2SA2142.pdf 데이터시트 (총 5 페이지) - 파일 다운로드 2SA2142 데이타시트 다운로드

No Preview Available !

TOSHIBA Transistor Silicon PNP Triple Diffused Type
2SA2142
2SA2142
High-Voltage Switching Applications
Unit: mm
High breakdown voltage: VCEO = 600 V
Absolute Maximum Ratings (Ta = 25°C)
Characteristic
Symbol
Rating
Unit
Collector-base voltage
VCBO
600
V
Collector-emitter voltage
VCEO
600
V
Emitter-base voltage
VEBO 7 V
Collector current
DC
Pulse
IC
ICP
0.5
A
1
Base current
IB
0.25
A
Collector power
dissipation
Ta = 25°C
Tc = 25°C
Pc
1
W
15
Junction temperature
Tj 150 °C
Storage temperature range
Tstg
55 to 150
°C
JEDEC
Note1: Using continuously under heavy loads (e.g. the application of high
temperature/current/voltage and the significant change in
JEITA
TOSHIBA
2-7J1A
temperature, etc.) may cause this product to decrease in the
reliability significantly even if the operating conditions (i.e.
Weight: 0.36 g (typ.)
operating temperature/current/voltage, etc.) are within the
absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report
and estimated failure rate, etc).
1 2009-12-21
Free Datasheet http://www.datasheet4u.com/

No Preview Available !

2SA2142
Electrical Characteristics (Ta = 25°C)
Characteristic
Collector cutoff current
Emitter cutoff current
Collector-emitter breakdown voltage
DC current gain
Collector-emitter saturation voltage
Base-emitter saturation voltage
Transition frequency
Collector output capacitance
Rise time
Switching time
Storage time
Symbol
ICBO
IEBO
V (BR) CEO
hFE (1)
hFE (2)
VCE (sat)
VBE (sat)
fT
Cob
tr
tstg
Test Condition
VCB = −600 V, IE = 0
VEB = −7 V, IC = 0
IC = −10 mA, IB = 0
VCE = −5 V, IC = −1 mA
VCE = −5 V, IC = −50 mA
IC = −100 mA, IB = −10 mA
IC = −100 mA, IB = −10 mA
VCE = 5 V, IC = 50 mA
VCB = 10 V, IE = 0, f = 1 MHz
20 μs
Input IB1
Output
IB2 IB2
VCC 200 V
Min
600
70
100
Typ.
0.76
35
24
0.2
2.3
Max
10
1
500
400
1.0
0.9
Unit
μA
μA
V
V
V
MHz
pF
μs
Fall time
tf
IB1 = 10 mA, IB2 = 20 mA,
Duty Cycle 1%
0.2
Marking
A2142
Product No.
Lot No.
Note2
Note2: A line under a Lot No. identifies the indication of product Labels.
Not underlined: [[Pb]]/INCLUDES > MCV
Underlined: [[G]]/RoHS COMPATIBLE or [[G]]/RoHS [[Pb]]
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS
compatibility of Product. The RoHS is the Directive 2002/95/EC of the European Parliament and of the Council of 27
January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
2 2009-12-21
Free Datasheet http://www.datasheet4u.com/

No Preview Available !

500
400
IC – VCE
100
80
60
40 20
10
300
200
5
2
1
0.5
100
0
0
IB = −0.2 mA
Common emitter
Tc = 25°C
4 8 12 16 20
Collectoremitter voltage VCE (V)
100
Common emitter
IC/IB = 10
VCE (sat) – IC
10
1
0.1
0.01
1
Tc = 100°C
25°C
55°C
10 100
Collector current IC (mA)
1000
2SA2142
1000
100
hFE – IC
Tc = 100°C
25°C
55°C
10
Common emitter
VCE = −5 V
1
1
10
100
Collector current IC (mA)
1000
VBE (sat) – IC
10
Common emitter
IC/IB = 10
1 Tc = −55°C
25°C
100°C
0.1
1
10 100
Collector current IC (mA)
1000
500
Common emitter
VCE = −5 V
400
IC – VBE
300
200
Tc = 100°C
55°C
100
0
0
25°C
0.2
0.4
0.6
0.8
1.0
Baseemitter voltage VBE (V)
1.2
3
2009-12-21
Free Datasheet http://www.datasheet4u.com/

No Preview Available !

rth(j-c) – tw
10
2SA2142
1
0.1
0.001
Curves apply only to limited areas of thermal resistance.
Single nonrepetitive pulse
Tc = 25°C
0.01
0.1
1
10 100
Pulse width tw (s)
10000
Safe operating area
IC max (pulsed)*
1000
IC max (continuous)*
10 ms* 1 ms* 100 μs* 10 μs*
100 ms*
100
10
DC operation
Tc = 25°C
* : Single nonrepetitive pulse
Tc=25°C
Curves must be derated linearly
with increase in temperature.
1
1
1
VCEO max
100
1000
Collectoremitter voltage VCE (V)
4 2009-12-21
Free Datasheet http://www.datasheet4u.com/

No Preview Available !

2SA2142
RESTRICTIONS ON PRODUCT USE
Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the
Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes
for Product and the precautions and conditions set forth in the “TOSHIBA Semiconductor Reliability Handbook” and (b) the
instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their
own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such
design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,
diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating
parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR
APPLICATIONS.
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
5 2009-12-21
Free Datasheet http://www.datasheet4u.com/