G104SN03-V1.pdf 데이터시트 (총 25 페이지) - 파일 다운로드 G104SN03-V1 데이타시트 다운로드

No Preview Available !

www.DataSheet4U.net
Product Specification
AU OPTRONICS CORPORATION
(V ) Preliminary Specifications
( ) Final Specifications
Module
Model Name
10.4 Inch Color TFT-LCD
G104SN03 V1
G104SN03 V1
Customer
Date
Approved by
Date
Checked &
Approved by
Note: This Specification is subject to change
without notice.
2006/11/23
Prepared by
2006/11/23
General Display Business Division /
AU Optronics corporation
G104SN03 V1 rev.0.1
1/25

No Preview Available !

www.DataSheet4U.net
Product Specification
AU OPTRONICS CORPORATION
G104SN03 V1
Contents
1. Operating Precautions......................................................................................... 4
2. General Description ............................................................................................. 5
2.1 Display Characteristics ......................................................................................................5
2.2 Optical Characteristics .......................................................................................................6
3. Functional Block Diagram................................................................................... 9
4. Absolute Maximum Ratings .............................................................................. 10
4.1 Absolute Ratings of TFT LCD Module..............................................................................10
4.2 Absolute Ratings of Environment .....................................................................................10
5. Electrical Characteristics .................................................................................. 11
5.1 TFT LCD Module.............................................................................................................. 11
5.2 Backlight Unit ...................................................................................................................13
6. Signal Characteristic ......................................................................................... 14
6.1 Pixel Format Image ..........................................................................................................14
6.2 Scanning Direction ...........................................................................................................14
6.3 Signal Description ............................................................................................................15
6.4 The Input Data Format .....................................................................................................16
6.5 Interface Timing................................................................................................................18
6.6 Power ON/OFF Sequence ...............................................................................................19
7. Connector & Pin Assignment ........................................................................... 20
7.1 TFT LCD Module: LVDS Connector .................................................................................20
7.2 Backlight Unit: Lamp Connector.......................................................................................20
7.3 Lamp Connector Pin Assignment .....................................................................................20
8. Reliability Test Criteria ...................................................................................... 21
9. Mechanical Characteristics............................................................................... 22
9.1 LCM Outline Dimension (Front View)...............................................................................22
9.2 LCM Outline Dimension (Rear View) ...............................................................................22
10. Label and Packaging........................................................................................ 24
10.1 Shipping Label (on the rear side of TFT-LCD display)...................................................24
10.2 Carton Package .............................................................................................................24
11 Safety.................................................................................................................. 25
11.1 Sharp Edge Requirements .............................................................................................25
11.2 Materials.........................................................................................................................25
11.3 Capacitors ......................................................................................................................25
11.4 National Test Lab Requirement ......................................................................................25
G104SN03 V1 rev.0.1
2/25

No Preview Available !

www.DataSheet4U.net
Record of Revision
Product Specification
AU OPTRONICS CORPORATION
G104SN03 V1
Version and Date Page
Old description
0.1 Nov 23, 2006 All First draft specification
New Description
-
G104SN03 V1 rev.0.1
3/25

No Preview Available !

www.DataSheet4U.net
Product Specification
AU OPTRONICS CORPORATION
G104SN03 V1
1. Operating Precautions
1) Since front polarizer is easily damaged, please be cautious and not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or soft cloth.
5) Since the panel is made of glass, it may be broken or cracked if dropped or bumped on hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth when
handling.
7) Do not open nor modify the module assembly.
8) Do not press the reflector sheet at the back of the module to any direction.
9) In case if a module has to be put back into the packing container slot after it was taken out from the
container, do not press the center of the CCFL Reflector edge. Instead, press at the far ends of the CCFL
Reflector edge softly. Otherwise the TFT Module may be damaged.
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the Interface
Connector of the TFT Module.
11) After installation of the TFT Module into an enclosure (Notebook PC Bezel, for example), do not twist nor
bend the TFT Module even momentary. At designing the enclosure, it should be taken into consideration
that no bending/twisting forces are applied to the TFT Module from outside. Otherwise the TFT Module
may be damaged.
12) Cold cathode fluorescent lamp in LCD contains a small amount of mercury. Please follow local ordinances or
regulations for disposal.
13) Small amount of materials having no flammability grade is used in the LCD module. The LCD module should be
supplied by power complied with requirements of Limited Power Source (IEC60950 or UL1950), or be applied
exemption.
14) The LCD module is designed so that the CCFL in it is supplied by Limited Current Circuit (IEC60950 or UL1950).
Do not connect the CCFL in Hazardous Voltage Circuit.
15) Severe temperature condition may result in different luminance, response time and lamp ignition voltage.
16) Continuous operating TFT-LCD display under low temperature environment may accelerate lamp exhaustion
and reduce luminance dramatically.
17) The data on this specification sheet is applicable when LCD module is placed in landscape position.
18)Continuous displaying fixed pattern may induce image sticking. Its recommended to use screen saver or shuffle
content periodically if fixed pattern is displayed on the screen.
G104SN03 V1 rev.0.1
4/25

No Preview Available !

www.DataSheet4U.net
Product Specification
AU OPTRONICS CORPORATION
G104SN03 V1
2. General Description
G104SN03 V1 is a Color Active Matrix Liquid Crystal Display composed of a TFT-LCD display, a driver circuit, and
a backlight system. The screen format is intended to support SVGA (800(H) x 600(V)) screen and 16.8M (RGB
8-bits) or 262K colors (RGB 6-bits). All input signals are LVDS interface compatible. Inverter card of backlight is
not included.
G104SN03 V1 is designed for industrial display applications.
2.1 Display Characteristics
The following items are characteristics summary on the table under 25 condition:
Items
Screen Diagonal
Active Area
Pixels H x V
Pixel Pitch
Pixel Arrangement
Display Mode
Nominal Input Voltage VDD
Typical Power Consumption
Weight
Physical Size
Electrical Interface
Surface Treatment
Unit
[inch]
[mm]
[mm]
[Volt]
[Watt]
[Grams]
[mm]
Specifications
10.4
211.2(H) x 158.4(V)
800x3(RGB) x 600
0.264 x 0.264
R.G.B. Vertical Stripe
TN, Normally White
3.3 typ.
4.26W (IRCFL=5.0mA)
3.56W (IRCFL=3.8mA)
All black pattern
300g(typ.)
236.0(H)x 174.3(V) x 5.6(D) (typ.)
1 channel LVDS
Anti-glare, Hardness 3H
Support Color
Temperature Range
Operating
Storage (Non-Operating)
RoHS Compliance
16.8M / 262K colors
[oC] -20 to +70
[oC] -30 to +80
RoHS Compliance
G104SN03 V1 rev.0.1
5/25