2SA562TM.pdf 데이터시트 (총 3 페이지) - 파일 다운로드 2SA562TM 데이타시트 다운로드

No Preview Available !

TOSHIBA Transistor Silicon PNP Epitaxial Type (PCT process)
2SA562TM
2SA562TM
Audio Frequency Low Power Amplifier Applications
Driver Stage Amplifier Applications
Switching Applications
Unit: mm
· Excellent hFE linearity: hFE (2) = 25 (min)
at VCE = 6 V, IC = 400 mA
· 1 watt amplifier application.
· Complementary to 2SC1959.
Maximum Ratings (Ta = 25°C)
Characteristics
Collector-base voltage
Collector-emitter voltage
Emitter-base voltage
Collector current
Base current
Collector power dissipation
Junction temperature
Storage temperature range
Symbol
VCBO
VCEO
VEBO
IC
IB
PC
Tj
Tstg
Rating
-35
-30
-5
-500
-100
500
150
-55~150
Unit
V
V
V
mA
mA
mW
°C
°C
Electrical Characteristics (Ta = 25°C)
Characteristics
Symbol
Test Condition
Collector cut-off current
Emitter cut-off current
DC current gain
Collector-emitter saturation voltage
Base-emitter voltage
Transition frequency
Collector output capacitance
ICBO
VCB = -35 V, IE = 0
IEBO
VEB = -5 V, IC = 0
hFE (1)
VCE = -1 V, IC = -100 mA
(Note)
hFE (2)
VCE = -6 V, IC = -400 mA
(Note)
VCE (sat)
VBE
fT
Cob
IC = -100 mA, IB = -10 mA
VCE = -1 V, IC = -100 mA
VCE = -6 V, IC = -20 mA
VCB = -6 V, IE = 0, f = 1 MHz
Note: hFE (1) classification O: 70~140, Y: 120~240
hFE (2) classification O: 25 (min), Y: 40 (min)
JEDEC
TO-92
JEITA
SC-43
TOSHIBA
2-5F1B
Weight: 0.21 g (typ.)
Min Typ. Max Unit
¾ ¾ -0.1 mA
¾ ¾ -0.1 mA
70 ¾ 240
25 ¾ ¾
¾ -0.1 -0.25 V
¾ -0.8 -1.0
V
¾ 200 ¾ MHz
¾ 13 ¾ pF
1 2003-03-27

No Preview Available !

2SA562TM
2 2003-03-27

No Preview Available !

2SA562TM
RESTRICTIONS ON PRODUCT USE
000707EAA
· TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc..
· The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this
document shall be made at the customer’s own risk.
· The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other
rights of the third parties which may result from its use. No license is granted by implication or otherwise under
any intellectual property or other rights of TOSHIBA CORPORATION or others.
· The information contained herein is subject to change without notice.
3 2003-03-27