LV7109E.pdf 데이터시트 (총 24 페이지) - 파일 다운로드 LV7109E 데이타시트 다운로드

No Preview Available !

www.DataSheet.co.kr
Ordering number : ENA1992
LV7109E
Bi-CMOS IC
AC Switch
Europe SCART Standard
Overview
The LV7109E is a rationalized IC of AC switch LV7108 complying with the Europe SCART standard.
Features and functions
Video/Audio Canal-SW
6dB-VideoAmp
6MHz/12MHz/27MHz-LowPassFilter
9ch VideoDriver (AV1/AV2/Line/RGB/Component)
V-Sync. Detection
3ch Stereo Audio Input
2ch Stereo Audio Output
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Maximum supply voltage 1
Maximum supply voltage 2
Recommended supply voltage 1
Recommended supply voltage 2
Operating supply range 1
Operating supply range 2
Allowable power dissipation
VCC1 max
VCC2 max
VCC1
VCC2
VCC1 opg
VCC2 opg
Pd max
* With specified substrate
Operating temperature
Topr
Storage temperature
Tstg
* With specified substrate : 76.1mm × 114.3mm × 1.6mm, glass epoxy.
Ratings
6.0
13.0
5.0
12.0
4.5 to 5.3
11.1 to 12.5
1070
-20 to +75
-40 to +150
Unit
V
V
V
V
V
V
mW
°C
°C
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment. The products mentioned herein
shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life,
aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system,
safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives
in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any
guarantee thereof. If you should intend to use our products for new introduction or other application different
from current conditions on the usage of automotive device, communication device, office equipment, industrial
equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the
intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely
responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
N1611 SY PC 20110207-S00003 No.A1992-1/24
Datasheet pdf - http://www.DataSheet4U.net/

No Preview Available !

www.DataSheet.co.kr
LV7109E
Electrical Characteristics at Ta = 25°C, VCCV = 5.0V, VCCA = 12V
Parameter
Symbol
Input
point
Output
point
Test condition
Current dissipation 1 (5V)
Current dissipation 2
(ALL5V)
Current dissipation 3
(12V)
Video Canal SW part
ICC1
ICC2
ICC3
Non-signal
Non-signal
Non-signal
Output voltage 1
VDCC
AV1, AV2-OUT (Sync tip)
Voltage gain
Frequency characteristics 1
VGC
VFC1
Frequency characteristics 2 VFC2
DG Differential gain
DP Differential phase
Cross talk between channel
DGC
DPC
CTC
Picture S/N
Maximum output level 1
VSNC
VOMAXC1
17
38
40
19
38
40
17
19
Maximum output level 2
VOMAXC2
38
40
Video INPUT SW part
VIN = 1Vp-p, f = 100kHz, AV1, AV2-OUT
VIN = 1Vp-p, f = 10MHz/100kHz
12 (P17, P19: Through)
VIN = 1Vp-p, f = 6MHz/100kHz
(P38, P40: 6MHz-LPF)
VIN = Video : 1Vp-p
14 VIN = Video : 1Vp-p
Selected input = GND
Non-selected input = 1Vp-p, f = 4.43MHz
VIN = Video (50%White)
12 Output level (Trough output) whose
14 linearity exceeds 1%
VIN = Linearity (lamp) signal
Output level at linearity 1%
12 Output level (ENC output) whose linearity
14 exceeds 1%
VIN = Linearity (lamp) signal
Output level at linearity 1%
Output voltage 1
VDCI1
17, 19, 21 35
Composite (Sync-Tip)
Output voltage 2
VDCI2
17, 19, 21 35
Y (Sync-Tip)
Output voltage 3
VDCI3
3 33 Chroma (Center)
Voltage gain 1
Frequency characteristics
DG Differential Gain
DP Differential Phase
Cross talk between channel
Picture S/N
Maximum output level
VGI1
VFI
DGSW
17, 19, 21
3
17, 19, 21
3
17, 19, 21
DPSW
17, 19, 21
CTAD
VSNC
17, 19, 21
3
17, 19, 21
VOMAXSW 17, 19, 21
33
35
33
35
35
35
33
35
35
35
Video Driver part
VIN = 1Vp-p, f = 100kHz, load = 10kΩ
VIN = 1Vp-p, f = 10MHz/100kHz
VIN = Video :1Vp-p
VIN = Video :1Vp-p
Selected input = GND
Non-selected input = 1Vp-p, f = 4.43MHz
VIN = Video (50%White)
Output level (ENC output) whose linearity
exceeds 1%
VIN = Linearity (lamp) signal
Output level at linearity 1%
Output voltage 1
Output voltage 2
Output voltage 3
Output voltage 4
VDCD1
VDCD2
VDCD3
VDCD4
64, 46
1, 44
3, 42
40
3
46
42
40
6 RGB (Pedestal)
8
10
16 CVBS (Sync tip)
27 Y (Sync tip)
10 C, Pr, Pb (Center)
23
25
27 Y (Sync tip)
Voltage gain 1
VGD1
64, 46
1, 44
3, 42
40, 38
6, 23
8, 27
10, 25
12, 14, 16
For VIN = 1Vp-p and f = 100kHz Line
output only: 2 drives, Other outputs: 1drive
Ratings
min typ
69.7 82.0
11.1 13.0
max
94.3
15.0
Unit
mA
mA
7.7 9.0 10.4 mA
0.5 0.7 0.9 V
5.5 6.0 6.5 dB
-1.0 0.0 +1.0 dB
-1.5 0.0 +1.5 dB
-1 0 +1 %
-1.5 0 +1.5 °C
-60 -50 dB
-70 -65 dB
2.8 3.0
Vp-p
2.6 2.7
Vp-p
0.8 1.0 1.2 V
0.8 1.0 1.2 V
1.8 2.1 2.4 V
-0.5 0.0 +0.5 dB
-1.0 0.0 +1.0 dB
-1 0 +1 %
-1.5 0 +1.5 °C
-60 -50 dB
-66 -60 dB
1.8 2.0
Vp-p
0.6 0.8 1.0 V
0.5 0.7 0.9 V
1.7 2.0 2.3 V
0.8 1.0 1.2 V
5.5 6.0 6.5 dB
Continued on next page.
No.A1992-2/24
Datasheet pdf - http://www.DataSheet4U.net/

