B101AW02-V3.pdf 데이터시트 (총 30 페이지) - 파일 다운로드 B101AW02-V3 데이타시트 다운로드

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
( ) Preliminary Specifications
( V) Final Specifications
Module
Model Name
Note ( )
10.1” SD Color TFT-LCD with LED Backlight design
B101AW02 V3 (HW:0A)
LED Backlight with driving circuit design
Customer
Date
Checked &
Approved by
Date
Note: This Specification is subject to change
without notice.
Approved by
Date
CH Lin
11/19/2009
Prepared by
Marcus Yen
11/19/2009
NBBU Marketing Division /
AU Optronics corporation
document version 1.0
www.DataSheet4U.net
1 of 36

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
Contents
1. Handling Precautions ...................................................................4
2. General Description .....................................................................5
2.1 General Specification .................................................................................................................................5
2.2 Optical Characteristics ...............................................................................................................................6
3. Functional Block Diagram ........................................................... 11
TBD4.1 Absolute Ratings of TFT LCD Module ..............................................................................................11
4.1 Absolute Ratings of TFT LCD Module......................................................................................................12
4.2 Absolute Ratings of Environment.............................................................................................................12
5. Electrical characteristics ............................................................. 13
5.1 TFT LCD Module ......................................................................................................................................13
5.2 Backlight Unit............................................................................................................................................15
6. Signal Characteristic .................................................................. 16
6.1 Pixel Format Image ..................................................................................................................................16
6.2 The input data format................................................................................................................................17
6.3 Signal Description/Pin Assignment ..........................................................................................................18
6.4 Interface Timing ........................................................................................................................................22
6.5 Power Sequence ......................................................................................................................................24
6.5.1 Panel Power Sequence.........................................................................................................................24
7. Connector Description ................................................................ 25
7.1 TFT LCD Module ......................................................................................................................................25
8. LED Driving Specification ............................................................ 26
8.1 Connector Description..............................................................................................................................26
8.2 Pin Assignment.........................................................................................................................................26
9. Vibration and Shock Test ............................................................ 27
9.1 Vibration Test ............................................................................................................................................27
9.2 Shock Test Spec: ......................................................................................................................................27
11. Mechanical Characteristics ........................................................ 29
11.1 LCM Outline Dimension..........................................................................................................................29
11. Shipping and Package .............................................................. 31
11.1 Shipping Label Format ...........................................................................................................................31
11.2 Carton package.......................................................................................................................................32
11.3 Shipping package of palletizing sequence .............................................................................................32
12. Appendix: EDID description....................................................... 33
document version 1.0
2 of 36

No Preview Available !

Version and
Date
1.0 2009/11/19
Page
All
Product Specification
AU OPTRONICS CORPORATION
Record of Revision
Old description
New Description
Initalize the Specification
Remark
document version 1.0
3 of 36

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
1. Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or
spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard
surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure
human earth when handling.
7) Do not open nor modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor
tilt the Interface Connector of the TFT Module.
10)After installation of the TFT Module into an enclosure (Notebook PC Bezel, for
example), do not twist nor bend the TFT Module even momentary. At designing the
enclosure, it should be taken into consideration that no bending/twisting forces are
applied to the TFT Module from outside. Otherwise the TFT Module may be
damaged.
11)Small amount of materials having no flammability grade is used in the LCD module.
The LCD module should be supplied by power complied with requirements of Limited
Power Source (IEC60950 or UL1950), or be applied exemption.
12)Disconnecting power supply before handling LCD modules, it can prevent electric
shock, DO NOT TOUCH the electrode parts, cables, connectors and LED circuit part
of TFT module that a LED light bar build in as a light source of back light unit. It can
prevent electrostic breakdown.
document version 1.0
4 of 36

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
2. General Description
B101AW02 V3 is a Color Active Matrix Liquid Crystal Display composed of a TFT LCD panel, a
driver circuit, and LED backlight system. The screen format is intended to support the 1024(H) x
600(V) screen and 262k colors (RGB 6-bits data driver) with LED backlight driving circuit. All
input signals are LVDS interface compatible.
B101AW02 V3 is designed for a display unit of notebook style personal computer and industrial
machine.
2.1 General Specification
The following items are characteristics summary on the table at 25 condition:
Items
Screen Diagonal
Active Area
Pixels H x V
Pixel Pitch
Pixel Arrangement
Display Mode
White Luminance
Note: ILED is LED current
Luminance Uniformity (5P)
Contrast Ratio
Response Time
Nominal Input Voltage VDD
Power Consumption (typ.)
Weight
Physical Size
(w/ bracket & PCBA)
Electrical Interface
Surface Treatment
Unit
[mm]
[mm]
Specifications
255.54(W”)
222.72(H) X 125.28(V)
1024x3(RGB) x 600
[mm] 0.2175 (H) x 0.2088 (V)
R.G.B. Vertical Stripe
[cd/m2]
Normally White
200 typ
(Note1)
1.25 max
[ms]
[Volt]
400 typ
16 typ
+3.3 typ.
[Watt] 2.1 @ Black Pattern
[Grams]
[mm]
170 max.
L
Max 243.5
Typical
243.0
Min 242.5
1 channel LVDS
Glare
W
147.0
146.5
145.0
T
3.6
-
document version 1.0
5 of 36