T103J6xxxxx.pdf 데이터시트 (총 6 페이지) - 파일 다운로드 T103J6xxxxx 데이타시트 다운로드

No Preview Available !

www.DataSheet4U.net
C&K T Series
Subminiature Rocker Switches
Features/Benefits
Compact size—small footprint
Single and double pole models
PC and panel mounting options available
RoHS compliant
Typical Applications
Telecommunications
Instrumentation
Medical Equipment
Models Available
Specifications
CONTACT RATING: Q contact material (TX01 models): 3 AMPS @
120 V AC or 28 V DC. All other models: 2 AMPS @ 120 V AC or
28 V DC. See page H-53 for additional ratings.
ELECTRICAL LIFE: TX01 models: 60,000 make-and-break
cycles at full load. All other models: 30,000 cycles.
CONTACT RESISTANCE: Below 20 m typ. initial @
2–4 V DC, 100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 109 min.
DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 85ºC.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
NOTE: Any models supplied with Q, B or G contact material are RoHS compliant.
For the latest information regarding RoHS compliance, please go to:
www.ittcannon.com/rohs.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Materials
CASE: Glass filled nylon 6/6, flame retardant, heat stabilized or
diallyl phthalate (DAP), (UL 94V-0).
ACTUATOR: Nylon, black standard.
BUSHING: Brass, nickel plated.
HOUSING: Stainless steel.
SWITCH SUPPORT: Brass, matte-tin plated.
MOUNTING BRACKET: Stainless steel.
END CONTACTS: B contact material: Copper alloy, with gold plate
over nickel plate. Q contact material: Coin silver, silver plated.
See page H-53 for additional contact materials.
CENTER CONTACTS & TERMINALS: B contact material: Copper alloy,
with gold plate over nickel plate. Q contact material: Copper alloy,
silver plated. See page H-53 for additional contact materials.
TERMINAL SEAL: Epoxy.
HARDWARE: Nut, Screws & Lockwasher: Stainless steel.
Standoff: Nylon standard.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown
and described on pages H-47 through H-52. For additional options not shown in catalog, consult Customer Service Center.
All models have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods.
Switch Function
T101 SP On-None-On
T102 SP Off-None-On
T103 SP On-Off-On
T105 SP Mom.-Off-Mom.
T107 SP On-Off-Mom.
T201 DP On-None-On
T205 DP Mom.-Off-Mom.
Actuator
J1 Rocker, .300" wide
J6 Rocker, .230" wide
Terminations
A Right angle, PC thru-hole
AV Vertical Right angle, PC thru-hole
Z Solder lug
V3 V-bracket
Contact Material
B Gold
K Gold, tin-lead
P Gold, matte-tin
Q Silver
G Gold over silver
Seal
E Epoxy
Actuator Color
2 Black
H Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H–47
www.ittcannon.com

No Preview Available !

www.DataSheet4U.net
SWITCH FUNCTION
C&K T Series
Subminiature Rocker Switches
ACTUATOR COLOR
SWITCH FUNCTION
POS. 1
POS. 2
POS. 3
CONNECTED TERMINALS
POS. 1
POS. 2
POS. 3
NO.
POLES
SP
SPDT
MODEL
NO.
T101
T103
T105
T107
T102
C&K marking on opposite side
ON
ON
MOM.
ON
OFF
NONE
OFF
OFF
OFF
NONE
ON
ON
MOM.
MOM.
ON
C&K marking on opposite side
N/A
2-3 2-1
OPEN
OPEN
N/A
3-1
SPDT
SPST
SCHEMATIC
PANEL MOUNTING
Part number shown: T101J1ZBE2
T201
ON
DP
T205
MOM.
NONE
ON
OFF MOM.
DPDT
Terminal Nos.
For Reference Only
N/A
2-3,5-6
OPEN
2-1,5-4
DPDT
PANEL MOUNTING
Part number shown: T201J1ZBE2
MOM. = Momentary
All models
with all options when ordered with G or Q contact material.
Terminal Nos.
For Reference Only
H–48
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
H

