B101EW01_V2.pdf , 데이터시트 , 데이타시트

No Preview Available !

www.DataSheet4U.net

Product Specification

AU OPTRONICS CORPORATION

( ) Preliminary Specifications

( V ) Final Specifications

Module

Model Name

Note ( )

10.1” SD+ 16:9 Color TFT-LCD

B101EW01 V2

LED Backlight with driving circuit design

Customer

Date

Approved by

Date

All

Checked &

Approved by

7/23/2009

Date

Howard Lee

Prepared by

Carol Tang

7/23/2009

Note: This Specification is subject to change without

notice.

NBBU Marketing Division /

AU Optronics corporation

B101EW01 V2 document version : 2.0

1 of 38

No Preview Available !

www.DataSheet4U.net

Product Specification

AU OPTRONICS CORPORATION

Contents

1. Handling Precautions........................................................................................................ 4

2. General Description .......................................................................................................... 5

2.1 General Specification...................................................................................................................................... 5

2.2 Optical Characteristics ................................................................................................................................... 6

3. Functional Block Diagram ............................................................................................... 11

The following diagram shows the functional block of the 10.1 inches wide Color TFT/LCD

40 Pin (One ch/connector Module).4. Absolute Maximum Ratings...................................... 11

4. Absolute Maximum Ratings............................................................................................. 12

4.1 Absolute Ratings of TFT LCD Module......................................................................................................... 12

4.2 Absolute Ratings of Environment................................................................................................................ 12

5. Electrical characteristics ................................................................................................. 13

5.1 TFT LCD Module............................................................................................................................................ 13

5.2 Backlight Unit ................................................................................................................................................ 15

6. Signal Characteristic ....................................................................................................... 16

6.1 Pixel Format Image........................................................................................................................................ 16

6.2 The input data format.................................................................................................................................... 17

6.3 Integration Interface Requirement ............................................................................................................... 18

6.4 Interface Timing............................................................................................................................................. 20

6.5 Power Sequence............................................................................................................................................ 21

6.5.1 Panel Power Sequence .............................................................................................................................. 21

7. Panel Reliability Test ...................................................................................................... 23

7.1 Vibration Test ................................................................................................................................................. 23

7.2 Shock Test...................................................................................................................................................... 23

7.3 Reliability Test ............................................................................................................................................... 23

8. Mechanical Characteristics.............................................................................................. 24

8.1 LCM Outline Dimension................................................................................................................................ 24

9. Shipping and Package..................................................................................................... 26

9.1 Shipping Label Format.................................................................................................................................. 26

9.2 Carton Package ............................................................................................................................................. 27

9.3 Shipping package of palletizing sequence ................................................................................................. 27

10. Appendix ...................................................................................................................... 28

10.1 EDID description.......................................................................................................................................... 28

10.1 IIS description.............................................................................................................................................. 31

B101EW01 V2 document version : 2.0

2 of 38

No Preview Available !

www.DataSheet4U.net

Product Specification

AU OPTRONICS CORPORATION

Record of Revision

Version and Date Page

Old description

0.1 2009/04/15 All First Edition for Customer

0.2 2009/04/27 22

0.3 2009/05/07 21 Clock frequency max 90MHz

26 HW control table [Radium IC]

27 Carton Package (1 layer)

28~31

0.4 2009/05/18 21 Clock Frequency 62.18 MHz

26 Shipping Label Format

32~39

1.0 2009/06/04 23~24

27~29

1.1 2009/07/20 15 PWM duty ratio min 5%

21~22 Panel power sequency

2.0 2009/07/23 5~6 Response time 16ms typ

New Description

Update timing drawing

Clock frequency max 80MHz

HW control table [Novatek IC]

Carton Package (2 layer)

Update EDID

Clock Frequency 61.5 MHz

Add Lenovo barcode information

Add Appendix IIS description

2D drawing update

EDID update

PWM duty ratio min 1% (remark

frequency <5KHz)

Update timing drawing and setting

Response time 16ms typ / 32ms max

Remark

B101EW01 V2 document version : 2.0

3 of 38

No Preview Available !

www.DataSheet4U.net

Product Specification

AU OPTRONICS CORPORATION

1. Handling Precautions

1) Since front polarizer is easily damaged, pay attention not to scratch it.

2) Be sure to turn off power supply when inserting or disconnecting from input connector.

3) Wipe off water drop immediately. Long contact with water may cause discoloration or

spots.

4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.

5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard

surface.

6) Since CMOS LSI is used in this module, take care of static electricity and insure

human earth when handling.

7) Do not open nor modify the Module Assembly.

8) Do not press the reflector sheet at the back of the module to any directions.

9) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor

tilt the Interface Connector of the TFT Module.

11) After installation of the TFT Module into an enclosure (Notebook PC Bezel, for

example), do not twist nor bend the TFT Module even momentary. At designing the

enclosure, it should be taken into consideration that no bending/twisting forces are

applied to the TFT Module from outside. Otherwise the TFT Module may be

damaged.

12)Small amount of materials having no flammability grade is used in the LCD module. The

LCD module should be supplied by power complied with requirements of Limited Power

Source (IEC60950 or UL1950), or be applied exemption.

13)Disconnecting power supply before handling LCD modules, it can prevent electric shock, DO

NOT TOUCH the electrode parts, cables, connectors and LED circuit part of TFT module

that a LED light bar build in as a light source of back light unit. It can prevent electrostatic

breakdown.

B101EW01 V2 document version : 2.0

4 of 38

No Preview Available !

www.DataSheet4U.net

Product Specification

AU OPTRONICS CORPORATION

2. General Description

B101EW01 V2 is a Color Active Matrix Liquid Crystal Display composed of a TFT LCD panel, a

driver circuit, and LED backlight system. The screen format is intended to support 1280(H) x

720(V) screen and 262k colors (RGB 6-bits data driver) with LED backlight driving circuit. All

input signals are LVDS interface compatible.

B101EW01 V2 is designed for a display unit of notebook style personal computer and industrial

machine.

2.1 General Specification

℃The following items are characteristics summary on the table at 25 condition:

Items

Screen Diagonal

Active Area

Pixels H x V

Pixel Pitch

Pixel Arrangement

Display Mode

White Luminance

Note: ILED is LED current

Luminance Uniformity (5P)

Contrast Ratio

Response Time

Nominal Input Voltage VDD

Power Consumption

Weight

Physical Size

(w/ bracket & PCBA)

Electrical Interface

Unit

[mm]

Specifications

255.54(10.1W”)

222.72(H) X 125.28(V)

1280x3(RGB) x 720

[mm] 0.1740 (H) x 0.1740 (V)

R.G.B. Vertical Stripe

[cd/m2]

Normally White

180 typ

(Note1)

1.25 max

[ms]

[Volt]

500 typ

16 typ, 32ms max

+3.3 typ.

[Watt]

[Grams]

[mm]

Typ Max

2.7W

2.9W

3.1W

3.3W

@ Black pattern

175 max.

Max

Typical

Min

233.5

233.0

232.5

1 channel LVDS

Note

Type I , Vin =12V

Type I , Vin =5V

147

146.5

146.0

3.6

B101EW01 V2 document version : 2.0

5 of 38