LURF13533-PF.pdf 데이터시트 (총 6 페이지) - 파일 다운로드 LURF13533-PF 데이타시트 다운로드

No Preview Available !

LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Onlywww.DataSheet4U.com
SUPER BRIGHT ROUND TYPE LED LAMPS
Pb
Lead-Free Parts
LURF13533-PF
DATA SHEET
DOC. NO : QW0905-LURF13533-PF
REV. : A
DATE : 19 - Jul. - 2008

No Preview Available !

PART NO. LURF13533-PF
Package Dimensions
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
www.DataSheet4U.com
Page 1/4
5.0
8.6
1.5MAX
0.5
TYP
25.0MIN
1.0MIN
2.54TYP
Note : 1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted.
2.Specifications are subject to change without notice.
Directivity Radiation
0°
-30° 30°
-60° 60°
100% 75% 50% 25% 0 25% 50% 75% 100%

No Preview Available !

PART NO. LURF13533-PF
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
www.DataSheet4U.com
Page 2/5
Absolute Maximum Ratings at Ta=25
Parameter
Symbol
Ratings
URF
UNIT
Forward Current
Peak Forward Current
Duty 1/10@10KHz
Power Dissipation
IF
IFP
PD
50 mA
130 mA
120 mW
Reverse Current @5V
Ir
10 μA
Electrostatic Discharge( * )
ESD
2000
V
Operating Temperature
Topr
-40 ~ +85
Storage Temperature
Tstg
-40 ~ +100
* Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic
glove is recommended when handing these LED. All devices, equipment and machinery must be properly
grounded.
Typical Electrical & Optical Characteristics (Ta=25 )
PART NO MATERIAL
COLOR
Emitted Lens
LURF13533-PF AlGaInP Red Water Clear
Dominant
wave
length
λDnm
Spectral
halfwidth
△λnm
Forward
voltage
@20mA(V)
Luminous
intensity
@20mA(mcd)
Viewing
angle
2θ 1/2
(deg)
Min. Max. Min. Typ.
630 20 1.5 2.4 3400 5000 20
Note : 1.The forward voltage data did not including ±0.1V testing tolerance.
2. The luminous intensity data did not including ±15% testing tolerance.

No Preview Available !

PART NO. LURF13533-PF
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
www.DataSheet4U.com
Page 3/5
Typical Electro-Optical Characteristics Curve
URF CHIP
Fig.1 Forward current vs. Forward Voltage
Fig.2 Relative Intensity vs. Forward Current
1000
100
10
1.0
0.1
1.0
1.5 2.0 2.5
Forward Voltage(V)
3.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
1.0
10 100
Forward Current(mA)
1000
Fig.3 Forward Voltage vs. Temperature
1.2
1.1
1.0
0.9
0.8
-40 -20
-0
20 40 60 80 100
Ambient Temperature()
Fig.4 Relative Intensity vs. Temperature
3.0
2.5
2.0
1.5
1.0
0.5
0
-40 -20 -0 20 40 60 80 100
Ambient Temperature()
Fig.5 Relative Intensity vs. Wavelength
1.0
0.5
0
550
600 650
Wavelength (nm)
700

No Preview Available !

PART NO. LURF13533-PF
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
www.DataSheet4U.com
Page 4/5
Soldering Condition(Pb-Free)
1.Iron:
Soldering Iron:30W Max
Temperature 350 ° C Max
Soldering Time:3 Seconds Max(One time only)
Distance:2mm Min(From solder joint to body)
2.Wave Soldering Profile
Dip Soldering
Preheat: 120° C Max
Preheat time: 60seconds Max
Ramp-up
2° C/sec(max)
Ramp-Down:-5° C/sec(max)
Solder Bath:260° C Max
Dipping Time:3 seconds Max
Distance:2mm Min(From solder joint to body)
Temp(° C)
260°
120°
25°
0° 0
2° /sec
max
Preheat
50
60 Seconds Max
260° C3sec Max
5° /sec
max
100
Note: 1.Wave solder should not be made more than one time.
2.You can just only select one of the soldering conditions as above.
150
Time(sec)