No Preview Available !

www.DataSheet.co.kr
LV7109E
Continued from preceding page.
Parameter
Frequency characteristics 1
Frequency characteristics 2
Frequency characteristics 3
Frequency characteristics 4
Frequency characteristics 5
Frequency characteristics 6
Frequency characteristics 7
Frequency characteristics 8
Group delay 1
Group delay 2
Group delay 3
Group delay 4
Mute attenuation
DG Differential gain
DP Differential phase
Cross talk between channel
Picture S/N
Maximum output level 1
Maximum output level 2
Maximum output level 3
Sync-SEP part
V.SYNC output
High voltage
V.SYNC output
Low voltage
V.SYNC output
delay time
V.SYNC output
pulse width
Note 2) When pin 10 is open
Symbol
VFD1
VFD2
VFD3
VFD4
VFD5
VFD6
VFD7
VFD8
VGDD1
VGDD2
VGDD3
VGDD4
VMUD
DG1
DP1
CTD
VSND
VOMAXD1
VOMAXD2
VOMAXD3
VVSH
VVSL
TDVS
TWVS
Input
point
Output
point
Test condition
46, 44, 42 6, 8, 10
40, 38 23, 27, 25
12, 14 16
46 6
44 8
42 10
46 23
44 27
42 25
46 23
44 27
42 25
46 23
42 25
46 23
42 25
44 27
44 27
46, 44, 42 6, 8, 10
40, 38 23, 27, 25
12, 14 16
46 23
44 27
42 25
46 23
42 25
44 27
ALL
ALL
ALL
ALL
64, 46
1, 44
3, 42
ALL
6
8
10
40 16
27
46 23
42 25
VIN = 1Vp-p, f = 6MHz/100kHz when
6MHzLPF is selected
f = 27MHz/100kHz when 6MHzLPF is
selected
f = 12MHz/100kHz when 12MHzLPF is
selected
f = 54MHz/100kHz when 12MHzLPF is
selected
f = 13.5MHz/100kHz when 13.5MHzLPF
is selected
f = 74MHz/100kHz when 13.5MHzLPF is
selected
f = 25MHz/100kHz when 27MHzLPF is
selected
f = 74MHz/100kHz when 27MHzLPF is
selected
f = 6MHz/100kHz when 6MHzLPF is
selected
f = 12MHz/100kHz when 12MHzLPF is
selected
f = 27MHz/100kHz when 13.5MHzLPF is
selected
f = 27MHz/100kHz when 27MHzLPF is
selected
VIN = 1Vp-p, f=4.43MHz
VIN = Video : 1Vp-p
VIN = Video : 1Vp-p
VIN = 1Vp-p, f=4.43MHz
Driver output terminated with 75Ω
VIN = Video (50%White)
Output level (RGB) whose linearity
exceeds 1%
VIN = Linearity (lamp) signal
Output level at linearity 1%
Output level (brightness, CVBS) whose
linearity exceeds 1%
VIN = Linearity (lamp) signal
Output level at linearity 1%
Output level (color difference) whose
linearity exceeds 1%
VIN = sin 10kHz
Output level at linearity 1%
17, 19, 21 34
17, 19, 21 34
17, 19, 21 34
17, 19, 21 34
Note 2)
VIN = PAL Video : 1Vp-p
Note 2)
Ratings
min typ
-1.5 0.0
max
+1.5
Unit
dB
-35 -25 dB
-1.5 0.0 +1.5 dB
-40 -30 dB
-1.5 0.0 +1.5 dB
-40 -30 dB
-1.5 0.0 +1.5 dB
-40 -30 dB
20 35 ns
14 25 ns
10 18 ns
10 18 ns
-60 -50 dB
-1 0 +1 %
-1.5 0 +1.5 °C
-60 -50 dB
-70 -65 dB
2.5 2.7
Vp-p
2.6 2.8
Vp-p
2.0 2.5
Vp-p
4.3 4.7 5.0 V
0.0 0.3 0.6 V
7 15 25 μs
125 155 185 μs
Continued on next page.
No.A1992-3/24
Datasheet pdf - http://www.DataSheet4U.net/

