L-C150KRCT.pdf 데이터시트 (총 10 페이지) - 파일 다운로드 L-C150KRCT 데이타시트 다운로드

No Preview Available !

SURFACE MOUNT DEVICE LED
Part No. : L-C150KRCT
PACKAGE OUTLINE DIMENSIONS
REV:A / 0
0.55
1.20
R0.10
1.10
2.10
0.55
5.00°
1.10
0.50
0.48 ~ 0.50
Notes:
1. All dimensions are in millimeters.
2. Tolerance is ± 0.1mm (.004") unless otherwise noted.
Features
Top view, wide view angle, single color Chip LED.
Package in 8mm tape on 7" diameter reels.
Compatible with automatic Pick & Place equipment.
Compatible with Infrared and Wave soldering reflow solder processes.
EIA STD package.
I.C. compatible.
DRAWING NO. : DS-71-03-0008
www.DataSheet.in
DATE : 2003-12-10
PAGE 1

No Preview Available !

SURFACE MOUNT DEVICE LED
Part No. : L-C150KRCT
REV:A / 0
Chip Materials
Dice Material : AlInGaP
Light Color : Super Red
Lens Color : Water Clear
Absolute Maximum Ratings(Ta=25)
Symbol
Parameter
Rating
Unit
PD Power Dissipation
75 mW
IPF
Peak Forward Current
(1/10 Duty Cycle, 0.1ms Pulse Width)
80 mA
IF Continuous Forward Current
30 mA
- De-rating Linear From 25
0.25 mA/
VR Reverse Voltage
ESD Electrostatic Discharge Threshold(HBM)Note A
5
2000
V
V
Topr Operating Temperature Range
-40 ~ +85
Tstg Storage Temperature Range
-40 ~ +85
- Wave Soldering Condition (Two times Max.)
260 (for 5 seconds)
- Infrared Soldering Condition (Two times MAX.) 240 (for 5 seconds)
Note A :
HBM : Human Body Model. Seller gives no other assurances regarding the ability of to
withstand ESD.
Electro-Optical Characteristics(Ta=25)
Parameter
Luminous Intensity
Viewing Angle
Peak Emission
Wavelength
Dominant Wavelength
Spectral Line
Half-Width
Forward Voltage
Reverse Current
Symbol
IV
2θ1/2
λp
λd
Δλ
VF
IR
Min.
16.0
Typ. Max.
40.0 80.0
130
639
631
17
2.0 2.4
100
Unit Test Condition
mcd IF=20mA
deg Note 2
nm Measurement @Peak
nm IF=20mA
nm
V IF =20mA
μA VR = 5V
DRAWING NO. : DS-71-03-0008
www.DataSheet.in
DATE : 2003-12-10
PAGE 2

No Preview Available !

SURFACE MOUNT DEVICE LED
Part No. : L-C150KRCT
REV:A / 0
Notes:
1. Luminous intensity is measured with a light sensor and filter combination that
proximities the CIE eye-response curve.
2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous
intensity.
3. The dominant wavelength λd is derived from the CIE chromaticity diagram and
represents the single wavelength which defines the color of the device.
4. Caution in ESD :
Static Electricity and surge damages the LED. It is recommend use a wrist band or
anti-electrostatic glove when handling the LED. All devices, equipment and machinery
must be properly grounded.
5. Major standard testing equipment by “Instrument System” Model : CAS140B Compact
Array Spectrometer and “KEITHLEY” Source Meter Model : 2400.
Typical Electro-Optical Characteristics Curves
Fig.1 Relative Intensity vs. Wavelength
DRAWING NO. : DS-71-03-0008
www.DataSheet.in
DATE : 2003-12-10
PAGE 3