LURF3933S-PF.pdf 데이터시트 (총 6 페이지) - 파일 다운로드 LURF3933S-PF 데이타시트 다운로드

No Preview Available !

LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
www.DataSheet4U.com
SUPER BRIGHT ROUND TYPE LED LAMPS
Pb
Lead-Free Parts
LURF3933S-PF
DATA SHEET
DOC. NO : QW0905-LURF3933S-PF
REV. : A
DATE : 17 - Oct. - 2006

No Preview Available !

PART NO. LURF3933S-PF
Package Dimensions
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
www.DataSheet4U.com
Page 1/5
8.0 9.1
1.5MAX
0.5
TYP
9.0 11.0
25.0MIN
2.54TYP
+-
1.0MIN
Note : 1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted.
2.Specifications are subject to change without notice.
Directivity Radiation
0°
-30° 30°
-60° 60°
100% 75% 50% 25% 0 25% 50% 75% 100%

No Preview Available !

PART NO. LURF3933S-PF
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
www.DataSheet4U.com
Page 2/5
Absolute Maximum Ratings at Ta=25
Parameter
Symbol
Ratings
URF(S)
UNIT
Forward Current
Peak Forward Current
Duty 1/10@10KHz
Power Dissipation
Reverse Current @5V
Electrostatic Discharge( * )
Operating Temperature
IF
IFP
PD
Ir
ESD
Topr
50
90
120
10
2000
-40 ~ +85
mA
mA
mW
μA
V
Storage Temperature
Tstg
-40 ~ +100
* Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic
glove is recommended when handing these LED. All devices, equipment and machinery must be properly
grounded.
Typical Electrical & Optical Characteristics (Ta=25 )
PART NO
LURF3933S-PF
MATERIAL
COLOR
Emitted Lens
Dominant
wave
length
λDnm
Spectral
halfwidth
△λnm
Forward
voltage
@20mA(V)
Luminous
intensity
@20mA(mcd)
Viewing
angle
2θ 1/2
(deg)
Min. Max. Min. Typ.
AlGaInP Red Water Clear
625
20 1.7 2.6 6200 9500 20
Note : 1.The forward voltage data did not including ±0.1V testing tolerance.
2. The luminous intensity data did not including ±15% testing tolerance.

No Preview Available !

PART NO. LURF3933S-PF
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
www.PDaatagSehe3et/45U.com
Typical Electro-Optical Characteristics Curve
URFS CHIP
Fig.1 Forward current vs. Forward Voltage
Fig.2 Luminous Intensity vs. Forward Current
150
100
50
0
0
0.5 1.0 1.5 2.0 2.5 3.0
Forward Voltage(V)
Fig.3 Forward Voltage vs. Temperature
6.0
5.0
4.0
3.0
2.0
1.0
0.0
0
50 100
Forward Current(mA)
150
Fig.4 Luminous Intensity vs. Temperature
1.06
1.04
1.02
1.00
0.98
0.96
0.94
-40 -20 0 20 40 60 80 100
Ambient Temperature()
Fig.5 Relative Intensity vs. Wavelength
1.0
1.2
1.0
0.8
0.6
0.4
0.2
0.0
-40 -20 0 20 40 60 80 100
Ambient Temperature()
0.5
0
550
600 650
Wavelength (nm)
700

No Preview Available !

PART NO. LURF3933S-PF
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
www.DataSheet4U.com
Page 4/5
Soldering Condition(Pb-Free)
1.Iron:
Soldering Iron:30W Max
Temperature 350° C Max
Soldering Time:3 Seconds Max(One time only)
Distance:2mm Min(From solder joint to body)
2.Wave Soldering Profile
Dip Soldering
Preheat: 120° C Max
Preheat time: 60seconds Max
Ramp-up
2° C/sec(max)
Ramp-Down:-5° C/sec(max)
Solder Bath:260° C Max
Dipping Time:3 seconds Max
Distance:2mm Min(From solder joint to body)
Temp(° C)
260°
120°
260° C3sec Max
5° /sec
max
2° /sec
25° max
0° 0 50
Preheat
60 Seconds Max
100
Note: 1.Wave solder should not be made more than one time.
2.You can just only select one of the soldering conditions as above.
150
Time(sec)