A030FL01_V0.pdf 데이터시트 (총 30 페이지) - 파일 다운로드 A030FL01_V0 데이타시트 다운로드

No Preview Available !

Doc. Version
To ta l P a g e s
Date
0.5
31
2008/5/19
Product Specification
3.0” COLOR TFT-LCD MODULE
www.DataSheet.co.kr
MODEL NAME: A030FL01 V0
< >Preliminary Specification
<>Final Specification
© 2008 AU Optronics
All Rights Reserved.
DO NOT COPY
Note: The content of this specification is subject to change.
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED,
OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.
Datasheet pdf - http://www.DataSheet4U.net/

No Preview Available !

Version Revise Date
0 19/Dec/2006
0.1 29/Dec/2006
0.2 02/Apr/2007
0.3 08/Jun/2007
0.3a 23/Jul/2007
0.4 16/Oct/2007
0.5 19/May/2008
Page
Record of Revision
Content
First draft.
4
6
9
10-11
22-26
31
4
9
10-11
13
18
27
28
4
4
4
Update module outline drawing.
Correct pin37 definition.
Update LED current.
Update application circuit, add internal LED driving function.
Update R10~R13 register setting description.
Add figure of “Packing Form”.
Update module outline drawing.
Correct note1 for “four” LEDs type.
Update R4 value.
Correct min cycle setting value of “1 Line Scanning Time”.
Add R64, R66, R68 setting.
Update “Suggested Serial Command Settings”.
Update contrast ratio and white chromaticity.
Update module outline with conductive tape, and change
printing barcode.
Mark pin 1, 35, 36, 70 location in FPC connector.
Define thickness of FPC + stiffener.
To add two interwww.DataSheet.co.kr protrusions on each long site of upper
bezel, and to remove Al tape on bezel.
5 Add Board-to-Board Connetor Type
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED,
OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.
Datasheet pdf - http://www.DataSheet4U.net/

No Preview Available !

Version: 0.5
Page: 1/31
Contents
GENERAL DESCRIPTION
FEATURES
1. GENERAL INFORMATION
2. ELECTRICAL SPECIFICATIONS
2.1 FPC PIN ASSIGNMENT
2.2 ABSOLUTE MAXIMUM RATINGS
3. ELECTRICAL CHARACTERISTICS
3.1 TFT- LCD TYPICAL OPERATION CONDITION
3.2 BACKLIGHT DRIVING CONDITIONS
3.3 SUGGESTED APPLICATION CIRCUIT
3.3.1 SUGGESTED APPLICATION CIRCUIT
3.3.2 SUGGESTED APPLICATION CIRCUIT
3.4 AC TIMING
www.DataSheet.co.kr
3.4.1 TIMING DIAGRAM
3.4.2 TIMING CONDITION
3.5 POWER ON/OFF SEQUENCE
3.5.1 POWER-ON (DISPLAY ON; STANDBY DISABLING)
3.5.2 POWER-OFF (DISPLAY OFF; STANDBY ENABLING)
3.5.3 LOW-VOLTAGE RESET
3.6 SERIAL CONTROL SETTING
3.6.1 INPUT TIMING SPECIFICATIONS (REFER TO FIG. 1)
3.6.2 SERIAL SETTING TABLE
4. OPTICAL SPECIFICATIONN
5. ABSOLUTE RATINGS OF AMBIENT ENVIRONMENT
6. PACKING FORM
2
2
3
5
5
8
8
8
9
10
10
11
12
12
13
13
13
15
16
17
17
18
28
30
31
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED,
OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.
Datasheet pdf - http://www.DataSheet4U.net/