FPL SERIES CONNECTOR
FPL connector for board to board by cable
connection is designed for the wide range of
cable size(AWG#28-#40) as compared with
existing SGC connector and cable assembly by
blanket soldering with different size cables for
SGC and Discrete wire.
Further, FPL connector has a function to protect
the flux overflow to the mated contact point by
the special construction at soldering.
Cell Phone/Digital Video Camera/Digital Camera
PDA/Mobile electronics device/Television set
Mobile Audio/Visual Devices
>Mating point : 1.0mm pitch, Cable side/Board side: 0.5mm pitch, SMT type
www.DataSheet4U.com >FPL STD type 30P, 40P, 50P FPL H/B type 28P, 32P, 40P FPL-D 44P
>Height at mating with vertical receptacle and Right Angle plug is 4.3mm.
>Cable assembly by blanket soldering with different size cables for SGC and Discrete wire.
>Overflow protection for the flux to the mated contact by the special construction.
>EMI characteristic by metal shell and Impedance matching
>The click sensation permits a check of sure mating
>Rated Current [AWG#40] 0.3A AC/DC -[AWG#28] 1.0A AC/DC
>Rated Voltage 100V AC
>Applicable Temp. Range -20 - +85
>Withstand Voltage [FPL] AC 250V(rms)/min. [FPL-D] AC 100V(rms)/min.
>Insulation Resistance [FPL] 500M-ohm MIN./DC500V [FPL-D] 100M-ohm MIN./DC100V
1 I-PEX CO.,LTD.