AXT528124.pdf 데이터시트 (총 6 페이지) - 파일 다운로드 AXT528124 데이타시트 다운로드

No Preview Available !

AXT5, 6
NARROW-PITCH, THIN
AND SLIM CONNECTOR
NARROW PITCH (0.4 mm)
FOR BOARD-TO-FPC
CONNECTION
CONNECTORS F4S SERIES
www.datasheet4u.com
Socket
Header
FEATURES
1. Space-saving (3.6 mm widthwise)
The required space is smaller than our
F4 series (40-contact type):
Socket — 27% smaller,
Header — 38% smaller
The small size contributes to the
miniaturization of target equipment.
3. The simple lock structure gives
tactile feedback that ensures a
superior mating/unmating operation
feel.
Compliance with RoHS Directive
Socket
3.60
Clips (soldering terminal)*
at the four corners
10.50 (40 contacts)
Pickup width: 0.8mm
Clips (soldering terminal)*
at the four corners
Header
2.60
9.80 (40 contacts)
* Clips for preventing the solder joints from being removed
2. Highly reliable
has strong
resistance to adverse environments.
(See Page 6 for details of the structure)
Note: If extra resistance to shock caused by dropping
is required, we recommend using our previous
F4 Series.
Simple lock structure
4. Gull-wing type terminals
The gull-wing type terminals facilitate
automatic mounting inspections.
5. Connectors for inspection available
Connectors for inspection are available
that are ideal for modular unit inspection
and inspection in device assembly
processes.
APPLICATIONS
Compact portable devices “Cellular
phones, DVC, Digital cameras, etc”
Example of Board-to-FPC connections
Before
FPC
mating Narrow-pitch
connectors F4S
After
mating
Reinforcing plate
Reinforcing
plate
(with FPC)
PCB
1.0mm
The simple lock mechanism ensures that the
connector clicks into position when it is inserted
for reliable single-action insertion on the PCB.
ORDERING INFORMATION
AXT
4
5: Narrow Pitch Connector F4S (0.4 mm pitch) Socket
6: Narrow Pitch Connector F4S (0.4 mm pitch) Header
Number of contacts (2 digits)
Mated height
<Socket>
1: For mated height 1.0 mm
2: For mated height 1.2 mm
<Header>
1: For mated height 1.0 mm
2: For mated height 1.2 mm
Functions
<Socket, Header>
2: Without positioning bosses
Surface treatment (Contact portion / Terminal portion)
<Socket>
4: Base: Ni plating Surface: Au plating (for Ni barrier available)
<Header>
4: Base: Ni plating Surface: Au plating
Note: Please note that models with a mated height of 1.0 mm (7th digit of part number is “1”) and 1.2 mm (7th digit of part number is “2”) are not compatible.
panasonic-electric-works.net/ac

No Preview Available !

