2SA608N.pdf 데이터시트 (총 4 페이지) - 파일 다운로드 2SA608N 데이타시트 다운로드

No Preview Available !

Ordering number:ENN6324
PNP/NPN Epitaxial Planar Silicon Transistors
2SA608N/2SC536N
Low-Frequency
General-Purpose Amplifier Applications
Applications
· Capable of being used in the low frequency to high
frequency range.
Features
· Large current capacity and wide ASO.
Package Dimensions
unit:mm
2164
[2SA608N/2SC536N]
4.5
3.7 3.5
0.45
0.5
1.27
0.45
( ) : 2SA608N
Specifications
Absolute Maximum Ratings at Ta = 25˚C
Parameter
Collector-to-Base Voltage
Collector-to-Emitter Voltage
Emitter-to-Base Voltage
Collector Current
Collector Current (Pulse)
Collector Dissipation
Junction Temperature
Storage Temperature
Symbol
VCBO
VCEO
VEBO
IC
ICP
PC
Tj
Tstg
123
2.5 2.5
Conditions
Electrical Characteristics at Ta = 25˚C
Parameter
Symbol
Conditions
Collector Cutoff Current
Emitter Cutoff Current
DC Current Gain
ICBO
IEBO
hFE1
hFE2
VCB=(–)40V, IE=0
VEB=(–)5V, IC=0
VCE=(–)6V, IC=(–)1mA
VCE=(–)6V, IC=(–)0.1mA
* The 2SA608N/2SC536N are classified by 1mA hFE as follow
Rank
F
G
hFE 160 to 320 280 to 560
0.44
1 : Emitter
2 : Collector
3 : Base
SANYO : NPA-WA
Ratings
(–50)60
(–)50
(–)6
(–)150
(–)400
500
150
–55 to +150
Unit
V
V
V
mA
mA
mW
˚C
˚C
Ratings
min typ max
Unit
(–)0.1 µA
(–)0.1 µA
160*
560*
70
Continued on next page.
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
10700TS (KOTO) TA-2543 No.6324–1/4

No Preview Available !

Continued on preceding page.
Parameter
Gain-Bandwidth Product
Output Capacitance
Collector-to-Emitter Saturation Voltage
Base-to-Emitter Saturation Voltage
Collector-to-Base Breakdown Voltage
Collector-to-Emitter Breakdown Voltage
Emitter-to-Base Breakdown Voltage
2SA608N/2SC536N
Symbol
Conditions
fT VCE=(–)6V, IC=(–)10mA
Cob VCB=(–)6V, f=1MHz
VCE(sat)
VBE(sat)
V(BR)CBO
V(BR)CEO
V(BR)EBO
IC=(–)100mA, IB=(–)10mA
IC=(–)100mA, IB=(–)10mA
IC=(–)10µA, IE=0
IC=(–)1mA, RBE=
IE=(–)10µA, IC=0
Ratings
min typ
200
3.0
(4.5)
(–)60
(–)50
(–)6
max
(–)0.3
(–)1.0
Unit
MHz
pF
pF
V
V
V
V
V
--16
--12
--8
--4
0
0
--240
--200
IC -- VCE
--50--µ45A--µ4A0µ--A35µA
--30µA
--25µA
2SA608N
--20µA
--15µA
--10µA
--5µA
IB=0
--10 --20 --30 --40 --50
Collector-to-Emitter Voltage, VCE – V IT00496
IC -- VBE
2SA608N
VCE=--6V
--160
--120
--80
--40
0
0
1000
7
5
3
2
100
7
5
3
2
--0.2
--0.4
--0.6
--0.8
--1.0
--1.2
Base-to-Emitter Voltage, VBE – V IT00498
hFE -- IC
2SA608N
VCE=--6V
Ta=75°C
--25°C
25°C
10
--0.1 2 3 5 7--1.0 2 3 5 7 --10 2 3 5 7--100 2 3 5 7--1000
Collector Current, IC – mA
IT00500
IC -- VCE
20
50µA
2SC536N
45µA
16 40µA
35µA
12 30µA
25µA
8 20µA
15µA
4 10µA
5µA IB=0
0
0 10 20 30 40
50
Collector-to-Emitter Voltage, VCE – V IT00497
IC -- VBE
240
2SC536N
VCE=6V
200
160
120
80
40
0
0
1000
7
5
3
2
0.2 0.4 0.6 0.8 1.0 1.2
Base-to-Emitter Voltage, VBE – V IT00499
hFE -- IC
2SC536N
VCE=6V
Ta=75°C
100
--25°C
25°C
7
5
3
2
10
0.1 2 3 5 7 1.0 2 3 5 7 10 2 3 5 7 100 2 3 5 7 1000
Collector Current, IC – mA
IT00501
No.6324–2/4

No Preview Available !

2SA608N/2SC536N
fT -- IC
fT -- IC
1000
1000
2SA608N
2SC536N
7
VCE=--6V
7
VCE=6V
55
33
22
100 100
77
55
33
22
10
--1.0 2 3
100
7
5
3
2
5 7 --10 2 3 5 7 --100 2
Collector Current, IC – mA
Cob -- VCB
3 5 7--1000
IT00502
2SA608N
f=1MHz
10
7
5
3
2
1.0
7
5
3
2
0.1
--0.1
--1.0
7
5
2 3 5 7 --1.0 2 3 5 7 --10 2 3
Collector-to-Base Voltage, VCB -- V
VCE(sat) -- IC
5 7 --100
IT00504
2SA608N
IC / IB=--10
3
2
10
1.0
100
7
5
3
2
23
5 7 10 2 3 5 7 100 2 3
Collector Current, IC – mA
Cob -- VCB
5 7 1000
IT00503
2SC536N
f=1MHz
10
7
5
3
2
1.0
7
5
3
2
0.1
0.1
1.0
7
5
2 3 5 7 1.0 2 3 5 7 10 2 3 5 7 100
Collector-to-Base Voltage, VCB -- V IT00505
VCE(sat) -- IC
2SC536N
IC / IB=10
3
2
--0.1
7
5
3
2
--0.01
--1.0 2 3
1000
7
5
3
2
100
7
5
3
2
ICP
IC
5 7 --10 2 3 5 7 --100 2 3
Collector Current, IC – mA
ASO
5 7--1000
IT00506
2SA608N / 2SC536N
For PNP, the polarity is reversed.
DC 100m1s0ms
operation
10
7
5
3
2
5 7 1.0
23
5 7 10
2 3 5 7 100
Collector-to-Emitter Voltage, VCE – V IT00511
0.1
7
5
3
2
0.01
1.0
600
23
5 7 10 2 3 5 7 100 2 3
Collector Current, IC – mA
PC -- Ta
5 7 1000
IT00507
2SA608N / 2SC536N
500
400
300
200
100
0
0 20 40 60 80 100 120 140 160
Ambient Temperature, Ta – ˚C
IT00510
No.6324–3/4

No Preview Available !

2SA608N/2SC536N
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of January, 2000. Specifications and information herein are subject
to change without notice.
PS No.6324–4/4