G190ETN01.0.pdf 데이터시트 (총 25 페이지) - 파일 다운로드 G190ETN01.0 데이타시트 다운로드

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
G190ETN01.0
() Preliminary Specification
(V) Final Specification
Module
Model Name
19” SXGA TFT-LCD Module
G190ETN01.0
Customer
Date
Approved by
Note: This Specification is subject to change
without notice.
Checked &
Approved by
Vito Huang
Date
11/10/2011
Prepared by
Date
Vivian Huang
11/10/2011
Audio-Video Display Business Unit /
AU Optronics corporation
document version 1.0
1/25
Free Datasheet http://www.Datasheet4U.com

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
G190ETN01.0
Contents
1. Handling Precautions...............................................................................................................4
2. General Description .................................................................................................................5
2.1 Display Characteristics.......................................................................................................5
3. Functional Block Diagram .......................................................................................................9
4. Absolute Maximum Ratings...................................................................................................10
4.1 TFT LCD Module ..............................................................................................................10
4.2 Absolute Ratings of Environment .....................................................................................10
5. Electrical characteristics .......................................................................................................11
5.1 TFT LCD Module ..............................................................................................................11
6. Signal Characteristic..............................................................................................................14
6.1 Pixel Format Image...........................................................................................................14
6.2 The Input Data Format......................................................................................................14
6.3 Signal Description ............................................................................................................15
6.4 Interface Timing ................................................................................................................17
6.5 Power ON/OFF Sequence................................................................................................19
7. Connector & Pin Assignment ................................................................................................20
7.1 TFT LCD Module ..............................................................................................................20
7.2 Backlight Unit ...................................................................................................................21
8. Reliability Test ........................................................................................................................22
9. Label and Packing ..................................................................................................................23
9.1. Shipping Label ...............................................................................................................23
9.2 Packing Form ..................................................................................................................23
9.3 Palletizing sequence .......................................................................................................23
10. Outline Drawing ....................................................................................................................24
document version 1.0
2/25
Free Datasheet http://www.Datasheet4U.com

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
G190ETN01.0
Record of Revision
Version & Date Page
Old Description
New Description
0.0 2011/09/13
1.0 2011/11/10
All Frist Draft
23
Update Label and Packing
Remark
document version 1.0
3/25
Free Datasheet http://www.Datasheet4U.com

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
G190ETN01.0
1. Handling Precautions
1) Since front polarizer is easily damaged, please be cautious and not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or soft cloth.
5) Since the panel is made of glass, it may be broken or cracked if dropped or bumped on hard
surface.
6) To avoid ESD (Electro Static Discharde) damage, be sure to ground yourself before handling
TFT-LCD Module.
7) Do not open nor modify the module assembly.
8) Do not press the reflector sheet at the back of the module to any direction.
9) In case if a module has to be put back into the packing container slot after it was taken out
from the container, do not press the center of the LED light bar edge. Instead, press at the far
ends of the LED light bar edge softly. Otherwise the TFT Module may be damaged.
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the
Interface Connector of the TFT Module.
11) TFT-LCD Module is not allowed to be twisted & bent even force is added on module in a very short
time. Please design your display product well to avoid external force applying to module by
end-user directly.
12) Small amount of materials without flammability grade are used in the TFT-LCD module. The
TFT-LCD module should be supplied by power complied with requirements of Limited Power Source
(IEC60950 or UL1950), or be applied exemption.
13) Severe temperature condition may result in different luminance, response time and lamp ignition
voltage.
14) Continuous operating TFT-LCD display under low temperature environment may accelerate lamp
exhaustion and reduce luminance dramatically.
15) The data on this specification sheet is applicable when LCD module is placed in landscape position.
16) Continuous displaying fixed pattern may induce image sticking. It’s recommended to use screen
saver or shuffle content periodically if fixed pattern is displayed on the screen.
document version 1.0
4/25
Free Datasheet http://www.Datasheet4U.com

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
G190ETN01.0
2. General Description
G190ETN01.0 is a Color Active Matrix Liquid Crystal Display composed of a TFT-LCD panel, a driver circuit, and
a backlight system. The screen format is intended to support the SXGA (1280(H) x 1024(V)) screen and 16.7M
colors (RGB 6-bits + HiFRC data). All input signals are 2-channel LVDS interface.
2.1 Display Characteristics
The following items are characteristics summary on the table under 25 condition:
Items
Screen Diagonal
Active Area
Pixels H x V
Pixel Pitch
Pixel Arrangement
Display Mode
White Luminance
Contrast Ratio
Optical ResponseTime
Nominal Input Voltage VDD
Power Consumption
Weight
Physical Size (H x V x D)
Electrical Interface
Surface Treatment
Support Color
Temperature Range
Operating
Storage (Non-Operating)
RoHS Compliance
Unit
[mm]
[mm]
[mm]
[cd/m2]
[msec]
[Volt]
[Watt]
[Grams]
[mm]
[oC]
[oC]
Specifications
482.6 (19.0")
376.32 (H) x 301.06 (V)
1280(x3) x 1024
0.294 (per one triad) x 0.294
R.G.B. Vertical Stripe
Normally White
350 (center, Typ) @60.0mA
1000 : 1 (Typ)
5 ms(Typ, on/off)
+5.0 V
14.5 W (Typ) (PDD= 4.7 W, PLED=9.8 W )
1800 (Typ)
396 (H) x 324 (V) x 11.2(D) (Typ)
Dual channel LVDS
Hard-coating (3H), Non-Glare treatment
16.7M colors (RGB 6-bit + Hi_FRC)
0 to +50
-20 to +60
RoHS Compliance
document version 1.0
5/25
Free Datasheet http://www.Datasheet4U.com