LUR3333H-S46-LTS-PF.pdf 데이터시트 (총 6 페이지) - 파일 다운로드 LUR3333H-S46-LTS-PF 데이타시트 다운로드

No Preview Available !

LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Onlwyww.DataSheet4U.com
SUPER BRIGHT ROUND TYPE LED LAMPS
Pb
Lead-Free Parts
LUR3333H/S46-LTS-PF
DATA SHEET
DOC. NO : QW0905- LUR3333H/S46-LTS-PF
REV. : B
DATE : 04 - Jan. - 2007

No Preview Available !

PART NO. LUR3333H/S46-LTS-PF
Package Dimensions
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
www.DataSheet4U.com
Page 1/5
5.0 5.9
7.6 8.6
1.5MAX
0.5
TYP
25.0MIN
2.54TYP
+-
1.0MIN
Note : 1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted.
2.Specifications are subject to change without notice.
Directivity Radiation
0°
-30° 30°
-60° 60°
100% 75% 50% 25% 0 25% 50% 75% 100%

No Preview Available !

PART NO. LUR3333H/S46-LTS-PF
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
www.DataSheet4U.com
Page 2/5
Absolute Maximum Ratings at Ta=25
Parameter
Symbol
Ratings
UR(H)
UNIT
Forward Current
Peak Forward Current
Duty 1/10@10KHz
Power Dissipation
Reverse Current @5V
Electrostatic Discharge( * )
IF
IFP
PD
Ir
ESD
50
100
130
10
2000
mA
mA
mW
μA
V
Operating Temperature
Topr
-40 ~ +85
Storage Temperature
Tstg
-40 ~ +100
* Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic
glove is recommended when handing these LED. All devices, equipment and machinery must be properly
grounded.
Typical Electrical & Optical Characteristics (Ta=25 )
PART NO
MATERIAL
COLOR
Emitted Lens
Dominant
wave
length
λDnm
Spectral
halfwidth
△λnm
Forward
voltage
@20mA(V)
Luminous
intensity
@20mA(mcd)
Viewing
angle
2θ 1/2
(deg)
Min. Max. Min. Typ.
LUR3333H/S46-LTS-PF AlGaInP/GaP Red Water Clear 630
20 1.7 2.6 2700 5000 30
Note : 1.The forward voltage data did not including ±0.1V testing tolerance.
2. The luminous intensity data did not including ±15% testing tolerance.

No Preview Available !

PART NO. LUR3333H/S46-LTS-PF
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
www.DataSheet4U.com
Page 3/5
Typical Electro-Optical Characteristics Curve
UR(H) CHIP
Fig.1 Forward current vs. Forward Voltage
Fig.2 Relative Intensity vs. Forward Current
1000
100
10
1
01
1.0
1.5 2.0 2.5
Forward Voltage(V)
3.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
1
10 100
Forward Current(mA)
1000
Fig.3 Forward Voltage vs. Temperature
Fig.4 Relative Intensity vs. Temperature
1.2
1.1
1.0
0.9
0.8
-40
-20
0
20 40 60 80 100
Ambient Temperature()
3.0
2.5
2.0
1.5
1.0
0.5
0.0
-40 -20 0 20 40 60 80 100
Ambient Temperature()
Fig.5 Relative Intensity vs. Wavelength
1.0
0.5
0.0
550
600 650
Wavelength (nm)
700

No Preview Available !

PART NO. LUR3333H/S46-LTS-PF
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
www.DataSheet4U.com
Page 4/5
Soldering Condition(Pb-Free)
1.Iron:
Soldering Iron:30W Max
Temperature 350 °C Max
Soldering Time:3 Seconds Max(One time only)
Distance:2mm Min(From solder joint to body)
2.Wave Soldering Profile
Dip Soldering
Preheat: 120° C Max
Preheat time: 60seconds Max
Ramp-up
2° C/sec(max)
Ramp-Down:-5° C/sec(max)
Solder Bath:260° C Max
Dipping Time:3 seconds Max
Distance:2mm Min(From solder joint to body)
Temp(° C)
260°
120°
260° C3sec Max
5° /sec
max
2° /sec
25° max
0° 0
Preheat
50
60 Seconds Max
100
Note: 1.Wave solder should not be made more than one time.
2.You can just only select one of the soldering conditions as above.
150
Time(sec)