LV7150V.pdf 데이터시트 (총 7 페이지) - 파일 다운로드 LV7150V 데이타시트 다운로드

No Preview Available !

www.DataSheet.co.kr
Ordering number : ENA0896A
LV7150V
Bi-CMOS IC
Switch for the Wideband Video Signal (with LPF)
Overview
The LV7150V is switch for the wideband video signal. It has the two input switches by three channels.
It built in the 6MHz/12MHz/30MHz-LPF. It is the best for the filter to remove the digital clock noise of the Y/Pb/Pr or
RGB Analog video signal before the A/D converter.
It can correspond to the full HD signal because it provides the flat frequency response to 60MHz.
Functions
Two input switches × three channels
Y/Pb/Pr and RGB signal inputs
Flat frequency response to 60MHz (Bypass filter)
6MHz/12MHz/30MHz-LPF
Specifications
Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Maximum supply voltage
Allowable power dissipation
VCC max
Pd max
Ta75°C Mounted on a specified board *
Operating temperature
Topr
Storage temperature
Tstg
Note *: Mounted on a specified board: 114.3mm×76.1mm×1.6mm glass epoxy
Ratings
6
300
-20 to +75
-40 to +125
Unit
V
mW
°C
°C
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
D1907 TI IM 20071127-S00006 / 72507 TI IM No.A0896-1/7
Datasheet pdf - http://www.DataSheet4U.net/

No Preview Available !

www.DataSheet.co.kr
LV7150V
Recommended Operating Conditions at Ta = 25°C
Parameter
Recommended supply voltage
Operating supply voltage Range
Symbol
VCC
VCC opg
Conditions
Ratings
5
4.75 to 5.25
Unit
V
V
Electrical Characteristics at Ta = 25°C, VCC = 5.0V
Parameter
Input
Input signal
Out
Point Signal Freq Mag Point
VCC supply current & Internal reference regulator
VCC supply
current
V3
Internal reference
regulator voltage
Voltage gain
T16
Voltage gain
Py/Pb/Pr
R/G/B
Frequency response
T1A T2A
T4A T5A
T7A T8A
SIG2
100k 300mVpp
T15
T13
T11
Frequency
response
at LPF_Through
Frequency
response 1
at 6MHz_LPF
Frequency
response 2
at 6MHz _LPF
Py/Pb/Pr
R/G/B
Py/Pb/Pr
R/G/B
T1A T2A
T4A T5A
T7A T8A
T1A T2A
T4A T5A
T7A T8A
SIG2
SIG2
60M
300mVpp
100k
6M
300mVpp
100k
T15
T13
T11
T15
T13
T11
Py/Pb/Pr
R/G/B
T1A T2A
T4A T5A
T7A T8A
SIG2
13.5M
300mVpp
100k
T15
T13
T11
Frequency
response 1
at 12MHz_LPF
Frequency
response 2
at 12MHz_LPF
Frequency
response 1
at 30MHz_LPF
Frequency
response 2
at 30MHz_LPF
Frequency
response 3
at 30MHz_LPF
S/N
S/N ratio
at 30MHz_LPF
Crosstalk
Crosstalk
Py/Pb/Pr
R/G/B
Py/Pb/Pr
R/G/B
Py/Pb/Pr
R/G/B
Py/Pb/Pr
R/G/B
Py/Pb/Pr
R/G/B
T1A T2A
T4A T5A
T7A T8A
T1A T2A
T4A T5A
T7A T8A
T1A T2A
T4A T5A
T7A T8A
T1A T2A
T4A T5A
T7A T8A
T1A T2A
T4A T5A
T7A T8A
SIG2
SIG2
SIG2
SIG2
SIG2
12M
300mVpp
100k
27M
300mVpp
100k
20M
300mVpp
100k
30M
300mVpp
100k
74M
300mVpp
100k
T15
T13
T11
T15
T13
T11
T15
T13
T11
T15
T13
T11
T15
T13
T11
Py
T1A T2A
T15
R 30M
T4A T5A SIG1
650mVpp T13
G 100k
T7A T8A
T11
B
Py/Pb/Pr
R/G/B
T1A T2A
T4A T5A
T7A T8A
SIG2
T15
5M 700mVpp T13
T11
Test Condition
At non-signal, The current
flows to 3pin
The voltage of 16pin
Output gain for input
LPF_Through is selected,
Output gain difference
between 100kHz and 60MHz
6MHz_LPF is selected,
Output gain difference
between 100kHz and 6MHz
6MHz_LPF is selected,
Output gain difference
between 100kHz and
13.5MHz
12MHz_LPF is selected,
Output gain difference
between 100kHz and 12MHz
12MHz_LPF is selected,
Output gain difference
between 100kHz and 27MHz
30MHz_LPF is selected,
Output gain difference
between 100kHz and 20MHz
30MHz_LPF is selected,
Output gain difference
between 100kHz and 30MHz
30MHz_LPF is selected,
Output gain difference
between 100kHz and 74MHz
30MHz_LPF is selected,
The S/N ratio from 100kHz to
30MHz
The ratio of the output leak of
the non-selection input
Ratings
min typ max
unit
26 34 42 mA
2.8 3.0 3.2 V
-0.5 -0.2
0.0 dB
-3.0 -1.0
1.0 dB
-3.0 0.0 1.0 dB
-30.0 -20.0 dB
-3.0 0.0 1.0 dB
-30.0 -20.0 dB
-1.0 0.0 1.0 dB
-3.5 -1.0
1.5 dB
-45.0 -33.0 dB
-60.0 -50.0 dB
-60.0 -55.0 dB
Continued on next page.
No.A0896-2/7
Datasheet pdf - http://www.DataSheet4U.net/

