AXK5F.pdf 데이터시트 (총 8 페이지) - 파일 다운로드 AXK5F 데이타시트 다운로드

No Preview Available !

NARROW-PITCH
CONNECTORS FOR
BOARD-TO-BOARD
CONNECTION
AXK(5/6)F
NARROW PITCHwww.DataSheet4U.com
(0.5mm) CONNECTORS
P5 SERIES — P5KF —
3) Use of Ni barrier construction is
standard. Highly effective against solder
creeping. (Available from Oct. 2005)
G What is Ni barrier construction?
By providing an exposed nickel part on the
gold (Au) plated contact, solder creeping is
prevented despite the ultra low profile.
[Contact]
Socket side contact
Ni barrier
Cu Ni Au
Socket
Header
FEATURES
1. The connector is a two-piece
structure and 0.5mm pitch.
The product lineup consists of the mated
height of 1.5mm, 2.0mm and 2.5mm.
2. Strong resistance to adverse
environments! Utilizes
construction
for high contact reliability.
1) The socket and header has the same
dropping shock and torsion resistant
construction as the bellows-type contact.
Since the contact is formed
by bending thin plate, it
has a spring-like quality.
This construction helps
make it resistant to
dropping and twisting.
2) V notch construction used for excellent
resistance against foreign matters.
G What is V notch construction?
By using the edge for the contacting part
and increasing contact pressure per unit
area, the effectiveness in removing flux
and contaminants is increased compared
to its predecessor. This is also effective in
preventing the trapping of contaminants.
[Cross section of contacting part]
Without notch
With V notch
Socket side contact cross section
Header side contact
Exposed
Ni part
Cross section of
socket side contact
4) Porosity treatment applied for
improved resistance against corrosion.
What is porosity treatment?
This treatment consists of coating the
surface with a very thin film to seal pinholes
in the gold plating. This porosity treatment
technology ensures the same contact
reliability for thin gold plating as that of thick
gold plating.
Porosity treatment film
Au plating
Pinholes
Surrounding gas
Ni plating
Base material
G Improvement in insertion/removal durability
G Improvement in resistance to corrosion
G Improvement in contact reliability for digital signals
3. Simple locking structure
Superior mating operation with click
feel to indicate that mating is
complete.
Simple lock mechanism
Header side contact cross section
4. Mating length 0.55mm
While achieving a low profile of 1.5mm
between PCBs, the effective mating
length has been extended to ensure that
there is some latitude in the mating.
0.55mm
5.The lower connector bottom surface
construction prevents contact and
shorts between the PCB and metal
terminals.
This enables freedom in pattern
wiring, helping to make PCB’s smaller.
<Socket>
<Header>
Connector bottom: Create any thru-hole and pattern wiring.
6. Automatic mounting inspection is
facilitated by the gull-wing terminal
shape which makes mounting
verification easy.
7. Compliance with RoHS’ Directive
Environmentally friendly, the connectors’
comply with Europe’s RoHS’ Directive.
Cadmium, lead, mercury, hexavalent,
chromium, PBB and PBDE are not used.
8. Connectors for inspection available
Connectors for inspection are available
that are ideal for modular unit inspection
and inspection in device assembly
processes.
APPLICATIONS
• Cellular phones
• PHS
• Portable data terminals
• Digital cameras
• Compact portable devices
Ideal for Board-to-FPC connections
Before
mating
After
mating
FPC
Narrow-pitch
connectors
P5KF
Reinforcing plate
PCB
1.5mm
The simple lock
mechanism ensures
that the connector
clicks into position
when it is inserted for
reliable single-action
insertion on the PCB.
This enables the number of pins to
be doubled white the size remains
the same as that for existing FPC
connectors. This, in turn, contributes
to making products and equipment
more compact.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
11/2005

No Preview Available !