No Preview Available !

www.DataSheet4U.net
C&K T Series
Subminiature Rocker Switches
ACTUATOR
J1 ROCKER, .300 WIDE
ACTUATOR
Standard with all models except T10X with A terminations.
J6 ROCKER, .230 WIDE
OPTION
CODE
ACTUATOR
COLOR
2 BLACK
Actuators available separately, see page H 51-
H53. Finish: Matte. Other colors, custom actu-
ator markings and legends available, consult
Customer Service Center.
Standard with T10X model with A terminations.
TERMINATIONS
Z SOLDER LUG
SP
DP
A RIGHT ANGLE, PC THRU-HOLE
SP and DP
Not available with K or P contact material.
PC MOUNTING
T101J6ABE2
Horizontal Actuation
SPDT
Not available with T102 model. J6 actuator standard only
on T10X models with A terminations.
H Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H–49
www.ittcannon.com

No Preview Available !

www.DataSheet4U.net
A RIGHT ANGLE, PC THRU-HOLE
TERMINATIONS
C&K T Series
Subminiature Rocker Switches
T201J1ABE2
Horizontal Actuation
DPDT
AV VERTICAL RIGHT ANGLE, PC THRU-HOLE
T101J1AVBE2
Vertical Actuation
SPDT
AV VERTICAL RIGHT ANGLE, PC THRU-HOLE
NOTE: Terminal bend radii and lead-in manufacturing option.
T201J1AVBE2
Vertical Actuation
DPDT
V3 VERTICAL MOUNT, V-BRACKET
T101J1V3BE2
SPDT
NOTE: Terminal bend radii and lead-in manufacturing option.
H–50
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
H

No Preview Available !

www.DataSheet4U.net
C&K T Series
Subminiature Rocker Switches
TERMINATIONS
V3 VERTICAL MOUNT, V-BRACKET
T201J1V3BE2
DPDT
CONTACT MATERIAL
OPTION
CODE
B
K
P
RoHS
RoHS
COMPLIANT * COMPATIBLE *
YES YES
NO YES
YES YES
Q YES YES
CONTACT
MATERIAL
GOLD 3
SILVER 4,5
TERMINAL
PLATING
GOLD 1
TIN-LEAD 6
MATTE-TIN 7
SILVER 5
RATINGS
LOW LEVEL/
DRY CIRCUIT
0.4 VA MAX. @ 20 V AC OR DC MAX.
POWER
TX01 MODELS: 3 AMPS @ 120 V AC OR 28 V DC.
ALL OTHER MODELS: 2 AMPS @ 120 V AC OR 28 V DC.
TX01 MODELS: 0.4 VA MAX @ 20 V AC OR DC MAX. OR
G
YES
YES
GOLD OVER
SILVER 2,3
GOLD 3
LOW LEVEL/DRY
CIRCUIT OR POWER
3 AMPS @ 120 V AC OR 28 V DC.
ALL OTHER MODELS: 0.4 VA MAX @ 20 V AC OR DC MAX. OR
2 AMPS @ 120 V AC OR 28 V DC.
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.
2 END CONTACTS: Coin silver, with gold plate over nickel plate.
3 CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate
over nickel plate.
4 END CONTACTS: Coin silver, silver plated.
5 CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated.
6 TERMINALS: Copper alloy, with tin-lead alloy over nickel plate.
7 TERMINALS: Copper alloy, with matte-tin over nickel plate.
NOTE: Any models supplied with Q, B, G & P contact material are RoHS compliant.
For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.
All models
with all options when ordered with G, or Q contact material.
B contact material standard with A, AV, V3 terminations.
Q contact material standard with C & Z terminations.
K & P contact materials not available with Z terminations.
E EPOXY SEAL
SEAL
H Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H–51
www.ittcannon.com