G104VN01_V1.pdf 데이터시트 (총 26 페이지) - 파일 다운로드 G104VN01_V1 데이타시트 다운로드

No Preview Available !

www.DataSheet4U.net
Avnet Embedded.
Support Around The Board
Avnet Embedded
Specification.
Datasheet
AUO G104VN01-V1
www.avnet-embedded.eu

No Preview Available !

www.DataSheet4U.net
( ) Preliminary Specifications
( V ) Final Specifications
Module
Model Name
10.4 Inch Color TFT-LCD
G104VN01 V1
G104VN01 V1
Customer
Date
Approved by
Date
Checked &
Approved by
Note: This Specification is subject to change
without notice.
Debbie Chiu
2009/07/21
Prepared by
Vivian Huang
2009/07/21
General Display Business Division /
AU Optronics corporation
G104VN01 V1 rev. 1.1
Page 1/24

No Preview Available !

www.DataSheet4U.net
G104VN01 V1
Contents
1. Operating Precautions.....................................................................................4
2. General Description .........................................................................................5
2.1 Display Characteristics...........................................................................................................5
2.2 Optical Characteristics ...........................................................................................................6
3. Functional Block Diagram ...............................................................................9
4. Absolute Maximum Ratings ..........................................................................10
4.1 Absolute Ratings of TFT LCD Module .................................................................................10
4.2 Absolute Ratings of Environment ........................................................................................10
5. Electrical Characteristics ..............................................................................11
5.1 TFT LCD Module .................................................................................................................. 11
5.2 Backlight Unit........................................................................................................................13
6. Signal Characteristics ...................................................................................14
6.1 Pixel Format Image ..............................................................................................................14
6.2 Scanning Direction ...............................................................................................................14
6.3 TFT-LCD Interface Signal Description .................................................................................15
6.4 The Input Data Format .........................................................................................................16
6.5 TFT-LCD Interface Timing ....................................................................................................17
6.6 Power ON/OFF Sequence ...................................................................................................18
7. Connector & Pin Assignment ........................................................................19
7.1 TFT-LCD Signal (CN1): LCD Connector .............................................................................19
7.2 LED Backlight Unit (CN2): Backlight Connector .................................................................19
7.3 LED Backlight Unit (CN4): Light bar Connector..................................................................19
8. Reliability Test Criteria ..................................................................................20
9. Mechanical Characteristics ...........................................................................21
9.1 LCM Outline Dimension (Front View) ..................................................................................21
9.2 LCM Outline Dimension (Rear View)...................................................................................22
10. Label and Packaging....................................................................................23
10.1 Shipping Label (on the rear side of TFT-LCD display) ......................................................23
10.2 Carton Package .................................................................................................................23
11 Safety.............................................................................................................24
11.1 Sharp Edge Requirements.................................................................................................24
11.2 Materials .............................................................................................................................24
11.3 Capacitors...........................................................................................................................24
11.4 National Test Lab Requirement..........................................................................................24
G104VN01 V1 rev. 1.1
Page 2/24

No Preview Available !

www.DataSheet4U.net
G104VN01 V1
Record of Revision
Version and Date Page
0.0 2009/02/03 All
1.0 2009/05/14 6
Old description
First Edition
Color / Chromaticity
Coordinates(Red x y, Green x y, Blue x y): TBD
13 Parameter guideline for LED backlight
13 Dimming Duty cycle Min: TBD
19 Connector & Pin Assignment
1.0 2009/07/21
21
22
23
5
LCM Outline Dimension (Front View)
LCM Outline Dimension (Rear View)
Label and Packaging
Weight 390g(typ.)
New Description
Add Min., Typ., Max.
Add VF, IF, PLED
Dimming Duty cycle Min: 5
Add LED Backlight Unit (CN4): Light bar Connector
Remove the 4 screw hole
Add CN4 drawing
Add Shipping Label, Carton Package
Weight 350g(typ.)
G104VN01 V1 rev. 1.1
Page 3/24

No Preview Available !

www.DataSheet4U.net
G104VN01 V1
1. Operating Precautions
1) Since front polarizer is easily damaged, please be cautious and not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or
spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or soft cloth.
5) Since the panel is made of glass, it may be broken or cracked if dropped or bumped on
hard surface.
6) To avoid ESD (Electro Static Discharde) damage, be sure to ground yourself before handling
TFT-LCD Module.
7) Do not open nor modify the module assembly.
8) Do not press the reflector sheet at the back of the module to any direction.
9) In case if a module has to be put back into the packing container slot after it was taken
out from the container, do not press the center of the LED light bar edge. Instead, press
at the far ends of the LED light bar edge softly. Otherwise the TFT Module may be
damaged.
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor
tilt the Interface Connector of the TFT Module.
11) TFT-LCD Module is not allowed to be twisted & bent even force is added on module in a very
short time. Please design your display product well to avoid external force applying to module
by end-user directly.
12) Small amount of materials without flammability grade are used in the TFT-LCD module. The
TFT-LCD module should be supplied by power complied with requirements of Limited Power
Source (IEC60950 or UL1950), or be applied exemption.
13) Severe temperature condition may result in different luminance, response time and lamp
ignition voltage.
14) Continuous operating TFT-LCD display under low temperature environment may accelerate
lamp exhaustion and reduce luminance dramatically.
15) The data on this specification sheet is applicable when LCD module is placed in landscape
position.
16) Continuous displaying fixed pattern may induce image sticking. It’s recommended to use
screen saver or shuffle content periodically if fixed pattern is displayed on the screen.
G104VN01 V1 rev. 1.1
Page 4/24