B1018A.pdf 데이터시트 (총 5 페이지) - 파일 다운로드 B1018A 데이타시트 다운로드

No Preview Available !

2SB1018A
www.DataSheet4U.com
TOSHIBA Transistor Silicon NPN Triple Diffused Type (PCT Process)
2SB1018A
High Current Switching Applications
Power Amplifier Applications
Unit: mm
High collector current: IC = 7 A
Low collector saturation voltage: VCE (sat) = 0.5 V (max) (IC = 4 A)
Complementary to 2SD1411A
Absolute Maximum Ratings (Tc = 25°C)
Characteristics
Symbol
Rating
Unit
Collector-base voltage
VCBO
100
V
Collector-emitter voltage
VCEO 80 V
Emitter-base voltage
VEBO 5 V
Collector current
IC 7 A
Base current
IB 1 A
Collector power
dissipation
Ta = 25°C
Tc = 25°C
PC
2.0
W
30
Junction temperature
Tj 150 °C
Storage temperature range
Tstg
55 to 150
°C
JEDEC
JEITA
TOSHIBA
2-10R1A
Note: Using continuously under heavy loads (e.g. the application of high
Weight: 1.7 g (typ.)
temperature/current/voltage and the significant change in temperature, etc.) may cause this product to
decrease in the reliability significantly even if the operating conditions (i.e. operating
temperature/current/voltage, etc.) are within the absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report
and estimated failure rate, etc).
1 2006-11-21

No Preview Available !

Electrical Characteristics (Tc = 25°C)
2SB1018A
www.DataSheet4U.com
Characteristics
Collector cut-off current
Emitter cut-off current
Collector-emitter breakdown voltage
DC current gain
Collector-emitter saturation voltage
Base-emitter saturation voltage
Transition frequency
Collector output capacitance
Symbol
Test Condition
ICBO
VCB = 100 V, IE = 0
IEBO
VEB = 5 V, IC = 0
V (BR) CEO IC = 50 mA, IB = 0
hFE (1)
(Note)
VCE = 1 V, IC = 1 A
hFE (2)
VCE (sat)
VCE = 1 V, IC = 4 A
IC = 4 A, IB = 0.4 A
VBE (sat) IC = 4 A, IB = 0.4 A
fT VCE = 4 V, IC = 1 A
Cob VCB = 10 V, IE = 0, f = 1 MHz
Min Typ. Max Unit
― ― −5 μA
― ― −5 μA
80
V
70 240
30 ― ―
― −0.3 0.5
― −0.9 1.4
V
10 MHz
250
pF
Turn-on time
ton
20 μs Input IB2
Output
0.4
Switching time Storage time
Fall time
tstg IB1
VCC = 30 V
tf
IB1 = IB2 = 0.3 A, duty cycle 1%
Note: hFE (1) classification O: 70 to 140, Y: 120 to 240
2.5
μs
0.5
Marking
B1018A
Characteristics
indicator
Part No. (or abbreviation code)
Lot No.
A line indicates
lead (Pb)-free package or
lead (Pb)-free finish.
2 2006-11-21

No Preview Available !

10
180
8
200 160
6
4
2
IC – VCE
Common emitter
Tc = 25°C
140
120
100
80
60
40
IB = 20 mA
0
0
0 2 4 6 8 10
Collector-emitter voltage VCE (V)
IC – VCE
1.2
Common emitter
1.0
Tc = 100°C
0.8
IB = 20 mA 40 100 200
0.6
0.4
0.2
700
300
400
500
600
0
0 1 2 3 4 5 6 7
Collector current IC (A)
2SB1018A
www.DataSheet4U.com
VCE – IC
1.2
Common emitter
1.0
Tc = 25°C
0.8 IB = 20 mA
40
100
0.6
200
0.4
0.2
700
300
400
500
600
0
0 1 2 3 4 5 6 7
Collector current IC (A)
1.2
1.0
0.8 IB = 20 mA
0.6
VCE – IC
100 150
Common emitter
Tc = 55°C
300
0.4
0.2
0
0
700
200
400
500
600
1 2 3 4 5 6 7
Collector current IC (A)
1000
500
300
100
50
30
hFE – IC
Tc = 100°C
25
Common emitter
VCE = 1 V
55
10
0.03
0.1
0.3
1
3
Collector current IC (A)
10
VCE (sat) – IC
1
Common emitter
0.5 IC/IB = 10
0.3
0.1
0.05
0.03
Tc = 100°C
55
25
0.01
0.03
0.1
0.3
1
3
Collector current IC (A)
10
3 2006-11-21

No Preview Available !

VBE (sat) – IC
10
Common emitter
5 IC/IB = 10
3
1
0.5
0.3
Tc = 55°C
100 25
0.1
0.03
0.1
0.3
1
3
Collector current IC (A)
10
2SB1018A
www.DataSheet4U.com
Tc = 100°C
6
IC – VBE
Common emitter
VCE = 1 V
55
4
25
2
0
0
0.8
1.6
2.4
3.2
Base-emitter voltage VBE (V)
rth – tw
100
Curves apply only to limited areas of thermal resistance.
(single nonrepetitive pulse)
(1) Infinite heat sink
(2) No heat sink
10
1
(2)
(1)
0.1
0.001
0.01
0.1 1 10
Pulse width tw (s)
100 1000
Safe Operating Area
20
10 IC max (pulsed)*
5 IC max
(continuous)
3
DC operation
Tc = 25°C
1 ms*
10 ms*
100 ms*
1
0.5
0.3 *: Single nonrepetitive pulse
Tc = 25°C
Curves must be derated linearly
with increase in temperature.
0.1
1 3 10
VCEO max
30 100
Collector-emitter voltage VCE (V)
4
2006-11-21

No Preview Available !

2SB1018A
www.DataSheet4U.com
RESTRICTIONS ON PRODUCT USE
The information contained herein is subject to change without notice.
20070701-EN
TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
5 2006-11-21