No Preview Available !

www.DataSheet.co.kr
LV7150V
Continued from preceding page.
Parameter
Input
Group delay
Group delay
at LPF_Through
Group delay
at 6MHz_LPF
Group delay
at 12MHz_LPF
Group delay
at 30MHz_LPF
Py/Pb/Pr
R/G/B
Py/Pb/Pr
R/G/B
Py/Pb/Pr
R/G/B
Py/Pb/Pr
R/G/B
Input signal
Out
Point Signal Freq Mag Point
T1A T2A
T4A T5A
T7A T8A
T1A T2A
T4A T5A
T7A T8A
T1A T2A
T4A T5A
T7A T8A
T1A T2A
T4A T5A
T7A T8A
SIG2
SIG2
SIG2
SIG2
60M
300mVpp
100k
6M
300mVpp
100k
12M
300mVpp
100k
30M
300mVpp
100k
T15
T13
T11
T15
T13
T11
T15
T13
T11
T15
T13
T11
Test Condition
LPF_Through is selected,
Delay difference between
100kHz and 60MHz
6MHz_LPF is selected,
Delay difference between
100kHz and 6MHz
12MHz_LPF is selected,
Delay difference between
100kHz and 12MHz
30MHz_LPF is selected,
Delay difference between
100kHz and 30MHz
Ratings
min typ max
unit
0.5 2.0 ns
40.0 70.0 ns
20.0 40.0 ns
10.0 20.0
ns
Package Dimensions
unit : mm (typ)
3178B
5.2
16
9
1
(0.33)
0.65
8
0.22
0.15
SANYO : SSOP16(225mil)
Pin Control Table
Pin Control Table
SW No.
SW1
SW2
SW3
SW4
Input Control Table
CLAMP/BIAS_CTL
Low (0 to 0.7V)
High (2.3V to VCC)
Pin No.
Pin12
Pin10
Pin9
Pin14
SW function name
CLAMP/BIAS_CTL
Filter_CTL1
Filter_CTL2
Input_Select_CTL
Mode selected
CLAMP (Y/Pb/Pr_Mode)
BIAS (RGB_Mode)
Continued on next page.
No.A0896-3/7
Datasheet pdf - http://www.DataSheet4U.net/

No Preview Available !

www.DataSheet.co.kr
Continued from preceding page.
Filter Control Table
Filter_CTL1
Low (0 to 0.7V)
Low (0 to 0.7V)
High (2.3V to VCC)
High (2.3V to VCC)
Input Select Control Table
Input_Select_CTL
Low (0 to 0.7V)
High (2.3V to VCC)
Block Diagram
LV7150V
Filter_CTL2
Low (0 to 0.7V)
High (2.3V to VCC)
Low (0 to 0.7V)
High (2.3V to VCC)
Mode selected
6Mz_LPF
12Mz_LPF
30Mz_LPF
LPF_Through
Mode selected
CH1_select
CH2_select
Pr/R_IN1
1F
+
1
Pr/R_IN2
1F
+
2
VCC 3
Py/G_IN1
1F
+
4
Py/G_IN2
1F
+
5
GND 6
Pb/B_IN1
1F
+
7
Pb/B_IN2
1F
+
8
BIAS
100k
BIAS
100k
SW4:
Input_Select
_CTL
6MHz
LPF
12MHz
LPF
30MHz
LPF
Through
VREG_3V
BUF
SW2&SW3:
Filter_CTL
CLAMP
BIAS
100k
CLAMP
BIAS
100k
SW1:
CLAMP/BIAS_
CTL
SW4:
Input_Select
_CTL
SW1:
CLAMP/BIAS_
CTL
BIAS
100k
6MHz
LPF
12MHz
LPF
30MHz
LPF
Through
6MHz
LPF
12MHz
LPF
30MHz
LPF
Through
BUF
SW2&SW3:
Filter_CTL
BUF
SW2&SW3:
Filter_CTL
1F
16 +
10 F Pr/R_OUT
15 +
14 SW4:Input_Select_CTL
10 F Py/G_OUT
13 +
12 SW1:CLAMP/BIAS_CTL
10 F Pb/B_OUT
11 +
10 SW2:Filter_CTL1
BIAS
100k
SW4:
Input_Select_CTL
9 SW3:Filter_CTL2
No.A0896-4/7
Datasheet pdf - http://www.DataSheet4U.net/

No Preview Available !

www.DataSheet.co.kr
Pin Function
Pin No.
Pin name
P1 Pr/R_IN1
DC voltage
2.3V
LV7150V
Signal wave form
Input/Output form
P2 Pr/R_IN2
2.3V
P3 VCC
P4 Py/G_IN1
Y/Pb/Pr:
1.8V (Clamp)
RGB: 2.3V (Bias)
P5 Py/G_IN2
Y/Pb/Pr:
1.8V (Clamp)
RGB: 2.3V (Bias)
P6 GND
P7 Pb/B_IN1
2.3V
Continued on next page.
No.A0896-5/7
Datasheet pdf - http://www.DataSheet4U.net/