AXK(5/6)F
TABLE OF PRODUCT TYPES
www.DataSheet4U.com
Socket
Header
Product name
P5KF
Mated
height
1.5mm 2.0mm 2.5mm
10 ✩ ✩ ✩
12 ✩ ✩ ✩
14 ✩ ✩ ✩
16 ✩ ✩ ✩
18 ✩ ✩ ✩
20 ✩ ✩ ✩
22 ✩ ✩ ✩
24 ✩ ✩ ✩
26
30 ✩ ✩ ✩
32
34 ✩ ✩ ✩
36
40 ✩ ✩ ✩
44
50 ✩ ✩ ✩
60 ✩ ✩ ✩
70 ✩ ✩ ✩
80 ✩ ✩ ✩
100 ✩ ✩
Notes: 1. The standard type comes without positioning bosses.
Connectors with positioning boss are available for on-demand production.
2. Please consult us for products which have no mark.
ORDERING INFORMATION
AXK
5F: Narrow Pitch Connector P5KF (0.5 mm pitch) Socket
6F: Narrow Pitch Connector P5KF (0.5 mm pitch) Header
Number of contacts (2 digits)
Mated height
<Socket>
3: For mated height 1.5 mm
5: For mated height 2.0 mm and 2.5 mm
<Header>
3: For mated height 1.5 mm and 2.0 mm
5: For mated height 2.5 mm
Functions
3: With positioning bosses
4: Without positioning bosses
Surface treatment (Contact portion / Terminal portion)
<Socket>
5: Ni plating on base, Au plating on surface/Ni plating on base, Au plating on surface
7: Ni plating on base, Au plating on surface/Ni plating on base, Au plating on surface
(for Ni barrier product available from Oct. 2005)
Contact portion
<Socket>
Y: V notch type product (chamfered on both sides)
<Header>
Y: V notch type product
Packing
G: 2,000 pieces embossed tape and plastic reel × 2 (from Oct. 2005)
J: 2,000 pieces embossed tape and paper reel × 2
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
11/2005

No Preview Available !

