WLS1A11BQBT3.pdf 데이터시트 (총 8 페이지) - 파일 다운로드 WLS1A11BQBT3 데이타시트 다운로드

No Preview Available !

WLS Series
Limitless™ Single Switch Adapter
DESCRIPTION
Honeywell’s Limitless™ product line uses the latest commercial
off-the-shelf wireless technology and is now expanding the WLS
Series to convert almost any electromechanical switch with
low-energy contacts (i.e., gold) into a wireless switch. A user-
supplied electromechanical switch is simply wired to the WLS
Series Single Switch Adapter via the internal or external connec-
tions to then become a wireless-enabled switch for use with the
Limitless™ WPMM or WDRR Series of monitors/receivers. The
Limitless™ Single Switch Adapter can be used in a variety of in-
dustrial wireless limit switch applications such as reed, contact,
pressure, door actuator, etc.
The Limitless™ Series is especially beneficial for remote moni-
toring applications where wiring or wire maintenance is not
physically possible or economically feasible. Combining this
greater flexibility with proven harsh-duty packaging can result in
increased efficiencies and improved safety for machines, equip-
ment, OEMs, and operators.
http://www.DataSheet4U.net/
FEATURES
Wireless Design
• Radio (license-free and global): WPAN 802.15.4, 2.4 GHz,
point-to-point
• FCC 15, IC, ACMA, ETSI, COFETEL, WPC & IDA
• Up to 305 m [1000 ft] line-of-sight communication range
when used with a Limitless™ WPMM Series wireless monitor
or WDRR Series receiver module (sold separately)
• Reliable, flexible, and secure wireless transmission
• Standard replaceable battery with ultra-low power con-
sumption
• Direct or remote mount antenna options
Mechanical Design
• IP67; NEMA 1, 4, 12, 13
• 4 PIN M12 micro-change receptacle, cable grip with inter-
nal connector wiring options
• Internal battery power
• Body phosphate treated and epoxy finished with a 30 %
glass-filled PBT plastic head
BENEFITS
• Allows almost any type of electromechanical switch with
low-energy contacts (i.e., gold) to become “wireless”
• Enables presence/absence detection in remote parts of ap-
plication/machinery, where wiring is an issue or not feasible
• Ability to reconfigure multiple switches, which easily allows
for adding, subtracting or relocating of the Limitless™ WLS
Single Switch Adapters
• Reduced installation/maintenance costs with no wires, con-
duit, strain relief, clips, connectors, connection boxes, etc.
• Eliminates issues with wire connection integrity on moving
equipment
• Consumes ultra-low power to prolong battery life
POTENTIAL APPLICATIONS
• Agricultural equipment
• Construction equipment
• Door actuation (up/down) switch
• Industrial machines
• Lifts
• Machine tools
• Packaging machinery
• Wireless warehouse operations
• Wireless electromechanical switch applications (i.e., pres-
sure switch, reed switch, basic switch and/or limit switch)
datasheet pdf - http://www.DataSheet4U.net/

No Preview Available !

Limitless™ WLS Series
PERFORMANCE SPECIFICATIONS
Characteristic
Measure
Series name
WLS Series
Product type
Limitless™ Single Switch Adapter
Availability
Global, license-free bands
Housing material
Zinc body is phosphate treated and epoxy filled; 30 % glass-filled PBT plastic head
Housing type
WLS
Radio
WPAN 802.15.4; 2.4 GHz
Communication Agency Approvals/
Certificates*
• FCC 15.247: United Sates of America
• IC RSS 210: Canada
• COFETEL: Mexico
• ETSI, CE mark: European countries
• ACMA, C-TICK: Australia
• IDA: Singapore
• WPC: India
Antenna type
RP-SMA jack for direct or remote mount antenna options; omni directional standard
Signal range
Nominal 305 m [1000 ft] clear line of sight between Limitless™ switch and monitor/receiver
when using 2.2 dBi integral antennas
Internal power option (battery)
3.6 Vdc Lithium Thionyl Chloride; 2/3 AA size (Est. life >1yr) Manufactured by Uniwell, part
number DEV-10-0009 or Green Energy, part number ER14335M
Sealing
IP67, NEMA 1, 4, 12, 13
EMC
Latest applicable standards: EN 300 328, V1.7.1; EN 61326-1 (2006);
EN 301 489-1, V1.8.1; EN 301 489-17, V2.1.1
Shock
IEC 60068-2-27; half sine, 50 g, 6 mS, 3 axishttp://www.DataSheet4U.net/
Vibration
IEC 60068-2-6; 10-500Hz w/ 0,35 mm peak-to-peak, 58-500 Hz- 10g
Operating temperature
-40 °C to 85 °C [-40 °F to 185 °F]
Electromechanical switch
SPDT (Form C) switch with low-energy contacts (i.e., gold) capable of reliably controlling a
3.6 Vdc @ 30 mA electrical load to ensure proper operation
Electrical connections
• 4-pin M12 micro-connector with three-pole, single keyway female receptacle
• Cable grip with internal screw connector
Note: Maximum cable length 3 m [9.84 ft]
* Honeywell is continuing to add new Country Communication Agency Approvals as opportunities and requirements are established.
2 Honeywell • Sensing and Control
datasheet pdf - http://www.DataSheet4U.net/

