L12URF9653S-50B-AM.pdf 데이터시트 (총 6 페이지) - 파일 다운로드 L12URF9653S-50B-AM 데이타시트 다운로드

No Preview Available !

LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
SQUARE WITH 4LEADS TYPE LED LAMPS
Pb
Lead-Free Parts
L12URF9653S-50B-AM
DATA SHEET
www.DataSheet4U.com
DOC. NO : QW0905-L12URF9653S-50B-AM-B01
REV.
:A
DATE
: 05 - Dec.- 2008

No Preview Available !

PART NO. L12URF9653S-50B-AM
Package Dimensions
R0.7
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 1/6
CATHODE
4.55
ANODE
7.62±0.5
3.4
7.62±0.5
2.5±0.5
0.5
5.08±0.3
1.55
5.08
Note : 1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted.
2.Specifications are subject to change without notice.
Directivity Radiation
4.8±0.5
3.5±0.5
0°
-30° 30°
-60°
www.DataSheet4U.com
60°
100% 75% 50% 25% 0 25% 50% 75% 100%

No Preview Available !

LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
PART NO. L12URF9653S-50B-AM
Page 2/5
Absolute Maximum Ratings at Ta=25
Parameter
Symbol
Forward Current
Peak Forward Current
Duty 1/10@10KHz
Power Dissipation
Reverse Current @5V
Electrostatic Discharge( * )
Operating Temperature
IF
IFP
PD
Ir
ESD
Topr
Ratings
URF(S)
70
90
210
10
2000
-40 ~ +85
UNIT
mA
mA
mW
μA
V
Storage Temperature
Tstg
-40 ~ +100
* Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic
glove is recommended when handing these LED. All devices, equipment and machinery must be properly
grounded.
Typical Electrical & Optical Characteristics (Ta=25 )
PART NO
MATERIAL
COLOR
Emitted Lens
Dominant
wave
length
λDnm
Spectral
halfwidth
△λnm
Forward
voltage
@70mA(V)
Luminous
Flux
@70mA(lm)
Viewing
angle
2θ 1/2
(deg)
Min. Max. Min. Typ.
L12URF9653S-50B-AM AlGaInP
www.DataSheet4U.com
Red Water Clear
625
20 2.0 3.0 4.9 8.2 18
Note : 1.The forward voltage data did not including ±0.1V testing tolerance.
2. The luminous intensity data did not including ±15% testing tolerance.

No Preview Available !

PART NO. L12URF9653S-50B-AM
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 3/5
Typical Electro-Optical Characteristics Curve
URFS CHIP
Fig.1 Forward current vs. Forward Voltage
Fig.2 Luminous Intensity vs. Forward Current
150
100
50
0
0
0.5 1.0 1.5 2.0 2.5 3.0
Forward Voltage(V)
Fig.3 Forward Voltage vs. Temperature
6.0
5.0
4.0
3.0
2.0
1.0
0.0
0
50 100
Forward Current(mA)
150
Fig.4 Luminous Intensity vs. Temperature
1.06
1.04
1.02
1.00
0.98
0.96
0.94
-40 -20 0 20 40 60 80 100
Ambient Temperature()
Fig.5 Relative Intensity vs. Wavelength
1.0
1.2
1.0
0.8
0.6
0.4
0.2
0.0
-40 -20 0 20 40 60 80 100
Ambient Temperature()
www.DataSheet4U0..5com
0
550
600 650
Wavelength (nm)
700

No Preview Available !

PART NO. L12URF9653S-50B-AM
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 4/5
Soldering Condition(Pb-Free)
1.Iron:
Soldering Iron:30W Max
Temperature 350° C Max
Soldering Time:3 Seconds Max(One time only)
Distance:2mm Min(From solder joint to body)
2.Wave Soldering Profile
Dip Soldering
Preheat: 120° C Max
Preheat time: 60seconds Max
Ramp-up
2° C/sec(max)
Ramp-Down:-5° C/sec(max)
Solder Bath:260° C Max
Dipping Time:3 seconds Max
Distance:2mm Min(From solder joint to body)
Temp(° C)
260°
120°
25°
www.DataSheet4U.com0° 0
2° /sec
max
Preheat
50
60 Seconds Max
260° C3sec Max
5° /sec
max
100
Note: 1.Wave solder should not be made more than one time.
2.You can just only select one of the soldering conditions as above.
150
Time(sec)