AXT5, 6
PRODUCT TYPES
Mated height
Number of contacts
Socket
Part number
Header
Inner carton
Packing
Outer carton
10
AXT510124
AXT610124
12
AXT512124
AXT612124
14
AXT514124
AXT614124
16
AXT516124
AXT616124
www.datasheet4u.com
18
20
AXT518124
AXT520124
AXT618124
AXT620124
22
AXT522124
AXT622124
24
AXT524124
AXT624124
26
AXT526124
AXT626124
28
AXT528124
AXT628124
30
AXT530124
AXT630124
32
AXT532124
AXT632124
34
AXT534124
AXT634124
1.0mm
36
AXT536124
AXT636124
38
AXT538124
AXT638124
3,000 pieces
6,000 pieces
40
AXT540124
AXT640124
42
AXT542124
AXT642124
44
AXT544124
AXT644124
46
AXT546124
AXT646124
48
AXT548124
AXT648124
50
AXT550124
AXT650124
54
AXT554124
AXT654124
60
AXT560124
AXT660124
64
AXT564124
AXT664124
70
AXT570124
AXT670124
80
AXT580124
AXT680124
30
AXT530224
AXT630224
40
AXT540224
AXT640224
1.2mm
50
AXT550224
AXT650224
80
AXT580224
AXT680224
Notes: 1. Order unit: For mass production: in 1-inner-box (1-reel) units
Samples for mounting check: in 50-connector units. Please contact our sales office.
Samples: Small lot orders are possible. Please contact our sales office.
2. The above part numbers are for connectors without positioning bosses, which are standard. When ordering connectors with positioning bosses, please contact our
sales office.
3. Please contact us for connectors having a number of contacts other than those listed above.
SPECIFICATIONS
1. Characteristics
Item
Rated current
Rated voltage
Electrical
characteristics
Breakdown voltage
Insulation resistance
Contact resistance
Mechanical
characteristics
Composite insertion force
Composite removal force
Contact holding force
(Socket contact)
Ambient temperature
Soldering heat resistance
Storage temperature
Environmental
characteristics
Lifetime
characteristics
Unit weight
Thermal shock resistance
(header and socket mated)
Humidity resistance
(header and socket mated)
Saltwater spray resistance
(header and socket mated)
H2S resistance
(header and socket mated)
Insertion and removal life
Specifications
0.3A/contact (Max. 5 A at total contacts)
60V AC/DC
150V AC for 1 min.
Min. 1,000M(initial)
Max. 90m
Max. 0.981N/contacts × contacts (initial)
Min. 0.165N/contacts × contacts
Min. 0.49N/contacts
–55°C to +85°C
Peak temperature: 260°C or less (on the surface of
the PC board around the connector terminals)
300°C within 5 sec. 350°C within 3 sec.
–55°C to +85°C (product only)
–40°C to +50°C (emboss packing)
5 cycles,
insulation resistance min. 100M,
contact resistance max. 90m
120 hours,
insulation resistance min. 100M,
contact resistance max. 90m
24 hours,
insulation resistance min. 100M,
contact resistance max. 90m
48 hours,
contact resistance max. 90m
50 times
50-contact type: Socket: 0.05 g Header: 0.03 g
Conditions
No short-circuiting or damage at a detection current of 1 mA
when the specified voltage is applied for one minute.
Using 250V DC megger (applied for 1 min.)
Based on the contact resistance measurement method
specified by JIS C 5402.
Measuring the maximum force.
As the contact is axially pull out.
No freezing at low temperatures. No dew condensation.
Infrared reflow soldering
Soldering iron
No freezing at low temperatures. No dew condensation.
Sequence
1.
–55
0
3
°C,
30
minutes
2. ~ , Max. 5 minutes
3.
85
+3
0
°C,
30
minutes
4. ~ , Max. 5 minutes
Bath temperature 40±2°C,
humidity 90 to 95% R.H.
Bath temperature 35±2°C,
saltwater concentration 5±1%
Bath temperature 40±2°C, gas concentration 3±1 ppm,
humidity 75 to 80% R.H.
Repeated insertion and removal speed of max. 200 times/
hours
panasonic-electric-works.net/ac

No Preview Available !

AXT5, 6
2. Material and surface treatment
Part name
Molded
portion
Contact and
Post
Material
LCP resin
(UL94V-0)
Copper alloy
Surface treatment
Contact portion: Base: Ni plating Surface: Au plating
Terminal portion: Base: Ni plating Surface: Au plating (except the terminal tips)
The socket terminals close to the portion to be soldered have nickel barriers (exposed nickel portions).
Metal clips: Sockets: Base: Ni plating Surface: Pd+Au flash plating (except the terminal tips)
Headers: Base: Ni plating Surface: Au plating (except the terminal tips)
DwIwMw.EdaNtasSheIeOt4uN.coSm (Unit: mm)
The CAD data of the products with a CAD Data mark can be downloaded from: http://panasonic-electric-works.net/ac
Socket (Mated height: 1.0 mm and 1.2 mm)
CAD Data
A
B±0.1
0.40±0.05
0.15±0.03
D
C0.15
Y note
Z note
0.30±0.03
C±0.1
Note: Since the clip (soldering terminal)* has a single-piece construction,
sections Y and Z are electrically connected.
Terminal coplanarity
0.08
(Contact and clips
(soldering terminal)*)
General tolerance: ±0.2
Mated height/
dimension
1.0mm
1.2mm
D
0.97
1.17
Dimension table (mm)
Number of contacts/
dimension
A
B
C
10 4.5 1.6 3.4
12 4.9 2.0 3.8
14 5.3 2.4 4.2
16 5.7 2.8 4.6
18 6.1 3.2 5.0
20 6.5 3.6 5.4
22 6.9 4.0 5.8
24 7.3 4.4 6.2
26 7.7 4.8 6.6
28 8.1 5.2 7.0
30 8.5 5.6 7.4
32 8.9 6.0 7.8
34 9.3 6.4 8.2
36 9.7 6.8 8.6
38 10.1 7.2 9.0
40 10.5 7.6 9.4
42 10.9 8.0 9.8
44 11.3 8.4 10.2
46 11.7 8.8 10.6
48 12.1 9.2 11.0
50 12.5 9.6 11.4
54 13.3 10.4 12.2
60 14.5 11.6 13.4
64 15.3 12.4 14.2
70 16.5 13.6 15.4
80 18.5 15.6 17.4
Header (Mated height: 1.0 mm and 1.2 mm)
CAD Data
A
B±0.1
0.40±0.05
0.15±0.03
Clip
(soldering terminal)*
0.15±0.03
C±0.1
Dimension table (mm)
Terminal coplanarity
D 0.08
(Post and clips
(soldering terminal)*)
Number of contacts/
dimension
A
B
C
10 3.8 1.6 3.2
12 4.2 2.0 3.6
14 4.6 2.4 4.0
16 5.0 2.8 4.4
18 5.4 3.2 4.8
20 5.8 3.6 5.2
22 6.2 4.0 5.6
24 6.6 4.4 6.0
26 7.0 4.8 6.4
28 7.4 5.2 6.8
30 7.8 5.6 7.2
32 8.2 6.0 7.6
34 8.6 6.4 8.0
36 9.0 6.8 8.4
38 9.4 7.2 8.8
40 9.8 7.6 9.2
42 10.2 8.0 9.6
44 10.6 8.4 10.0
46 11.0 8.8 10.4
General tolerance: ±0.2
48 11.4 9.2 10.8
50 11.8 9.6 11.2
54 12.6 10.4 12.0
Mated height/
dimension
D
60 13.8 11.6 13.2
64 14.6 12.4 14.0
1.0mm
0.83
70 15.8 13.6 15.2
1.2mm
1.01
80 17.8 15.6 17.2
panasonic-electric-works.net/ac