No Preview Available !

Limitless™ Single Switch Adapter
WLS SERIES SINGLE-SWITCH ADAPTER PRODUCT NOMENCLATURE
WLS
1
A
00
A
Q
BT1
Switch type
WLS Series
Wireless
Gen Code
1 Version 1
RF Code
A 2.4 GHz;
IEEE 802.15.4
STANDARD LISTINGS
Antenna
Type Code
00 No antenna; RP-SMA
connector jack
01 2.2 dBi omni w/switch
mount; straight design
02 2.2 dBi omni w/switch
mount; tilt/swivel
3.0 dBi omni w/remote
03 adhesive mount
9.8 ft cable
5.5 dBi omni w/remote
04 mag. mount, tilt/swivel
5 ft cable
5.5 dBi omni w/remote
05 mag. mount, tilt/swivel
10ft cable
9.0 dBi omni w/remote
06 mag. mount, tilt/swivel
5 ft cable
9.0 dBi omni w/remote
07 mag. mount, tilt/swivel
10ft cable
8.0 dBi omni w/remote
08 bkt. mount, str. design
3 ft cable
8.0 dBi omni w/remote
09 bkt. mount, str. design
11 ft cable
2.2 dBi omni w/remote
10 mag. mount, tilt/swivel
10 ft cable
0 dBi omni w/
11 switch mount;
straight design
Country Use
Code
A US, Canada,
Mexico
All other
B approved
countries1, 2, 3
1Use with antenna type
codes 00 - 03, 05, 10, 11
only; usage also allowed
in Country Code A.
2Some countries require
specific communication
certifications. Contact
Honeywell for existing
certification information.
3If Limitless devices are
used on machinery that
may shipped globally,
use country code “B”.
Operating
Head Code
Q See specials
http://www.DataSheet4U.net/
Modification Code
(BT2 & BT4 only)
Specials
BT1Head assembled
with cable grip/connector
to label side
Internal battery w/
micro-connector
on top of head
3 BT2Head assembled
with cable grip/connector
to right side
Internal battery w/
micro-connector
on side of head
4 BT3Head assembled
with cable grip/connector
to left side
Internal battery w/
cable grip on
top of head
5 BT4Head assembled
with cable grip/connector
to mounting surface
Internal battery w/
cable grip on
side of head
Part number
Description
WLS1A00AQBT1
Limitless™ WLS Series Single Switch Adapter, no antenna, internal battery with M12 micro-connector on top
of head for use in US, Canada, and Mexico
WLS1A00BQBT1
Limitless™ WLS Series Single Switch Adapter, no antenna, internal battery with M12 micro-connector on top
of head for use in all other approved countries
WLS1A02AQBT1
Limitless™ WLS Series Single Switch Adapter, 2.2 dBi tilt/swivel antenna, internal battery with M12 micro-
connector on top of head for use in US, Canada, and Mexico
WLS1A02BQBT1
Limitless™ WLS Series Single Switch Adapter, 2.2 dBi tilt/swivel antenna, internal battery with M12 micro-
connector on top of head for use in all other approved countries
WLS1A11AQBT1
Limitless™ WLS Series Single Switch Adapter, 0 dBi straight antenna, internal battery with M12 micro-con-
nector on top of head for use in US, Canada, and Mexico
WLS1A11BQBT1
Limitless™ WLS Series Single Switch Adapter, 0 dBi straight antenna, internal battery with M12 micro-con-
nector on top of head for use in all other approved countries
WLS1A00AQBT3
Limitless™ WLS Series Single Switch Adapter, no antenna, internal battery with cable grip on top of head for
use in US, Canada, and Mexico
WLS1A00BQBT3
Limitless™ WLS Series Single Switch Adapter, no antenna, internal battery with cable grip on top of head for
use in all other approved countries
WLS1A02AQBT3
Limitless™ WLS Series Single Switch Adapter, 2.2 dBi tilt/swivel antenna, internal battery with cable grip on
top of head for use in US, Canada, and Mexico
WLS1A02BQBT3
Limitless™ WLS Series Single Switch Adapter, 2.2 dBi tilt/swivel antenna, internal battery with cable grip on
top of head for use in all other approved countries
WLS1A11AQBT3
Limitless™ WLS Series Single Switch Adapter, 0 dBi straight antenna, internal battery with cable grip on top
of head for use in US, Canada, and Mexico
WLS1A11BQBT3
Limitless™ WLS Series Single Switch Adapter, 0 dBi straight antenna, internal battery with cable grip on top
of head for use in all other approved countries
Honeywell • Sensing and Control 3
datasheet pdf - http://www.DataSheet4U.net/

