CS1060.pdf 데이터시트 (총 20 페이지) - 파일 다운로드 CS1060 데이타시트 다운로드

No Preview Available !

70 Amp AC/DC Current Probe
CS 1060 (PA-677)
DC-1MHz
(1mV=2mA at 500 mV/A)
INSTRUCTION MANUAL
Free Datasheet http://www.datasheet-pdf.com/

No Preview Available !

1
Free Datasheet http://www.datasheet-pdf.com/

No Preview Available !

TABLE OF CONTENTS
General Safety Instructions------------------------------------------------- 4
Safety Terms and Symbols-------------------------------------------------- 5
Getting Started------------------------------------------------------------------6
Basic Operation-----------------------------------------------------------------8
Maintenance--------------------------------------------------------------------10
Specifications------------------------------------------------------------------13
Replaceable Parts-------------------------------------------------------------19
Accessories---------------------------------------------------------------------37
2
Free Datasheet http://www.datasheet-pdf.com/

No Preview Available !

PA-677
70 Amp AC/DC Current Probe
3
Free Datasheet http://www.datasheet-pdf.com/

No Preview Available !

General Safety Instructions:
Read the following safety instructions to avoid injury and prevent damage
to this product or any products connected to it. Use this product only as
specified.
Only qualified personnel should perform service procedures.
To Avoid Fire or Personal Injury
Connect and Disconnect Properly. Connect the probe output to the
measurement instrument before connecting the probe to the circuit under
test. Disconnect the probe input and the probe ground from the circuit
under test before disconnecting the probe from the measurement
instrument.
Observe All Terminal Ratings. To avoid fire or shock hazard, observe
all rating and markings on the product. Consult the instruction manual for
further ratings information before making connections to the product.
Replace Batteries Properly. Replace batteries only with the proper
type and rating specified.
Do Not Operate Without Covers. Do not operate this product without
the covers or panels.
Avoid Exposed Circuitry. Do not touch exposed connections and
components when power is present.
Do Not Operate With Suspected Failures. If you suspect there is
damage to this product, have it inspected by qualified service personnel.
Do Not Operate in Wet/Damp Conditions.
Do Not Operate in an Explosive Atmosphere.
Keep Product Surfaces Clean and Dry.
4
Free Datasheet http://www.datasheet-pdf.com/