22,23
5
8
22,23
5,8
8
Old description
New Description
Remark
First Edition for Customer
All
Brightness variation 15%(max.) Brightness uniformity 85%(typ.) Change
Luminance uniformity 1.25(max.) Luminance uniformity (TCO99) 1.7 Change
(max.)
Color Gamut 62% typ., 60% min Color Gamut 62% (typ.)
of NTSC coverage
Change
Note 2: Brightness variation …
Note 2: Brightness uniformity of Change
these 9 points is defined as flollow:
(Min. brightness / Max.
brightness ) x 100%
Storage humidity max. 100% Storage humidity max. 95%
Change
7.4 on/off cycle value 24,000 7.4 on/off cycle value 36,000
Change
Mechanical characteristics update Change
Viewing angle 60(up),40(down) Viewing angle
Change
40(up),60(down)
Viewing angle (Upper) 60,
(Lower) 40
Viewing angle (Upper) 40, (Lower) Change
60
Mechanical characteristics update Change
Brightness Uniformity : 85%(typ) Brightness Uniformity : 80%(typ) / Change
/ 80%(min)
75%(min)
Viewing Angle (min) :
Change
50/50/30/50(L/R/U/D)
Color / Chromaticity :
Wx = 0.313 0.03
Wy = 0.329 0.03
Rx = 0.633 0.03
Ry = 0.336 0.03
Gx = 0.294 0.03
Gy = 0.604 0.03
(C) Copyright Acer Display Technology, Inc.
Nov, 2000 All Rights Reserved.
No Reproduction and Redistribution Allowed.
L150X1M-1 Ver0.6
3/25

No Preview Available !

0.6 2000/11/28 6,8
www.DataSheet4U.com
15
23,24
16
Bx = 0.145 0.03
By = 0.097 0.03
CCFL frequency : 50kHz (typ)
Contrast Ratio : 300(min),
400( typ)
Change
Response Time :
Ton (max) : 22ms
Toff(max) : 48ms
Ton+Toff(max) : 70ms
LCD Drive current:600mA(typ) Change
LCD Drive Power consumption :
2W (typ)
Adding one boss to the back
plate
Change
CCFL Power Consumption :
16W
Change
(C) Copyright Acer Display Technology, Inc.
Nov, 2000 All Rights Reserved.
No Reproduction and Redistribution Allowed.
L150X1M-1 Ver0.6
4/25

No Preview Available !

1.0 Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth when handling.
www.DataSheet4U.com
7) Do not open nor modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the Interface
Connector of the TFT-LCD module.
10) After installation of the TFT-LCD module into an enclosure (LCD monitor housing, for example), do not twist
nor bend the TFT-LCD Module even momentary. At designing the enclosure, it should be taken into
consideration that no bending/twisting forces are applied to the TFT-LCD module from outside. Otherwise the
TFT-LCD module may be damaged.
(C) Copyright Acer Display Technology, Inc.
Nov, 2000 All Rights Reserved.
No Reproduction and Redistribution Allowed.
L150X1M-1 Ver0.6
5/25