G150XG03-V3.pdf 데이터시트 (총 29 페이지) - 파일 다운로드 G150XG03-V3 데이타시트 다운로드

No Preview Available !

www.DataSheet4U.net
(V) Preliminary Specifications
( ) Final Specifications
Module
Model Name
15 Inch Color TFT-LCD
G150XG03 V3
G150XG03 V3
Customer
Date
Checked &
Approved by
Note: This Specification is subject to change
without notice.
Approved by
Date
Debbie Chiu
2009/08/03
Prepared by
Danny Wang
2009/08/03__
General Display Business Division /
AU Optronics corporation
G150XG03 V3 rev. 0.0
1/29

No Preview Available !

www.DataSheet4U.net
G150XG03 V3
Contents
1. Operating Precautions.....................................................................................4
2. General Description .........................................................................................5
2.1 Display Characteristics...........................................................................................................5
2.2 Optical Characteristics ...........................................................................................................6
3. Functional Block Diagram ...............................................................................9
4. Absolute Maximum Ratings ..........................................................................10
4.1 Absolute Ratings of TFT LCD Module .................................................................................10
4.2 Absolute Ratings of Environment ........................................................................................10
5. Electrical Characteristics ..............................................................................11
5.1 TFT LCD Module .................................................................................................................. 11
5.2 Backlight Unit........................................................................................................................13
6. Signal Characteristic .....................................................................................15
6.1 Pixel Format Image ..............................................................................................................15
6.2 Scanning Direction ...............................................................................................................15
6.3 Signal Description ................................................................................................................16
6.4 The Input Data Format .........................................................................................................17
6.5 Interface Timing ....................................................................................................................18
6.6 Power ON/OFF Sequence ...................................................................................................19
7. Connector & Pin Assignment ........................................................................20
7.1 TFT LCD Module: LVDS Connector.....................................................................................20
7.2 Backlight Unit: Lamp Connector ..........................................................................................22
7.3 Lamp Connector Pin Assignment ........................................................................................22
8. Reliability Test Criteria ..................................................................................23
9. Mechanical Characteristics ...........................................................................24
9.1 LCM Front View and Rear View...........................................................................................24
9.2 LCM Outline Dimension (Front View) ..................................................................................25
9.3 LCM Outline Dimension (Rear View)...................................................................................25
10. Label and Packaging....................................................................................28
10.1 Shipping Label (on the rear side of TFT-LCD display) ......................................................28
10.2 Carton Package .................................................................................................................28
11 Safety.............................................................................................................29
11.1 Sharp Edge Requirements.................................................................................................29
11.2 Materials .............................................................................................................................29
11.3 Capacitors...........................................................................................................................29
11.4 National Test Lab Requirement..........................................................................................29
G150XG03 V3 rev. 0.0
2/29

No Preview Available !

www.DataSheet4U.net
Record of Revision
Version and Date Page
Old description
0.0 2009/07/06
All First Edition
G150XG03 V3
New Description
G150XG03 V3 rev. 0.0
3/29

No Preview Available !

www.DataSheet4U.net
G150XG03 V3
1. Operating Precautions
1) Since front polarizer is easily damaged, please be cautious and not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or
spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or soft cloth.
5) Since the panel is made of glass, it may be broken or cracked if dropped or bumped on
hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human
earth when handling.
7) Do not open nor modify the module assembly.
8) Do not press the reflector sheet at the back of the module to any direction.
9) In case if a module has to be put back into the packing container slot after it was taken
out from the container, do not press the center of the CCFL Reflector edge. Instead,
press at the far ends of the CFL Reflector edge softly. Otherwise the TFT Module may
be damaged.
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor
tilt the Interface Connector of the TFT Module.
11) After installation of the TFT Module into an enclosure (Notebook PC Bezel, for
example), do not twist nor bend the TFT Module even momentary. At designing the
enclosure, it should be taken into consideration that no bending/twisting forces are
applied to the TFT Module from outside. Otherwise the TFT Module may be damaged.
12) Cold cathode fluorescent lamp in LCD contains a small amount of mercury. Please follow
local ordinances or regulations for disposal.
13) Small amount of materials having no flammability grade is used in the LCD module. The LCD
module should be supplied by power complied with requirements of Limited Power Source
(IEC60950 or UL1950), or be applied exemption.
14) The LCD module is designed so that the CFL in it is supplied by Limited Current Circuit
(IEC60950 or UL1950). Do not connect the CFL in Hazardous Voltage Circuit.
15) Severe temperature condition may result in different luminance, response time and lamp
ignition voltage.
16) Continuous operating TFT-LCD display under low temperature environment may accelerate
lamp exhaustion and reduce luminance dramatically.
17) The data on this specification sheet is applicable when LCD module is placed in landscape
position.
18) Continuous displaying fixed pattern may induce image sticking. It’s recommended to use
screen saver or shuffle content periodically if fixed pattern is displayed on the screen.
G150XG03 V3 rev. 0.0
4/29

No Preview Available !

www.DataSheet4U.net
G150XG03 V3
2. General Description
G150XG03 V3 is a Color Active Matrix Liquid Crystal Display composed of a TFT-LCD display, a
driver circuit, and a backlight system. The screen format is intended to support XGA (1024(H) x
768(V)) screen and 16.2M (RGB 8-bits) coloars. All input signals are LVDS interface
 compatible. Inverter card of backlight is not included. All design rules of this module can
correspond to PSWG standard.
2.1 Display Characteristics
The following items are characteristics summary on the table under 25 condition:
Items
Screen Diagonal
Active Area
Pixels H x V
Pixel Pitch
Pixel Arrangement
Display Mode
Nominal Input Voltage VDD
Unit
[inch]
[mm]
[mm]
[Volt]
Specifications
15
304.128(H) x 228.096(V)
1024x3(RGB) x 768
0.297 x 0.297
R.G.B. Vertical Stripe
TN, Normally White
3.3 typ.
Typical Power Consumption
[Watt]
12.82 ( 64 Gray Bar Pattern , exclude inverter)
Weight
Physical Size
Electrical Interface
Surface Treatment
Support Color
Temperature Range
Operating
Storage (Non-Operating)
RoHS Compliance
[Grams]
[mm]
[oC]
[oC]
1100g (max.)
326.5(H)x 253.5(V) x 12.0(D) (max.)
1 channel LVDS
Anti-glare, Hardness 3H
16.2M
0 to +65 (+65 oC as panel surface temperature)
-20 to +65
RoHS Compliance
G150XG03 V3 rev. 0.0
5/29