B1140.pdf 데이터시트 (총 4 페이지) - 파일 다운로드 B1140 데이타시트 다운로드

No Preview Available !

www.DataSheet4U.net
Ordering number:ENN2069A
PNP Epitaxial Planar Silicon Transistor
2SB1140
20V/5A Switching Applications
Applications
· Strobes, power supplies, relay drivers, lamp drivers.
Features
· Adoption of FBET, MBIT processes.
· Low saturation voltage.
· Large current capacity.
· Short switching time.
Package Dimensions
unit:mm
2042B
[2SB1140]
8.0
4.0
1.0 1.0
3.3
3.0
1.6
0.8
0.8
0.75 0.7
123
Specifications
Absolute Maximum Ratings at Ta = 25˚C
Parameter
Collector-to-Base Voltage
Collector-to-Emitter Voltage
Emitter-to-Base Voltage
Collector Current
Collector Current (Pulse)
Base Current
Symbol
VCBO
VCEO
VEBO
IC
ICP
IB
Collector Dissipation
PC
Junction Temperature
Storage Temperature
Tj
Tstg
Electrical Characteristics at Ta = 25˚C
Tc=25˚C
2.4
4.8
Conditions
Parameter
Symbol
Conditions
Collector Cutoff Current
ICBO
Emitter Cutoff Current
IEBO
DC Current Gain
hFE1
hFE2
Gain-Bandwidth Product
fT
* : The 2SB1140 is classified by 500mA hFE as follows :
VCB=20V, IE=0
VEB=4V, IC=0
VCE=2V, IC=500mA
VCE=2V, IC=4A
VCE=5V, IC=200mA
Rank
hFE
RST
100 to 200 140 to 280 200 to 400
1 : Emitter
2 : Collector
3 : Base
SANYO : TO-126ML
Ratings
25
20
5
5
8
0.5
1.5
10
150
55 to +150
Unit
V
V
V
A
A
A
W
W
˚C
˚C
Ratings
min typ max
Unit
500 nA
500 nA
100*
400*
60
320 MHz
Continued on next page.
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
O2003TN (KOTO)/92098HA (KT)/4017KI/D176TA No.2069–1/4

No Preview Available !

www.DataSheet4U.net
Continued from preceding page.
Parameter
Output Capacitance
Collector-to-Emitter Saturation Voltage
Base-to-Emitter Saturation Voltage
Collector-to-Base Breakdown Voltage
Collector-to-Emitter Breakdown Voltage
Emitter-to-Base Breakdown Voltage
Turn-ON Time
Storage Time
Fall Time
2SB1140
Symbol
Conditions
Cob
VCE(sat)
VBE(sat)
V(BR)CBO
V(BR)CEO
V(BR)EBO
ton
tstg
tf
VCB=10V, f=1MHz
IC=3A, IB=60mA
IC=3A, IB=60mA
IC=()10µA, IE=0
IC=()1mA, RBE=
IE=()10µA, IC=0
See specified Test Circuti.
See specified Test Circuit.
See specified Test Circuit.
Switching Time Test Circuit
PW=20µs
D.C.1%
IB1
IB2
OUTPUT
INPUT
VR
50
RB
+
100µF
RL
5
+
470µF
VBE=5V
VCC= --10V
IC=10IB1= --10IB2=--2A
(For PNP, the polarity is reversed.)
Ratings
min typ
60
250
1.0
25
20
5
40
200
10
max
500
1.3
Unit
pF
mV
V
V
V
V
ns
ns
ns
--5
From top
--100mA
--90mA
--4 --80mA
--70mA
--60mA
--3
IC -- VCE
--50mA
--40mA
--30mA
--20mA
--2
--10mA
--1
0 IB=0
0 --0.2 --0.4 --0.6 --0.8 --1.0
Collector-to-Emitter Voltage, VCE – V ITR09005
IC -- VBE
--6
VCE= --2V
--5
--4
--3
--2
--1
0
0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 --1.4
Base-to-Emitter Voltage, VBE – V ITR09007
IC -- VCE
--5
--40mA --35mA
--4 --30mA
--25mA
--20mA
--3
--15mA
--2 --10mA
--1 --5mA
0
0
1000
7
5
3
2
IB=0
--1 --2 --3 --4 --5
Collector-to-Emitter Voltage, VCE – V ITR09006
hFE -- IC
VCE= --2V
Ta=75°C
25°C
--25°C
100
7
5
3
2
7--0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10
Collector Current, IC – A
ITR09008
No.2069–2/4

No Preview Available !

www.DataSheet4U.net
2SB1140
fT -- IC
Cob -- VCB
1000
3
VCE= --5V
f=1MHz
72
5
3 100
7
2
5
100 3
7
2
5
3
7--0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10
Collector Current, IC – A
ITR09009
--1000
7
VCE(sat) -- IC
IC / IB=50
5
3
2
--100
7
5
3
2
25°C Ta= --25°C
75°C
--10
7--0.01 2 3
2
5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10
Collector Current, IC – A
ITR09011
ASO
--10 ICP=–8A
7
5
IC=–5A
3
2
--1.0
7
5
3
2
DC 100ms10ms
DC operation oTpae=ra2t5io°nCTc=25°C
--0.1 Ta=25°C
7
5
Single pulse
23
5 7 --1.0
23
5 7 --10
23
Collector-to-Emitter Voltage, VCE – V ITR09013
10
3 5 7 --1.0
23
5 7 --10
23
Collector-to-Base Voltage, VCB -- V ITR09010
VBE(sat) -- IC
--10
IC / IB=50
7
5
3
2
--1.0 Ta= --25°C 25°C
7
5 75°C
3
7--0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10
Collector Current, IC – A
ITR09012
PC -- Ta
12
10
8
6
4
2
1.5
No heat sink
0
0 20 40 60 80 100 120 140 160
Ambient Temperature, Ta – ˚C ITR09014
No.2069–3/4

No Preview Available !

www.DataSheet4U.net
2SB1140
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of October, 2003. Specifications and information herein are subject
to change without notice.
PS No.2069–4/4