B116XW02_V0.pdf 데이터시트 (총 30 페이지) - 파일 다운로드 B116XW02_V0 데이타시트 다운로드

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
( V ) Preliminary Specifications
( ) Final Specifications
Module
Model Name
Note ( )
11.6”(11.57”) WXGA Color TFT-LCD with LED Backlight design
B11.6XW02 V0 (H/W:0A)
LED Backlight with driving circuit design
Customer
Checked &
Approved by
Date
Date
Approved by
www.DataSheet.co.kr
Date
MM/DD/YYYY
Prepared by
02/13/2009
Note: This Specification is subject to change
without notice.
NBBU Marketing Division /
AU Optronics corporation
B116XW02 V0 Document Version : 0.3
1 of 38
Datasheet pdf - http://www.DataSheet4U.net/

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
Contents
1. Handling Precautions .............................................................. 4
2. General Description ................................................................ 5
2.1 General Specification ..........................................................................................................................5
2.2 Optical Characteristics ........................................................................................................................6
3. Functional Block Diagram ..................................................... 11
4. Absolute Maximum Ratings................................................... 12
4.1 Absolute Ratings of TFT LCD Module.............................................................................................12
4.2 Absolute Ratings of Environment .....................................................................................................12
5. Electrical characteristics ....................................................... 13
5.1 TFT LCD Module..............................................................................................................................13
5.2 Backlight Unit ...................................................................................................................................15
6. Signal Characteristic ............................................................. 16
6.1 Pixel Format Image ...........................................................................................................................16
6.2 The input data format ........................................................................................................................17
6.3 Integration Interface and Pin Assignment..........................................................................................18
6.4 Interface Timing ................................................................................................................................22
7. Connector Description........................................................... 25
7.1 TFT LCD Module..............................................................................................................................25
8. LED Driving Specification .......................www.DataSheet.co.kr ............................... 26
8.1 Connector Description.......................................................................................................................26
8.2 Pin Assignment..................................................................................................................................26
9. Vibration and Shock Test ...................................................... 27
9.1 Vibration Test ....................................................................................................................................27
9.2 Shock Test Spec:................................................................................................................................27
10. Reliability............................................................................ 28
11. Mechanical Characteristics.................................................. 29
11.1 LCM Outline Dimension .................................................................................................................29
11.2 Screw Hole Depth and Center Position ...........................................................................................31
12. Shipping and Package ......................................................... 32
12.1 Shipping Label Format ....................................................................................................................32
12.2 Carton package ................................................................................................................................33
12.3 Shipping package of palletizing sequence.......................................................................................34
13. Appendix: EDID description ................................................ 35
B116XW02 V0 Document Version : 0.3
2 of 38
Datasheet pdf - http://www.DataSheet4U.net/

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
Record of Revision
Version and Date Page
Old description
0.1 2008/12/26 All First Edition for Customer
0.2 2009/01/07 1 Module: 11.6”
34 EDID: TBD
0.3 2009/02/13 6
15
Response Time
Rising: TBD(typ), TBD(max)
Falling: TBD(typ), TBD(max)
LED Power Consumption and LED
Life-Time
New Description
Module: 11.6” (11.57”)
EDID:Added
Response Time
Rising: 6ms(typ), 8ms(max)
Falling: 2ms(typ), 4ms(max)
LED Power Consumption and LED
Life-Time
Remark
modified
Added
Updated
Updated
min typ
max unit
LED Power
consumption
TBD TBD Watt
LED
Life-Time
TBD
LED Power
consumption
LED
Life-Time
min
15000
typ
2710
max
288
0
unit
mWatt
25 LVDS Connector Type
www.DataSheet.co.kr
LVDS Connector Type
Modified
Type / Part
Number
IPEX 20455-040E-12 or
compatible
31 Screw Hole Depth and Center Position
TBD
32 Shipping Label Format: TBD
Type / Part
Number
IPEX 20455-040E-12A or
compatible
Screw Hole Depth and Center Position
Attached
Shipping Label Format:Added
Updated
Updated
33 Carton package:TBD
Carton package: Added
Updated
34 Shipping package of palletizing sequence:TBD Shipping package of palletizing sequence:Added Updated
19 6.3 Integration Interface and Pin Assignment
6.3 Integration Interface and Pin Assignment
Modified
38 VLED LED Power Supply 7V-20V
38 VLED LED Power Supply 6V-21V
39 VLED LED Power Supply 7V-20V
39 VLED LED Power Supply 6V-21V
40 VLED LED Power Supply 7V-20V
40 VLED LED Power Supply 6V-21V
B116XW02 V0 Document Version : 0.3
3 of 38
Datasheet pdf - http://www.DataSheet4U.net/

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
1. Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input
connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration
or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on
hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure
human earth when handling.
7) Do not open nor modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) At the insertion or removal of the Signal Interface Connector, be sure not to rotate
nor tilt the Interface Connector of the TFT Module.
11)After installation of the TFT Module into an enclosure (Notebook PC Bezel, for
example), do not twist nor bend the TFT Module even momentary. At designing the
enclosure, it should be taken into consideration that no bending/twisting forces are
applied to the TFT Module from outside. Otherwise the TFT Module may be
www.DataSheet.co.kr
damaged.
12)Small amount of materials having no flammability grade is used in the LCD module. The
LCD module should be supplied by power complied with requirements of Limited Power
Source (IEC60950 or UL1950), or be applied exemption.
13)Disconnecting power supply before handling LCD modules, it can prevent electric shock,
DO NOT TOUCH the electrode parts, cables, connectors and LED circuit part of TFT
module that a LED light bar build in as a light source of back light unit. It can prevent
electrostic breakdown.
B116XW02 V0 Document Version : 0.3
4 of 38
Datasheet pdf - http://www.DataSheet4U.net/

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
2. General Description
B116XW02 V0 is a Color Active Matrix Liquid Crystal Display composed of a TFT LCD panel,
a driver circuit, and LED backlight system. The screen format is intended to support the
WXGA (1366(H) x 768(V)) screen and 262k colors (RGB 6-bits data driver) with LED
backlight driving circuit. All input signals are LVDS interface compatible.
B116XW02 V0 is designed for a display unit of notebook style personal computer and
industrial machine.
2.1 General Specification
The following items are characteristics summary on the table at 25 condition:
Items
Screen Diagonal
Active Area
Unit
[mm]
[mm]
11.6W”
Specifications
256.125 X 144.0
Pixels H x V
1366x3(RGB) x 768
Pixel Pitch
[mm] 0.1875 x 0.1875
Pixel Format
R.G.B. Vertical Stripe
Display Mode
Normally White
www.DataSheet.co.kr
White Luminance (ILED=20mA)
(Note: ILED is LED current)
Luminance Uniformity
Contrast Ratio
Response Time
Nominal Input Voltage VDD
[cd/m2]
[ms]
[Volt]
200 typ. (5 points average)
170 min. (5 points average)
1.25 max. (5 points)
500:1 typ
8 typ / 12 Max
+3.3 typ.
Power Consumption
[Watt] 4.0 max. (Include Logic and Blu power)
Weight
Physical Size without inverter,
bracket.
Electrical Interface
[Grams] 255g max.
[mm]
Min.
Length
267.5
Width
161.0
Thickness
-
1 channel LVDS
Typ.
268.0
161.5
-
Max.
268.5
162.0
5.2
Glass Thickness
[mm] 0.5
Surface Treatment
Support Color
Glare, Hardness 3H,
Reflection <4%
262K colors ( RGB 6-bit )
B116XW02 V0 Document Version : 0.3
5 of 38
Datasheet pdf - http://www.DataSheet4U.net/