L-C150KGCT.pdf 데이터시트 (총 10 페이지) - 파일 다운로드 L-C150KGCT 데이타시트 다운로드

No Preview Available !

SURFACE MOUNT DEVICE LED
Part No. : L-C150KGCT
REV:A / 03
PACKAGE OUTLINE DIMENSIONS
0.55
1.20
R0.10
1.10
2.10
0.55
5.00°
1.10
0.50
0.48 ~ 0.50
Notes:
1. All dimensions are in millimeters.
2. Tolerance is ± 0.1mm (.004") unless otherwise noted.
Features
Top view, wide view angle, single color Chip LED.
Package in 8mm tape on 7" diameter reels.
Compatible with automatic Pick & Place equipment.
Compatible with Infrared and Wave soldering reflow solder processes.
EIA STD package.
I.C. compatible.
DRAWING NO. : DS-71-03-0005
www.DataSheet.in
DATE : 2004-06-07 PAGE 1

No Preview Available !

SURFACE MOUNT DEVICE LED
Part No. : L-C150KGCT
REV:A / 03
Chip Materials
Dice Material : AlInGaP
Light Color : Super Green
Lens Color : Water Clear
Absolute Maximum Ratings(Ta=25)
Symbol
Parameter
Rating
Unit
PD Power Dissipation
60 mW
IPF
Peak Forward Current
(1/10 Duty Cycle, 0.1ms Pulse Width)
60 mA
IF Continuous Forward Current
30 mA
- De-rating Linear From 25
0.25 mA/
VR Reverse Voltage
ESD Electrostatic Discharge Threshold(HBM)Note A
5
2000
V
V
Topr Operating Temperature Range
-40 ~ +85
Tstg Storage Temperature Range
-40 ~ +85
- Wave Soldering Condition (Two times Max.)
260 (for 5 seconds)
- Infrared Soldering Condition (Two times MAX.) 240 (for 10 seconds)
Note A :
HBM : Human Body Model. Seller gives no other assurances regarding the ability of to
withstand ESD.
Electro-Optical Characteristics(Ta=25)
Parameter
Symbol Min. Typ. Max. Unit
Test Condition
Luminous Intensity
IV 16.0 30.0 60.0 mcd
IF=20mA
Viewing Angle
2θ1/2
130
deg Note 2
Peak Emission
Wavelength
λp
571
nm Measurement @Peak
Dominant Wavelength
λd
570
nm IF=20mA
Spectral Line
Half-Width
Δλ
15
nm
Forward Voltage
VF
2.05 2.4
V
IF =20mA
Reverse Current
IR
100 μA
VR = 5V
DRAWING NO. : DS-71-03-0005
DATE : 2004-06-07 PAGE 2
www.DataSheet.in

No Preview Available !

SURFACE MOUNT DEVICE LED
Part No. : L-C150KGCT
REV:A / 03
Notes:
1. Luminous intensity is measured with a light sensor and filter combination that
proximities the CIE eye-response curve.
2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous
intensity.
3. The dominant wavelength λd is derived from the CIE chromaticity diagram and
represents the single wavelength which defines the color of the device.
4. Caution in ESD :
Static Electricity and surge damages the LED. It is recommend use a wrist band or
anti-electrostatic glove when handling the LED. All devices, equipment and machinery
must be properly grounded.
5. Major standard testing equipment by “Instrument System” Model : CAS140B Compact
Array Spectrometer and “KEITHLEY” Source Meter Model : 2400.
Typical Electro-Optical Characteristics Curves
Fig.1 Relative Intensity vs. Wavelength
DRAWING NO. : DS-71-03-0005
www.DataSheet.in
DATE : 2004-06-07 PAGE 3