2SA2069.pdf 데이터시트 (총 5 페이지) - 파일 다운로드 2SA2069 데이타시트 다운로드

No Preview Available !

TOSHIBA Transistor Silicon PNP Epitaxial Type
2SA2069
High-Speed Switching Applications
DC-DC Converter Applications
2SA2069
Unit: mm
High DC current gain: hFE = 200 to 500 (IC = 0.15 A)
Low collector-emitter saturation voltage: VCE (sat) = 0.14 V (max)
High-speed switching: tf = 37 ns (typ.)
Absolute Maximum Ratings (Ta = 25°C)
Characteristics
Symbol
Rating
Unit
Collector-base voltage
Collector-emitter voltage
Emitter-base voltage
Collector current
DC
Pulse
Base current
Collector power
dissipation
t = 10 s
DC
Junction temperature
Storage temperature range
VCBO
VCEO
VEBO
IC
ICP
IB
PC
(Note 1)
Tj
Tstg
20
20
7
1.5
2.5
150
2.0
1.0
150
55 to 150
V
V
V
A
mA
W
°C
°C
Note 1: Mounted on an FR4 board (glass epoxy, 1.6 mm thick, Cu
area: 645 mm2)
JEDEC
JEITA
SC-62
TOSHIBA
2-5K1A
Weight: 0.05 g (typ.)
Note 2: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly
even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute
maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
1 2006-11-09

No Preview Available !

Electrical Characteristics (Ta = 25°C)
2SA2069
Characteristics
Collector cut-off current
Emitter cut-off current
Collector-emitter breakdown voltage
DC current gain
Collector-emitter saturation voltage
Base-emitter saturation voltage
Collector output capacitance
Rise time
Switching time
Storage time
Fall time
Symbol
Test Condition
ICBO
IEBO
V (BR) CEO
hFE (1)
hFE (2)
VCE (sat)
VBE (sat)
Cob
tr
tstg
tf
VCB = 20 V, IE = 0
VEB = 7 V, IC = 0
IC = 10 mA, IB = 0
VCE = 2 V, IC = 0.15 A
VCE = 2 V, IC = 0.5 A
IC = 0.5 A, IB = 17 mA
IC = 0.5 A, IB = 17 mA
VCB = 10 V, IE = 0, f = 1 MHz
See Figure 1.
VCC ≈ −10 V, RL = 20
IB1 = IB2 = 17 mA
Min Typ. Max Unit
― ― −100 nA
― ― −100 nA
20 ― ― V
200 500
125
― ― −0.14 V
― ― −1.10 V
12 pF
40
135
ns
37
20 μs
IB2 IB1
IB1 Input
Duty cycle < 1%
IB2
VCC
Output
Marking
4D
Lot No.
Part No. (or abbreviation code)
A line indicates
lead (Pb)-free package or
lead (Pb)-free finish.
Figure 1 Switching Time Test Circuit &
Timing Chart
2 2006-11-09

No Preview Available !

1.6 Common emitter
Ta = 25°C
Single nonrepetitive
pulse
1.2
IC – VCE
30
0.8
0.4
20
15
10
8
6
4
IB = −2 mA
0
0
0.2
0.4
0.6
0.8
Collector-emitter voltage VCE (V)
VCE (sat) – IC
1 Common emitter
IC/IB = 30
Single nonrepetitive pulse
0.1
0.01
Ta = 100°C
55
25
0.001
0.001
0.01
0.1
1
Collector current IC (A)
10
2SA2069
1000
hFE – IC
Ta = 100°C
100
25
55
10
Common emitter
VCE = −2 V
Single nonrepetitive pulse
1
0.001
0.01
0.1
1
Collector current IC (A)
10
VBE (sat) – IC
10
Common emitter
IC/IB = 30
Single nonrepetitive pulse
55 25
1
Ta = 100°C
0.1
0.001
0.01
0.1
1
Collector current IC (A)
10
1.5
Common emitter
VCE = −2 V
Single nonrepetitive
1.2 pulse
IC – VBE
0.9
0.6
0.3
0
0
Ta = 100°C
55
25
0.3 0.6 0.9 1.2
Base-emitter voltage VBE (V)
1.5
3
2006-11-09

No Preview Available !

2SA2069
1000
rth – tw
100
10
1
0.001
0.01
Curves should be applied in thermal limited area.
Single nonrepetitive pulse Ta = 25°C
Mounted on an FR4 board (glass epoxy, 1.6 mm thick, Cu
area: 645 mm2)
0.1 1 10 100 1000
Pulse width tw (s)
Safe Operating Area
10
IC max (pulsed) 10 ms1 ms100 μs
IC max (continuous) 100 ms*
1
10 s*
DC operation *
(Ta = 25°C)
: Single nonrepetitive pulse
0.1
Ta = 25°C
Note that the curves for 100 ms*,
10 s* and DC operation* will be
different when the devices aren’t
mounted on an FR4 board (glass
epoxy, 1.6 mm thick, Cu area:
645 mm2). These characteristic
curves must be derated linearly
with increase in temperature.
0.01
0.1
1
10
Collector-emitter voltage VCE (V)
100
4 2006-11-09

No Preview Available !

2SA2069
RESTRICTIONS ON PRODUCT USE
The information contained herein is subject to change without notice.
20070701-EN
TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
5 2006-11-09