N121I1-L02.pdf 데이터시트 (총 23 페이지) - 파일 다운로드 N121I1-L02 데이타시트 다운로드

No Preview Available !

Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Apr. 05, 2004
Model No.: N121I1 -L02
Preliminary
TFT LCD Preliminary Specification
MODEL NO.: N121I1 - L02
Liquid Crystal Display Division
QRA Division.
OA Head Division.
Approval
Approval
1 / 23
The information described in this technical specification is tentative and it is possible to be changed without prior
notice. Please contact CMO ’s representative while your product design is based on this specification. Version 1.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com

No Preview Available !

Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Apr. 05, 2004
Model No.: N121I1 -L02
Preliminary
- CONTENTS -
REVISION HISTORY
-------------------------------------------------------
1. GENERAL DESCRIPTION
1.1 OVERVIEW
1.2 FEATURES
1.3 APPLICATION
1.4 GENERAL SPECIFICATIONS
1.5 MECHANICAL SPECIFICATIONS
-------------------------------------------------------
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
2.2 ELECTRICAL ABSOLUTE RATINGS
2.2.1 TFT LCD MODULE
2.2.2 BACKLIGHT UNIT
-------------------------------------------------------
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE
3.2 BACKLIGHT UNIT
-------------------------------------------------------
4. BLOCK DIAGRAM
4.1 TFT LCD MODULE
4.2 BACKLIGHT UNIT
-------------------------------------------------------
5. INPUT TERMINAL PIN ASSIGNMENT
5.1 TFT LCD MODULE
5.2 BACKLIGHT UNIT
5.3 TIMING DIAGRAM OF LVDS INPUT SIGNAL
5.4 COLOR DATA INPUT ASSIGNMENT
-------------------------------------------------------
6. INTERFACE TIMING
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
6.2 POWER ON/OFF SEQUENCE
-------------------------------------------------------
7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS
7.2 OPTICAL SPECIFICATIONS
-------------------------------------------------------
8. PRECAUTIONS
8.1 HANDLING PRECAUTIONS
8.2 STORAGE PRECAUTIONS
8.3 OPERATION PRECAUTIONS
-------------------------------------------------------
9. PACKING
9.1 CARTON
9.2 PALLET
-------------------------------------------------------
10. DEFINITION OF LABELS
10.1 CMO MODULE LABEL
10.2 CARTON LABEL
-------------------------------------------------------
3
4
5
7
10
11
16
18
22
23
25
2 / 23
The information described in this technical specification is tentative and it is possible to be changed without prior
notice. Please contact CMO ’s representative while your product design is based on this specification. Version 1.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com

No Preview Available !

Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Apr. 05, 2004
Model No.: N121I1 -L02
Preliminary
REVISION HISTORY
Version
Ver 0.0
Ver 1.0
Date
Mar. 16,’04
Apr. 05,’04
Page
(New)
Section
Description
All All Tentative specification first issued.
4 1.5 Change weight from 305g to 300g
14 6.2 Change power sequence to
0 < t2 Љ 50 msec
0 < t3 Љ 50 msec
6 2.2 Change lamp current from 7.0 to 6.5mA
8 3.2 Modify note(2)(3) for lamp current
20 9.1 Change module input direction to horizontal.
Outline
- drawing Change connector distance to 107̈́ 1.0mm
3 / 23
The information described in this technical specification is tentative and it is possible to be changed without prior
notice. Please contact CMO ’s representative while your product design is based on this specification. Version 1.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com

No Preview Available !

Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Apr. 05, 2004
Model No.: N121I1 -L02
Preliminary
1. GENERAL DESCRIPTION
1.1 OVERVIEW
N121I1 -L02 is a 12.1” TFT Liquid Crystal Display module with single CCFL Backlight unit and 20 pins
LVDS interface. This module supports 1280 x 800 Wide-XGA mode and can display 262,144 colors. The
optimum viewing angle is at 6 o’clock direction. The inverter module for Backlight is not built in.
1.2 FEATURES
- Thin and light weight
- WXGA (1280 x 800 pixels) resolution
- 3.3V LVDS (Low Voltage Differential Signaling) interface with 1 pixel/clock
1.3 APPLICATION
- TFT LCD Notebook
1.4 GENERAL SPECIFICATI0NS
Item
Active Area
Bezel Opening Area
Driver Element
Pixel Number
Pixel Pitch
Pixel Arrangement
Display Colors
Transmissive Mode
Surface Treatment
Specification
261.12 (H) x 163.2 (V) (12.1” diagonal)
264.12 (H) x 166.2 (V)
a-si TFT active matrix
1280 x R.G.B. x 800
0.204 (H) x 0.204 (V)
RGB vertical stripe
262,144
Normally white
Hard coating (2H), glare type
Unit
mm
mm
-
pixel
mm
-
color
-
-
Note
(1)
-
-
-
-
-
-
-
1.5 MECHANICAL SPECIFICATIONS
Item
Horizontal(H)
Module Size Vertical(V)
Depth(D)
Weight
Min.
275.3
177.5
-
-
Typ.
275.8
178
5.2
300
Max.
276.3
178.5
5.5
315
Unit Note
mm
mm (1)
mm
g-
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
4 / 23
The information described in this technical specification is tentative and it is possible to be changed without prior
notice. Please contact CMO ’s representative while your product design is based on this specification. Version 1.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com

No Preview Available !

Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Apr. 05, 2004
Model No.: N121I1 -L02
Preliminary
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item
Storage Temperature
Operating Ambient Temperature
Shock (Non-Operating)
Vibration (Non-Operating)
Symbol
TST
TOP
SNOP
VNOP
Value
Min. Max.
-20 +60
0 +50
- (200)
- (1.5)
Note (1) Temperature and relative humidity range is shown in the figure below.
(a) 90 %RH Max. (Ta Љ 40 ºC).
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
Relative Humidity
100
90
80
60
Operating Range
40
20
5 Storage Range
-40 -20
0 20
Temperature (ºC)
40
Unit Note
ºC (1)
ºC (1), (2)
G (3), (5)
G (4), (5)
60 80
Note (2) The temperature of panel surface should be 0 ºC Min. and 50 ºC Max.
Note (3) 3ms, half sine wave, 1 time for ± X, ± Y, ± Z.
Note (4) 10 ~ 500Hz, 0.5 Hr/cycle, 0.5hr each X, Y, Z,
Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough
so that the module would not be twisted or bent by the fixture.
5 / 23
The information described in this technical specification is tentative and it is possible to be changed without prior
notice. Please contact CMO ’s representative while your product design is based on this specification. Version 1.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com