AXK(5/6)F
PRODUCT TYPES
www.DataSheet4U.com
Part No.
Packing
Mated
height
No. of
contacts
Ni barrier product:
Not available
(Paper reel)
Socket
(Plastic reel)
(Recommendation)
Ni barrier product:
Not available
(Paper reel)
Header
(Plastic reel)
(Recommendation)
Inner carton
(1-reel)
Outer carton
10 AXK5F10345YJ AXK5F10347YG (From Oct. 2005) AXK6F10345YJ AXK6F10347YG (From Oct. 2005)
12 AXK5F12345YJ AXK5F12347YG (From Oct. 2005) AXK6F12345YJ AXK6F12347YG (From Oct. 2005)
14 AXK5F14345YJ AXK5F14347YG (From Oct. 2005) AXK6F14345YJ AXK6F14347YG (From Oct. 2005)
16 AXK5F16345YJ AXK5F16347YG (From Oct. 2005) AXK6F16345YJ AXK6F16347YG (From Oct. 2005)
18 AXK5F18345YJ AXK5F18347YG (From Oct. 2005) AXK6F18345YJ AXK6F18347YG (From Oct. 2005)
20 AXK5F20345YJ AXK5F20347YG (From Oct. 2005) AXK6F20345YJ AXK6F20347YG (From Oct. 2005)
22 AXK5F22345YJ AXK5F22347YG (From Oct. 2005) AXK6F22345YJ AXK6F22347YG (From Oct. 2005)
24 AXK5F24345YJ AXK5F24347YG (From Oct. 2005) AXK6F24345YJ AXK6F24347YG (From Oct. 2005)
1.5 mm 26 AXK5F26345YJ AXK5F26347YG (From Oct. 2005) AXK6F26345YJ AXK6F26347YG (From Oct. 2005) 2,000 pieces 4,000 pieces
30 AXK5F30345YJ AXK5F30347YG (From Oct. 2005) AXK6F30345YJ AXK6F30347YG (From Oct. 2005)
32 AXK5F32345YJ AXK5F32347YG (From Oct. 2005) AXK6F32345YJ AXK6F32347YG (From Oct. 2005)
34 AXK5F34345YJ AXK5F34347YG (From Oct. 2005) AXK6F34345YJ AXK6F34347YG (From Oct. 2005)
40 AXK5F40345YJ AXK5F40347YG (From Oct. 2005) AXK6F40345YJ AXK6F40347YG (From Oct. 2005)
50 AXK5F50345YJ AXK5F50347YG (From Oct. 2005) AXK6F50345YJ AXK6F50347YG (From Oct. 2005)
60 AXK5F60345YJ AXK5F60347YG (From Oct. 2005) AXK6F60345YJ AXK6F60347YG (From Oct. 2005)
70 AXK5F70345YJ AXK5F70347YG (From Oct. 2005) AXK6F70345YJ AXK6F70347YG (From Oct. 2005)
80 AXK5F80345YJ AXK5F80347YG (From Oct. 2005) AXK6F80345YJ AXK6F80347YG (From Oct. 2005)
10 AXK5F10545YJ AXK5F10547YG (From Oct. 2005) AXK6F10345YJ AXK6F10347YG (From Oct. 2005)
12 AXK5F12545YJ AXK5F12547YG (From Oct. 2005) AXK6F12345YJ AXK6F12347YG (From Oct. 2005)
14 AXK5F14545YJ AXK5F14547YG (From Oct. 2005) AXK6F14345YJ AXK6F14347YG (From Oct. 2005)
16 AXK5F16545YJ AXK5F16547YG (From Oct. 2005) AXK6F16345YJ AXK6F16347YG (From Oct. 2005)
18 AXK5F18545YJ AXK5F18547YG (From Oct. 2005) AXK6F18345YJ AXK6F18347YG (From Oct. 2005)
20 AXK5F20545YJ AXK5F20547YG (From Oct. 2005) AXK6F20345YJ AXK6F20347YG (From Oct. 2005)
22 AXK5F22545YJ AXK5F22547YG (From Oct. 2005) AXK6F22345YJ AXK6F22347YG (From Oct. 2005)
24 AXK5F24545YJ AXK5F24547YG (From Oct. 2005) AXK6F24345YJ AXK6F24347YG (From Oct. 2005)
2.0 mm 26 AXK5F26545YJ AXK5F26547YG (From Oct. 2005) AXK6F26345YJ AXK6F26347YG (From Oct. 2005)
30 AXK5F30545YJ AXK5F30547YG (From Oct. 2005) AXK6F30345YJ AXK6F30347YG (From Oct. 2005)
34 AXK5F34545YJ AXK5F34547YG (From Oct. 2005) AXK6F34345YJ AXK6F34347YG (From Oct. 2005)
