D1223.pdf 데이터시트 (총 5 페이지) - 파일 다운로드 D1223 데이타시트 다운로드

No Preview Available !

2SD1223
TOSHIBA Transistor Silicon NPN Epitaxial Type (PCT Process) (Darlington)
2SD1223
Switching Applications
Hammer Drive, Pulse Motor Drive Applications
Power Amplifier Applications
Unit: mm
High DC current gain: hFE = 2000 (min) (VCE = 2 V, IC = 1 A)
Low saturation voltage: VCE (sat) = 1.5 V (max) (IC = 3 A)
Complementary to 2SB908.
Absolute Maximum Ratings (Ta = 25°C)
Characteristics
Symbol
Rating
Unit
Collector-base voltage
Collector-emitter voltage
Emitter-base voltage
Collector current
Base current
Collector power
dissipation
Ta = 25°C
Tc = 25°C
VCBO
VCEO
VEBO
IC
IB
PC
100 V
80 V
5V
4A
0.4 A
1.0
W
15
JEDEC
JEITA
Junction temperature
Storage temperature range
Tj 150 °C
Tstg
55 to 150
°C
TOSHIBA
2-7J1A
Weight: 0.36 g (typ.)
Note: Using continuously under heavy loads (e.g. the application of high
temperature/current/voltage and the significant change in temperature, etc.) may cause this product to
decrease in the reliability significantly even if the operating conditions (i.e. operating
temperature/current/voltage, etc.) are within the absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/”Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Equivalent Circuit
BASE
COLLECTOR
4.5 k
300
EMITTER
1 2010-02-05
Free Datasheet http://www.Datasheet4U.com

No Preview Available !

Electrical Characteristics (Ta = 25°C)
2SD1223
Characteristics
Collector cut-off current
Emitter cut-off current
Collector-emitter breakdown voltage
DC current gain
Collector-emitter saturation voltage
Base-emitter saturation voltage
Symbol
Test Condition
ICBO
IEBO
V (BR) CEO
hFE (1)
hFE (2)
VCE (sat)
VBE (sat)
VCB = 100 V, IE = 0
VEB = 5 V, IC = 0
IC = 10 mA, IB = 0
VCE = 2 V, IC = 1 A
VCE = 2 V, IC = 3 A
IC = 3 A, IB = 6 mA
IC = 3 A, IB = 6 mA
Min Typ. Max Unit
80
2000
1000
20 μA
2.5 mA
V
1.5 V
2.0 V
Turn-on time
Switching time Storage time
Fall time
ton
20 μs
IB1
OUTPUT 0.2
tstg
INPUT
IB2
IB2
1.5
μs
VCC = 30 V
tf 0.6
IB1 = IB2 = 6 mA, DUTY CYCLE 1%
Marking
D1223
Part No. (or abbreviation code)
Lot No.
Note 1
Note 1:
A line under a Lot No. identifies the indication of product Labels.
Not underlined: [[Pb]]/INCLUDES > MCV
Underlined: [[G]]/RoHS COMPATIBLE or [[G]]/RoHS [[Pb]]
Please contact your TOSHIBA sales representative for details as to environmental matters such as the
RoHS compatibility of Product. The RoHS is the Directive 2002/95/EC of the European Parliament and
of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in
electrical and electronic equipment.
2 2010-02-05
Free Datasheet http://www.Datasheet4U.com

No Preview Available !

IC – VCE
4
Common emitter
Tc = 25°C
3
2
500
450
400
350
300
250
1
IB = 200 μA
0
0
012345
Collector-emitter voltage VCE (V)
IC – VCE
4
Common emitter
Tc = 55°C
3
2
1
800
700
600
500
IB = 400 μA
0
0
012345
Collector-emitter voltage VCE (V)
2SD1223
IC – VCE
4
Common emitter
Tc = 100°C
3
2
300
250
200
175
150
1
IB = 125 μA
0
0
012345
Collector-emitter voltage VCE (V)
IC – VBE
4
Common emitter
VCE = 2 V
3
2
Tc = 100°C 25 55
1
0
0 0.8 1.6 2.4 3.2 4.0
Base-emitter voltage VBE (V)
10000
5000
3000
1000
500
300
0.1
hFE – IC
Tc = 100°C
25
55
Common emitter
VCE = 2 V
0.3 1 3 10
Collector current IC (A)
VCE (sat) – IC
3
1
0.5
0.3
0.2
Tc = 55°C
25
100
0.5
Common emitter
IC/IB = 500
13
Collector current IC (A)
5
3 2010-02-05
Free Datasheet http://www.Datasheet4U.com

No Preview Available !

VBE (sat) – IC
5 Common emitter
IC/IB = 500
3
Tc = 55°C
25
1 100
0.5
0.3
13
Collector current IC (A)
5
Safe Operating Area
10
IC max (pulsed)*
5
3 IC max
(continuous)
1 ms*
10 ms*
1
DC operation
0.5 (Tc = 25°C)
0.3
*: Single nonrepetitive pulse
0.1 Tc = 25°C
Curves must be derated linearly
0.05 with increase in temperature.
0.03
1 3 10
VCEO
max
30
100
Collector-emitter voltage VCE (V)
2SD1223
16 (1)
12
PC – Ta
(1) Tc = Ta infinite heat sink
(2) Ceramic substrate
50 × 50 × 0.8 mm
(3) No heat sink
8
4 (2)
(3)
0
0 40 80 120 160 200
Ambient temperature Ta (°C)
240
4 2010-02-05
Free Datasheet http://www.Datasheet4U.com

No Preview Available !

2SD1223
RESTRICTIONS ON PRODUCT USE
Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the
Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes
for Product and the precautions and conditions set forth in the “TOSHIBA Semiconductor Reliability Handbook” and (b) the
instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their
own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such
design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,
diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating
parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR
APPLICATIONS.
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
5 2010-02-05
Free Datasheet http://www.Datasheet4U.com