80C517A.pdf 데이터시트 (총 30 페이지) - 파일 다운로드 80C517A 데이타시트 다운로드

No Preview Available !

Microcomputer Components
8-Bit CMOS Single-Chip Microcontroller
SAB 80C517A/83C517A-5
www.DataSheet4U.com
Data Sheet 05.94

No Preview Available !

High-Performance
8-Bit CMOS Single-Chip Microcontroller
SAB 80C517A/83C517A-5
Preliminary
SAB 83C517A-5
SAB 80C517A
Microcontroller with factory mask-programmable ROM
Microcontroller for external ROM
l SAB 80C517A/83C517A-5,
up to 18 MHz operation
l 32 K × 8 ROM (SAB 83C517A-5 only,
ROM-Protection available)
l 256 × 8 on-chip RAM
l 2 K × 8 on-chip RAM (XRAM)
l Superset of SAB 80C51 architecture:
– 1 µs instruction cycle time at 12 MHz
– 666 ns instruction cycle time at 18 MHz
– 256 directly addressable bits
– Boolean processor
– 64 Kbyte external data and
program memory addressing
l Four 16-bit timer/counters
l Powerful 16-bit compare/capture unit
(CCU) with up to 21 high-speed or PWM
output channels and 5 capture inputs
l Versatile "fail-safe" provisions
www.DaltaSFheaest4tU3.c2om-bit division, 16-bit multiplication,
32-bit normalize and shift by peripheral
MUL/DIV unit (MDU)
l Eight data pointers for external memory
addressing
l Seventeen interrupt vectors, four priority
levels selectable
l Genuine 10-bit A/D converter with
12 multiplexed inputs
l Two full duplex serial interfaces with
programmable Baudrate-Generators
l Fully upward compatible with SAB 80C515,
SAB 80C517, SAB 80C515A
l Extended power saving mode
l Fast Power-On Reset
l Nine ports: 56 I/O lines, 12 input lines
l Three temperature ranges available:
0 to 70 oC (T1)
– 40 to 85oC (T3)
– 40 to 110oC (T4)
l Plastic packages: P-LCC-84,
P-MQFP-100-2
The SAB 80C517A/83C517A-5 is a high-end member of the Siemens SAB 8051 family of
microcontrollers. It is designed in Siemens ACMOS technology and based on SAB 8051
architecture. ACMOS is a technology which combines high-speed and density characteristics
with low-power consumption or dissipation.
While maintaining all the SAB 80C517 features and operating characteristics the
SAB 80C517A is expanded in its "fail-safe" characteristics and timer capabilities.The
SAB 80C517A is identical with the SAB 83C517A-5 except that it lacks the on-chip program
memory. The SAB 80C517A/83C517A-5 is supplied in a 84-pin plastic leaded chip carrier
package (P-LCC-84) and in a 100-pin plastic quad flat package (P-MQFP-100-2).
Semiconductor Group
1
1994-05-01

No Preview Available !

SAB 80C517A/83C517A-5
SAB 80C517A/83C517A-5
Revision History
05.94
Previous Releases
01.94/08.93/11.92/10.91/04.91
Page
Subjects (changes since last revision 04.91)
6
4
7-15
several
3
26, 27, 31
34
41
49
60
62
65
several
66
66
Page
– Pin configuration P-MQFP-100-2 added
– Pin differences updated
– Pin numbers for P-MQFP-100-2 package added
– Correction of P-MRFP-100 into P-MQFP-100-2
– Ordering information for -40 to +110°C versions
– Correction of register names S0RELL, SCON, ADCON, ICRON,
and SBUF
– Figure 4 corrected
– Figure 8 corrected
– PE/SWD function description completed
– Correct ordering numbers
– Test condition for VOH, VOH1 corrected
tPXIZ name corrected
tAVIV, tAZPL values corrected
– Minimum clock frequence is now 3.5 MHz
tQVWH (data setup before WR) corrected and added
tLLAX2 corrected
Subjects (changes since last revision 08.93)
26
51
www.DataSheet4U.com
65
65
74
– Corrected SFR name S0RELL
– Below "Termination of HWPD Mode": 4th paragraph with ident
corrected
– Description of tLLIV corrected
– Program Memory Read Cycle: tPXAV added
– Oscillator circuit drawings: MQFP-100-2 pin numbers added.
Page
Subjects (changes since last revision 01.94)
– Minor changes on several pages
47 – Table 6 corrected
Semiconductor Group
2
1994-05-01