40 AXK5F40545YJ AXK5F40547YG (From Oct. 2005) AXK6F40345YJ AXK6F40347YG (From Oct. 2005)
50 AXK5F50545YJ AXK5F50547YG (From Oct. 2005) AXK6F50345YJ AXK6F50347YG (From Oct. 2005)
60 AXK5F60545YJ AXK5F60547YG (From Oct. 2005) AXK6F60345YJ AXK6F60347YG (From Oct. 2005)
70 AXK5F70545YJ AXK5F70547YG (From Oct. 2005) AXK6F70345YJ AXK6F70347YG (From Oct. 2005)
80 AXK5F80545YJ AXK5F80547YG (From Oct. 2005) AXK6F80345YJ AXK6F80347YG (From Oct. 2005)
100 AXK5F00545YJ AXK5F00547YG (From Oct. 2005) AXK6F00345YJ AXK6F00347YG (From Oct. 2005)
2,000 pieces 4,000 pieces
10 AXK5F10545YJ AXK5F10547YG (From Oct. 2005) AXK6F10545YJ AXK6F10547YG (From Oct. 2005)
12 AXK5F12545YJ AXK5F12547YG (From Oct. 2005) AXK6F12545YJ AXK6F12547YG (From Oct. 2005)
14 AXK5F14545YJ AXK5F14547YG (From Oct. 2005) AXK6F14545YJ AXK6F14547YG (From Oct. 2005)
16 AXK5F16545YJ AXK5F16547YG (From Oct. 2005) AXK6F16545YJ AXK6F16547YG (From Oct. 2005)
20 AXK5F20545YJ AXK5F20547YG (From Oct. 2005) AXK6F20545YJ AXK6F20547YG (From Oct. 2005)
22 AXK5F22545YJ AXK5F22547YG (From Oct. 2005) AXK6F22545YJ AXK6F22547YG (From Oct. 2005)
24 AXK5F24545YJ AXK5F24547YG (From Oct. 2005) AXK6F24545YJ AXK6F24547YG (From Oct. 2005)
30 AXK5F30545YJ AXK5F30547YG (From Oct. 2005) AXK6F30545YJ AXK6F30547YG (From Oct. 2005)
2.5 mm 34 AXK5F34545YJ AXK5F34547YG (From Oct. 2005) AXK6F34545YJ AXK6F34547YG (From Oct. 2005)
36 AXK5F36545YJ AXK5F36547YG (From Oct. 2005) AXK6F36545YJ AXK6F36547YG (From Oct. 2005)
40 AXK5F40545YJ AXK5F40547YG (From Oct. 2005) AXK6F40545YJ AXK6F40547YG (From Oct. 2005)
44 AXK5F44545YJ AXK5F44547YG (From Oct. 2005) AXK6F44545YJ AXK6F44547YG (From Oct. 2005)
50 AXK5F50545YJ AXK5F50547YG (From Oct. 2005) AXK6F50545YJ AXK6F50547YG (From Oct. 2005)
60 AXK5F60545YJ AXK5F60547YG (From Oct. 2005) AXK6F60545YJ AXK6F60547YG (From Oct. 2005)
70 AXK5F70545YJ AXK5F70547YG (From Oct. 2005) AXK6F70545YJ AXK6F70547YG (From Oct. 2005)
80 AXK5F80545YJ AXK5F80547YG (From Oct. 2005) AXK6F80545YJ AXK6F80547YG (From Oct. 2005)
100 AXK5F00545YJ AXK5F00547YG (From Oct. 2005) AXK6F00545YJ AXK6F00547YG (From Oct. 2005)
Notes: 1. Regarding ordering units, During production: Please make orders in 1-reel units.
Samples for mounting confirmation: Available in units of 50 pieces. Please consult us. (See “Regarding sample orders to confirm proper mounting” on page 13.)
Samples: Small lot orders are possible. Please consult us.
2. The standard type comes without positioning bosses. Connectors with positioning bosses are available for on-demand production. For this type of connector, 9th
digit of the part no. changes from 4 to 3. e.g.
Mated height 1.5mm, 10 contacts for sockets: AXK5F10337YG
3. The 11th digit “Y” in the socket/header part number indicates the connector has a V notch. (For details, please consult one of our sales offices.)
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
11/2005

