B1094.pdf 데이터시트 (총 4 페이지) - 파일 다운로드 B1094 데이타시트 다운로드

No Preview Available !

www.DataSheet4U.com
DATA SHEET
SILICON POWER TRANSISTOR
2SB1094
PNP SILICON EPITAXIAL TRANSISTOR
FOR LOW-FREQUENCY POWER AMPLIFIER
FEATURES
• The 2SB1094 features ratings covering a wide range of
applications and is ideal for power supplies or a variety of drives
in audio and other equipment.:
VCEO ≥ −60 V, VEBO ≥ −7.0 V, IC(DC) ≤ −3.0 A
• Mold package that does not require an insulating board or
insulation bushing
• Complementary transistor with 2SD1585
QUALITY GRADES
• Standard
Please refer to “Quality Grades on NEC Semiconductor Devices”
(Document No. C11531E) published by NEC Corporation to know
the specification of quality grade on the devices and its
recommended applications.
ABSOLUTE MAXIMUM RATINGS (Ta = 25°C)
Parameter
Symbol
Collector to base voltage
VCBO
Collector to emitter voltage
VCEO
Emitter to base voltage
VEBO
Collector current (DC)
IC(DC)
Collector current (pulse)
IC(pulse)*
Base current (DC)
IB(DC)
Total power dissipation
PT (Tc = 25°C)
Total power dissipation
PT (Ta = 25°C)
Junction temperature
Tj
Storage temperature
Tstg
* PW 10 ms, duty cycle 50%
Ratings
60
60
7.0
3.0
5.0
0.6
15
2.0
150
55 to +150
Unit
V
V
V
A
A
A
W
W
°C
°C
PACKAGE DRAWING (UNIT: mm)
Electrode Connection
1. Base
2. Collector
3. Emitter
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.
Document No. D16186EJ2V0DS00 (2nd edition)
Date Published April 2002 N CP(K)
Printed in Japan
©
21090928

No Preview Available !

www.DaEtaLSEheCeTt4RU.IcCoAmL CHARACTERISTICS (Ta = 25°C)
Parameter
Symbol
Conditions
Collector cutoff current
ICBO VCB = 60 V, IE = 0
Emitter cutoff current
IEBO VEB = 7.0 V, IC = 0
DC current gain
hFE1** VCE = 5.0 V, IC = 50 mA
DC current gain
hFE2** VCE = 5.0 V, IC = 0.5 A
Collector saturation voltage VCE(sat)** IC = 2.0 A, IB = 0.2 A
Base saturation voltage
VBE(sat)** IC = 2.0 A, IB = 0.2 A
Collector capacitance
Cob VCB = 10 V, IE = 0, f = 1.0 MHz
Gain bandwidth product
fT VCE = 5.0 V, IC = 0.1 A
** Pulse test PW 350 µs, duty cycle 2%
hFE CLASSIFICATION
Marking
hFE2
M
40 to 80
L
60 to 120
K
100 to 200
TYPICAL CHARACTERISTICS (Ta = 25°C)
2-mm thick
aluminum
silicon grease
co ting
2SB1094
MIN.
20
40
TYP.
100
0.5
1.1
70
20
MAX.
10
10
200
1.5
2.0
Unit
µA
µA
V
V
pF
MHz
With infinite heatsink (Tc = 25°C)
Without heatsink
Ambient Temperature Ta (°C)
Case Temperature TC (°C)
Tc = 25°C
(with infinite heatsink )
Collector to Emitter Voltage VCE (V)
Pulse Width PW (s)
2 Data Sheet D16186EJ2V0DS

No Preview Available !

www.DataSheet4U.com
2SB1094
Collector to Emitter Voltage VCE (V)
Collector Current IC (A)
Collector Current IC (A)
Collector Current IC (A)
Collector to Base Voltage VCB (V)
Data Sheet D16186EJ2V0DS
3

No Preview Available !

www.DataSheet4U.com
2SB1094
The information in this document is current as of July, 2001. The information is subject to change
without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data
books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products
and/or types are available in every country. Please check with an NEC sales representative for
availability and additional information.
No part of this document may be copied or reproduced in any form or by any means without prior
written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document.
NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of
third parties by or arising from the use of NEC semiconductor products listed in this document or any other
liability arising from the use of such products. No license, express, implied or otherwise, is granted under any
patents, copyrights or other intellectual property rights of NEC or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of customer's equipment shall be done under the full
responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third
parties arising from the use of these circuits, software and information.
While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers
agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize
risks of damage to property or injury (including death) to persons arising from defects in NEC
semiconductor products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment, and anti-failure features.
NEC semiconductor products are classified into the following three quality grades:
"Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products
developed based on a customer-designated "quality assurance program" for a specific application. The
recommended applications of a semiconductor product depend on its quality grade, as indicated below.
Customers must check the quality grade of each semiconductor product before using it in a particular
application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support)
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's
data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not
intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness
to support a given application.
(Note)
(1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries.
(2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for
NEC (as defined above).
M8E 00. 4