No Preview Available !

Limitless™ WLS Series
WLS SERIES SINGLE-SWITCH ADAPTER DIMENSIONS
http://www.DataSheet4U.net/
4 Honeywell • Sensing and Control
datasheet pdf - http://www.DataSheet4U.net/

No Preview Available !

Limitless™ Single Switch Adapter
WDRR SERIES RECEIVER PRODUCT NOMENCLATURE (used in conjunction with the Limitless™ WLS switch)
WDRR
1
A
00
A0
A
Switch type
WDRR Series
Din-Rail
Receiver
GEN code
1 Version 1
RF Code
A 2.4 GHz;
IEEE 802.15.4
Antenna
type code
00 No antenna; RP-SMA
connector jack
01 2.2 dBi omni w/switch
mount; straight design
02 2.2 dBi omni w/switch
mount; tilt/swivel
3.0 dBi omni w/remote
03 adhesive mount
9.8 ft cable
5.5 dBi omni w/remote
04 mag. mount, tilt/swivel
5 ft cable
5.5 dBi omni w/remote
05 mag. mount, tilt/swivel
10 ft cable
9.0 dBi omni w/remote
06 mag. mount, tilt/swivel
5 ft cable
9.0 dBi omni w/remote
07 mag. mount, tilt/swivel
10 ft cable
8.0 dBi omni w/remote
08 bkt. mount, str. design
3 ft cable
09
8.0 dBi omni w/remote
bkt. mount, str. design
11 ft cable
http://www.DataSheet4U.net/
2.2 dBi omni w/remote
10 mag. mount, tilt/swivel
10 ft cable
Country use
code
A US, Canada
Mexico
All other
B approved
countries1,2,3
1 Use with antenna type
codes 00 - 03, 05, 10, 11
only; usage allowed in
Country Code A.
Output code
0 NPN/PNP
selectable
2 Some countries require
specific communication
certifications. Contact
Honeywell for existing
certification information.
3 If Limitless™ devices are
used on machinery that
may be shipped globally,
use Country Code “B”.
Channel code
A 14 channels
WPMM SERIES MONITOR PRODUCT NOMENCLATURE (used in conjunction with the Limitless™ WLS switch)
WPMM
1
A
00
A
Switch type
WPMM Series
Monitor
Gen Code
1 Version 1
RF Code
A 2.4 GHz;
IEEE 802.15.4
Antenna
type code
00 No antenna; RP-SMA
connector jack
01 2.2 dBi omni w/switch
mount; straight design
02 2.2 dBi omni w/switch
mount; tilt/swivel
3.0 dBi omni w/remote
03 adhesive mount
9.8 ft cable
5.5 dBi omni w/remote
04 mag. mount, tilt/swivel
5 ft cable
5.5 dBi omni w/remote
05 mag. mount, tilt/swivel
10ft cable
9.0 dBi omni w/remote
06 mag. mount, tilt/swivel
5 ft cable
9.0 dBi omni w/remote
07 mag. mount, tilt/swivel
10ft cable
8.0 dBi omni w/remote
08 bkt. mount, str. design
3 ft cable
8.0 dBi omni w/remote
09 bkt. mount, str. design
11 ft cable
2.2 dBi omni w/remote
10 mag. mount, tilt/swivel
10 ft cable
Country use
code
A US, Canada,
Mexico
All other
B approved
countries1, 2, 3
1Use with antenna type
codes 00 - 03, 05, 10, 11
only; usage also allowed
in Country Code A.
2Some countries require
specific communication
certifications. Contact
Honeywell for existing
certification information.
3If Limitless devices are
used on machinery that
may shipped globally,
use country code “B”.
Honeywell • Sensing and Control 5
datasheet pdf - http://www.DataSheet4U.net/