No Preview Available !

• Socket and Header are mated
Header
Socket
Header
Socket
AXT5, 6
Mated height: 1.0 mm
Mated height: 1.2 mm
wwwE.daMtasBheOet4Su.cSomED TAPE DIMENSIONS (Unit: mm) (Common to all sockets and headers)
• Specifications for taping
• Specifications for the plastic reel
(In accordance with JIS C 0806-1990. However, not applied to
(In accordance with EIAJET-7200B.)
the mounting-hole pitch of some connectors.)
Tape I
Tape II
A±0.3
C
1.75
A±0.3
B
C
1.75
D±1 Taping reel
Top cover tape
44
22
Embossed carrier tape
Embossed mounting-hole
8.0 8.0
1.5+00.1 dia.
1.5+00.1 dia.
• Dimension table (Unit: mm)
Type/Mated height Number of contacts
Common for
sockets and headers:
1.0mm, 1.2mm
24 or less
26 to 70
80
Type of taping
Tape I
Tape I
Tape II
A
16.0
24.0
32.0
B
28.4
• Connector orientation with respect to embossed tape feeding direction
Direction
of tape progress
Type
Common for F4S
Socket
Header
C
7.5
11.5
14.2
D
17.4
25.4
33.4
Quantity per reel
3,000
3,000
3,000
Note: There is no indication on this product regarding top-bottom or left-right orientation.
panasonic-electric-works.net/ac

No Preview Available !

AXT5, 6
CONNECTOR FOR INSPECTION
USAGE APPLICATIONS WITH
NARROW PITCH CONNECTOR F4S
3,000 INSERTION AND
REMOVAL TIMES
(0.4mmPITCHES) FOR INSPECTION USAGE
www.datasheet4u.com
Socket
Header
Compliance with RoHS Directive
FEATURES
1. 3,000 insertion and removals (when
as recommended)
From the 50 insertion and removals of
standard type, up to 3,000 insertion and
removals (with recommended insertion
and removal) are possible for use in
inspection.
Ideal for inspection of module units and
inspection during the device assembly
process
2. Same external dimensions and foot
pattern as mated height 1.0mm
standard type.
Since shape is the same as mated height
1.0mm standard type, inspection is
possible without interfering with devices
in the vicinity of standard connectors.
3. Improved mating
Insertion and removal have become
easier due to a reduction in the mating
retention force required by the simple
locking structure and also in the amount
of force needed for insertion and
removal. (We cannot warrant anything
regarding mating retention.)
TABLE OF PRODUT TYPES
: Available for sale
Product
name
F4S for
inspection
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
54
60
64
70
80
Notes:
1. Please inquire about numbers of contacts other than those given above.
2. Please inquire with us regarding delivery times.
3. Please keep the minimum unit for ordering no less than 50 pieces per lot.
4. Please inquire for further information.
PRODUCT TYPES
Specifications
Part No.
Specifications
Part No.
Socket
Without positioning bosses
AXT5E∗∗26
Header
Without positioning bosses
AXT6E∗∗26
Notes: 1. When placing an order, substitute the “” (asterisk) in the above part number with the number of contacts for the required connector.
2. The above part numbers are for connectors without positioning bosses, which are standard. When ordering connectors with positioning bosses, please contact our
sales office.
panasonic-electric-works.net/ac