OC200D.pdf 데이터시트 (총 30 페이지) - 파일 다운로드 OC200D 데이타시트 다운로드

No Preview Available !

Orthopantomograph® OP200 & OP200 D
Orthoceph® OC200 & OC200 D
Service Program Manual
5140241-100 rev 3
Free Datasheet http://www.datasheet4u.net/

No Preview Available !

Free Datasheet http://www.datasheet4u.net/

No Preview Available !

Copyright
Manufactured by
Code: 5140241-100 rev 3 Date: 15 May 2008
Document code: D500293 rev 3
Copyright © 05/2008 by PaloDEx Group Oy.
All rights reserved.
Orthopantomograph® and Orthoceph® are registered trademarks
of Instrumentarium Dental. U.S. patents 4,641,336; 5,016,264;
5,425,065, 5,444,754, 6,731,717 and 6,829,326. German patent
4,344,745. Finnish patents 112594 and 114383. Windows® is
trademark of Microsoft Corporation in the United States of
America and other countries. Pentium® is a registered trademark
of Intel Corporation. Iomega® Jaz® is a registered trademark of
Iomega Corp.
Documentation, trademark and the software are copyrighted
with all rights reserved. Under the copyright laws the
documentation may not be copied, photocopied, reproduced,
translated, or reduced to any electronic medium or machine
readable form in whole or part, without the prior written
permission of Instrumentarium Dental.
The original language of this manual is English.
Instrumentarium Dental reserves the right to make changes in
specification and features shown herein, or discontinue the
product described at any time without notice or obligation.
Contact your Instrumentarium Dental representative for the most
current information.
Instrumentarium Dental
Nahkelantie 160 (P.O. Box 20)
FI-04300 Tuusula
FINLAND
Tel. +358 45 7882 2000
Fax. +358 9 851 4048
For service, contact your local distributor.
Free Datasheet http://www.datasheet4u.net/

No Preview Available !

Free Datasheet http://www.datasheet4u.net/

No Preview Available !

Table of Contents
1 Introduction.................................................................................................................. 1
1.1 General ................................................................................................................. 1
1.2 Exhibition mode..................................................................................................... 1
1.3 Service program quick reference .......................................................................... 2
1.4 How to use the service programs.......................................................................... 4
2 Service program features ........................................................................................... 5
2.1 Sr 70 Log: Display error log .................................................................................. 5
2.2 Sr 71 PAy: Set lease period .................................................................................. 7
2.3 Sr 72 LCA: Adjust lateral TMJ image area
(film units only) ...................................................................................................... 8
2.4 Sr 74 IOC: Display CPU input/output signal check ............................................. 10
2.5 Sr 76 PUP: X-ray tube warm-up.......................................................................... 16
2.6 Sr 77 Prh: Adjust the preheat setting .................................................................. 18
2.7 Sr 78 thA: Set Dose Calibration Constant (DCC)................................................ 19
2.8 Sr 79 SUP: Display line voltage .......................................................................... 20
2.9 Sr 80 CrL: Test motor movement........................................................................ 20
2.10 Sr 81 bPL: Display biteplate properties
(Volumetric Tomography option only) ................................................................. 22
2.11 Sr 82 COL: Set/display collimator information .................................................... 23
2.12 Sr 86 Sto: Store settings ..................................................................................... 25
2.13 Sr 87 LAL: Set linear adjustment value for VT .................................................... 25
2.14 Sr 88 CAL: Disable automatic cephalostat alignment correction
(digital units only) ................................................................................................ 26
2.15 Sr 88 CAL: Set cephalostat alignment value (film units only) ............................. 27
2.16 Sr 89 COP: Set country options .......................................................................... 27
2.17 Sr 90 PIN: Panorama installation program.......................................................... 30
2.18 Sr 91 CIN: Cephalostat installation program (digital units only).......................... 31
2.19 Sr 92 CHE: Set level of self-checks .................................................................... 32
2.20 Sr 93 BAL: Adjust beam alignment board sensitivity .......................................... 33
5140241-100 rev 3
Instrumentarium Dental
i
Free Datasheet http://www.datasheet4u.net/