G121X1-L02.pdf 데이터시트 (총 25 페이지) - 파일 다운로드 G121X1-L02 데이타시트 다운로드

No Preview Available !

www.DataSheet.co.kr
Issued Date: July. 2, 2008
Model No.: G121X1-L02
Preliminary
TFT LCD Preliminary Specification
MODEL NO.: G121X1-L02
Customer:
Approved by:
Note:
FOR MORE INFORMATION:
AZ DISPLAYS, INC.
75 COLUMBIA, ALISO VIEJO, CA 92656
Http://www.AZDISPLAYS.com
Liquid Crystal Display Division
QRA Division.
OA Head Division.
Approval
Approval
1 / 25
Version 1.0
Datasheet pdf - http://www.DataSheet4U.net/

No Preview Available !

www.DataSheet.co.kr
Issued Date: July. 2, 2008
Model No.: G121X1-L02
Preliminary
- CONTENTS -
REVISION HISTORY
-------------------------------------------------------
1. GENERAL DESCRIPTION
1.1 OVERVIEW
1.2 FEATURES
1.3 APPLICATION
1.4 GENERAL SPECIFICATIONS
1.5 MECHANICAL SPECIFICATIONS
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
2.2 ELECTRICAL ABSOLUTE RATINGS
2.2.1 TFT LCD MODULE
2.2.2 BACKLIGHT UNIT
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE
3.2 BACKLIGHT UNIT
4. BLOCK DIAGRAM
4.1 TFT LCD MODULE
4.2 BACKLIGHT UNIT
5. INPUT TERMINAL PIN ASSIGNMENT
5.1 TFT LCD MODULE
5.2 BACKLIGHT UNIT
5.3 TIMING DIAGRAM OF LVDS INPUT SIGNAL
5.4 COLOR DATA INPUT ASSIGNMENT
6. INTERFACE TIMING
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
6.2 POWER ON/OFF SEQUENCE
7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS
7.2 OPTICAL SPECIFICATIONS
8. PACKAGING
8.1 PACKING SPECIFICATIONS
8.2 PACKING METHOD
9. DEFINITION OF LABELS
10. PRECAUTIONS
10.1 ASSEMBLY AND HANDLING PRECAUTIONS
10.2 SAFETY PRECAUTIONS
-------------------------------------------------------
-------------------------------------------------------
-------------------------------------------------------
-------------------------------------------------------
-------------------------------------------------------
-------------------------------------------------------
-------------------------------------------------------
-------------------------------------------------------
-------------------------------------------------------
-------------------------------------------------------
11. MECHANICAL CHARACTERISTICS
-------------------------------------------------------
3
4
6
7
11
12
14
16
20
22
23
24
2 / 25
Version 1.0
Datasheet pdf - http://www.DataSheet4U.net/

No Preview Available !

www.DataSheet.co.kr
REVISION HISTORY
Version
Date
Section
Description
1.0 July. 2.2008 All G121X1-L02 Preliminary SPEC was first issued
Issued Date: July. 2, 2008
Model No.: G121X1-L02
Preliminary
3 / 25
Version 1.0
Datasheet pdf - http://www.DataSheet4U.net/

No Preview Available !

www.DataSheet.co.kr
Issued Date: July. 2, 2008
Model No.: G121X1-L02
Preliminary
1. GENERAL DESCRIPTION
1.1 OVERVIEW
The G121X1-L02 model is a 12.1” TFT-LCD module with a 2-CCFL Backlight Unit and a 20-pin
1ch-LVDS interface. This module supports 1024 x 768 XGA mode and displays 262,144 colors. The
inverter module for the Backlight Unit is not built in.
1.2 FEATURES
- Wide viewing angle
- High contrast ratio
- Fast response time
- XGA (1024 x 768 pixels) resolution
- Wide operating temperature
- DE (Data Enable) mode
- LVDS (Low Voltage Differential Signaling) interface
- RoHS Compliance
- Lamp Replaceable
- Sunlight Readable
1.3 APPLICATION
- TFT LCD Monitor
- TFT LCD TV
- Industrial Application
- Amusement
- Vehicle
1.4 GENERAL SPECIFICATI0NS
Item
Diagonal Size
Active Area
Bezel Opening Area
Driver Element
Pixel Number
Pixel Pitch
Pixel Arrangement
Display Colors
Transmissive Mode
Surface Treatment
Specification
12.1
245.76(H) x 184.32(V)
249.0 x 187.5
a-si TFT active matrix
1024 x R.G.B. x 768
0.240(H) x 0.240(V)
RGB vertical stripe
262,144
Normally white
Hard coating (3H), Glare
Unit
inch
mm
mm
-
pixel
mm
-
color
-
-
Note
(1)
-
-
-
-
-
-
-
4 / 25
Version 1.0
Datasheet pdf - http://www.DataSheet4U.net/

No Preview Available !

www.DataSheet.co.kr
Issued Date: July. 2, 2008
Model No.: G121X1-L02
Preliminary
1.5 MECHANICAL SPECIFICATIONS
Item
Horizontal (H)
Module Size Vertical (V)
Depth (D)
Weight
I/F connector mounting
position
Min. Typ. Max.
260.2
260.5
260.8
203.7 204 204.3
(12.15)
(12.45)
(12.75)
(700)
The mounting inclination of the connector makes
the screen center within ±0.5mm as the horizontal.
Unit
mm
mm
mm
g
-
Note
(1)
-
(2)
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
(2) Connector mounting position
+/- 0.5mm
5 / 25
Version 1.0
Datasheet pdf - http://www.DataSheet4U.net/