No Preview Available !

www.DataSheet.co.kr
LV7109E
Continued from preceding page.
Parameter
Symbol
Audio canal switches part
Maximum output level
VOMAXC
Channel balance
Total harmonic distortion
Output noise voltage
Mute attenuation
CVSW
THDAC
VNAC
VMUAC
Input impedance
Cross talk between channel
and selctors
Output off set voltage
ZIN
CTSW
VOFSET
External control part
I2C-BUS High level input
voltage
I2C-BUS Low level input
voltage
FSS output H voltage
VIH
VIL
VHFSS
FSS output M voltage
VMFSS
FSS output L voltage
VLFSS
FSS risinge time
FB output H voltage
TFSSLH
VHFB
FB output L voltage
VLFB
FB external control L range VLFBIN
FB external control H range VHFBIN
External control output H
voltage
External control output L
voltage
Internal reference regulator
VEXTH
VEXTL
REG2.5V
VREG25
REG9.0V
VREG90
VRE4.5
VREG45
Input
point
Output
point
Test condition
R-Ch. R-Ch.
49, 50, 51 58, 61
L-Ch.
L-Ch.
54, 55, 56 59, 62
AV1, AV2-OUT (L, R)
Output level at f = 1kHz, THD = 1%
BW = 400 to 30kHz
VIN = 2Vrms, f = 1kHz
Lch Gain-Rch Gain
VIN = 2Vrms, f = 1kHz,
BW = 400 to 30kHz
Rg = 0Ω, BW = JIS-A
VIN = 2Vrms, f = 1kHz, BW = JIS-A
20log (VOUT/VIN)
VIN = 2Vrms, f = 1kHz
Rg = 0Ω, BW = JIS-A
Off set voltage at the time of
changeover SW.
36
37
36
37
7 Serial control select FSS OUT H,
load = 10kΩ
external output resistor 470 recommended
7 Serial control select FSS OUT M,
load = 10kΩ
external output resistor 470 recommended
7 Serial control select FSS OUT,
load = 10kΩ
7
18 Serial control select FB OUT H,
load = 150Ω
18 Serial control select FB OUT L,
load = 150Ω
20 18 Pin 20 input voltage range at
which the pin 18 output becomes “L”.
20 18 Pin 20 input voltage range at
which the pin 18 output becomes “H”.
26 2kΩ load for data 1
26 2kΩ load for data 0
2
31
52
57
48
Ratings
min typ max
Unit
2.2 2.5
Vrms
-1.5 0.0 +1.5 dB
0.003 0.01 %
-100
-90
-80 dBV
-75 dB
80 100
-110
-20 0
120 kΩ
-80 dB
+20 mV
2.5
GND
VCC5
0.8
V
V
10.6 11.1 11.6 V
5.5 6.3 7.0 V
0.0 0.1 0.5 V
1.0 ms
3.0 4.0 5.0 V
0.0 0.2 0.4 V
0.0 0.5 V
1.0 3.0 V
4.0 4.5 5.0 V
0.0 0.3 1.0 V
2.3 2.5 2.7 V
8.7 9.0 9.3 V
4.3 4.5 4.7 V
No.A1992-4/24
Datasheet pdf - http://www.DataSheet4U.net/

No Preview Available !

www.DataSheet.co.kr
Package Dimensions
unit : mm (typ)
3159A
48
49
17.2
14.0
33
32
LV7109E
64
1
(1.0)
0.8
17
16
0.35
0.15
SANYO : QIP64E(14X14)
AudioPower Supply Block Diagram
REG9V_AR
52
REF4.5V
48
VCC12V_A
29
A-DAC_R_IN AV2_R_IN
49 50
AV1_R_IN
51
9V-Reg.
R-ch Circuit
Power Supply
100kΩ
Buf.
R-ch
100kΩ
100kΩ
Input Bias
Buffer
Switch
Buf.
4.5V-Ref.
Buf.
R-ch
Output Ref.
Switch
Buf.
Mute
AV2_R_OUT
58
Mute
AV1_R_OUT
61
VCC5V_ALL
28 Power Mute
REG9V_AL
57
9V-Reg.
L-ch Circuit
Power Supply
AV2_L_OUT
Switch Buf. Mute 59
Buf.
L-ch
Output Ref.
100kΩ
Buf.
L-ch
100kΩ
100kΩ
Input Bias
Buffer
AV1_L_OUT
Switch Buf. Mute 62
54 55
A-DAC_L_IN AV2_L_IN
56
AV1_L_IN
No.A1992-5/24
Datasheet pdf - http://www.DataSheet4U.net/