A018AN02.pdf 데이터시트 (총 28 페이지) - 파일 다운로드 A018AN02 데이타시트 다운로드

No Preview Available !

www.datasheet4u.com
Spec. No.
413 - 212 - 105
Doc. version : 3
Total pages : 26
Date
: 200 1.10.15
Product Specification
1.8? COLOR TFT-LCD MODULE
MODEL NAME: A018AN02 Ver.1 ( UP018D02 -1 )
Final Specification
Note: The content of this
specification is subject to
change.
© 2001 AU Optronics
All Rights Reserved,
Do Not Copy.

No Preview Available !

Version Revise Date
www.datas1heet4u.com30/Jul/2001
2 30/Sep/2001
3 15/Oct./2001
4 06/Feb./2002
Record of Revision
Page
Content
First draft.
6 Power supply Vcc 4.8 V chang to 3 V
7 Add Note 7: After 2 hours Operating Vcdc drift under +80 mV,
Non-operating Vcdc drift under +80 mV
9 Change Color Chromaticity
Before change
Min. Typ. Max
After change
Min. Typ. Max
Rx 0.55 0.58 0.61
Ry 0.29 0.32 0.35
Gx 0.27 0.30 0.33
Rx 0.54 0.57 0.60
Ry 0.27 0.30 0.33.
Gx 0.26 0.29 0.32
Gy 0.56 0.59 0.62
Gy 0.54 0.57 0.60
Bx 0.12 0.15 0.18
By 0.12 0.15 0.18
Bx 0.12 0.15 0.18
By 0.10 0.13 0.16
15 Add Note4 : Panel position definition y0-y1<=+0.2mm
7 Change from Note 7: After 2 hours Operating Vcdc drift under
+80 mV, Non-operating Vcdc drift under +80 mV
To Note 7: After 2 hours Operating Vcdc drift under +50 mV,
Non-operating Vcdc drift under +50 mV
6 Change
7 VGH 14.3 min. 15.7 max. VGL-H 10.5 min. 9.5 max.
VGL_AC 5.6 typ. VCAC 5.6 typ.
To
VGH 13.5 min. 16.5 max. VGL-H 11 min. 9 max.
VGL_AC 5 typ. VCAC 5 typ.

No Preview Available !

Spec.No
Version
Page
: 413-212-105
:3
: 1 /26
Contents:
www.datasheet4u.com
A. Physical specification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P3
B. Electrical specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P4
1. Pin assignment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P 4
a.TFT-LCD panel driving section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P 5
b.Backlight driving section. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P 6
2.Absolute maximum ratings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P 6
3. Electrical characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P 6
a. Typical operating conditions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P 6
b. Current consumption. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P 7
c. Backlight driving conditions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P7
4. AC Timing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P 8
a. Timing conditions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P 8
b. Timing diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P 8
C. Optical specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P9
D. Reliability test terms. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P12
E. Packing for m. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P14
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.