No Preview Available !

AXK(5/6)F
SPECIFICATIONS
1. Characteristics
Item
Rated current
Rated voltage
Electrical
characteristics
Breakdown voltage
Insulation resistance
Contact resistance
Composite insertion force
Mechanical
characteristics
Composite removal force
Post holding force
Ambient temperature
Soldering heat resistance
Thermal shock resistance
Environmental (header and socket mated)
characteristics
Humidity resistance
(header and socket mated)
Saltwater spray resistance
(header and socket mated)
H2S resistance
(header and socket mated)
Lifetime
characteristics
Insertion and removal life
Unit weight
Specifications
0.5A/contact (Max. 10 A at total contacts)
60V AC/DC
150V AC for 1 minute
Min. 1,000M(initial)
Max. 90m
Max. 0.981N {100gf}/contacts × contacts (initial)
Min. 0.0588N {6gf}/contacts × contacts
Min. 0.981N {100gf}/contact
–55°C to +85°C
Max. peak temperature of 245°C
300°C within 5 seconds
5 cycles, insulation resistance min. 100M,
contact resistance max. 90m
120 hours, insulation resistance min. 100M,
contact resistance max. 90m
24 hours, insulation resistance min. 100M,
contact resistance max. 90m
48 hours, contact resistance max. 90m
50 times
Mated height 1.5mm, 20 contacts; Socket: 0.06g
Header: 0.04g
www.DataSheet4U.com
Conditions
Detection current: 1mA
Using 500V DC megger
Measured based on the HP4338B measurement method of JIS C 5402
Measures the maximum load in the post axial direction until removal
No freezing at low temperatures
Infrared reflow soldering
Soldering iron
Sequence
1.
–55
0
–3
°C,
30
minutes
2. ~ , Max. 5 minutes
3.
85
+3
0
°C,
30
minutes
4. ~ , Max. 5 minutes
Bath temperature 40±2°C, humidity 90 to 95% R.H.
Bath temperature 35±2°C, saltwarter concentration 5±1%
Bath temperature 40±2°C, gas concentration 3±1 ppm,
humidity 75 to 80% R.H.
Repeated insertion and removal speed of max. 200 times/hours
2. Material and surface treatment
Part name
Material
Molded portion
Heat-resistant resin (UL94V-0)
Contact/Post
Copper alloy
Surface treatment
Contact portion: Ni plating on base, Au plating on surface
Terminal portion: Ni plating on base, Au plating on surface (Except for thick of terminal)
However, the area adjacent to the terminal on Ni barrier models is
exposed to Ni on base.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
11/2005

No Preview Available !

DIMENSIONS
• Socket (Mated height: 1.5mm, 2.0mm, 2.5mm)
AXK(5/6)F
www.DamtamShGeeente4rUal.ctoolemrance: ±0.2
Dimension table (mm)
No. of
contacts
A
B
10 5.50 2.00
12 6.00 2.50
14 6.50 3.00
16 7.00 3.50
18 7.50 4.00
20 8.00 4.50
22 8.50 5.00
24 9.00 5.50
26 9.50 6.00
30 10.50 7.00
32 11.00 7.50
34 11.50 8.00
36 12.00 8.50
40 13.00 9.50
44 14.00 10.50
50 15.50 12.00
60 18.00 14.50
70 20.50 17.00
80 23.00 19.50
100 28.00 24.50
0.50±0.05
• Header (Mated height: 1.5mm, 2.0mm, 2.5mm)
A
B±0.1
0.50±0.05
0.20±0.03
0.10
C
(0.80)
1.70
(Suction face)
4.80
4.20 5.80
0.12±0.03
(0.80)
Mated height
1.5 mm
2.0 mm, 2.5 mm
C
1.35
1.85
Dimension table (mm)
No. of
contacts
A
B
10 5.50 2.00
12 6.00 2.50
14 6.50 3.00
16 7.00 3.50
18 7.50 4.00
20 8.00 4.50
22 8.50 5.00
24 9.00 5.50
26 9.50 6.00
30 10.50 7.00
32 11.00 7.50
34 11.50 8.00
36 12.00 8.50
40 13.00 9.50
44 14.00 10.50
50 15.50 12.00
60 18.00 14.50
70 20.50 17.00
80 23.00 19.50
100 28.00 24.50
• Socket and header are mated
Mated height: 1.5 mm
1.50±0.15
0.50±0.05
A
B±0.1
0.50±0.05
0.20±0.03
C
0.12±0.03
Mated height: 2.0 mm
2.00±0.15
0.10
Mated height
1.5 mm, 2.0 mm
2.5 mm
C
1.25
1.75
Mated height: 2.5 mm
2.50±0.15
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
11/2005