G190EG01V1.pdf 데이터시트 (총 30 페이지) - 파일 다운로드 G190EG01V1 데이타시트 다운로드

No Preview Available !

DATA DISPLAY GROUP
Datasheet
AUO
G190EG01V1
UP-02-054
The information contained in this document has been carefully researched and i s, to the best of ou r
knowledge, accurate. However, we assume no li ability for any product failures or damage s, immediate or
consequential, resulting from the use of the information provided herein. Our products are not intended for
use in systems in which failures of product could result in personal injury. All trademarks mentioned herein
are property of their respective owners. All specifications are subject to change without notice.
http://www.Datasheet4U.com

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
G190EG01 V1
(V ) Preliminary Specification
( ) Final Specification
Module
Model Name
19.0” SXGA Color TFT-LCD
G190EG01 V1
Customer
Date
Approved by
Note: This Specification is subject to
change without notice.
document version 0.1
Checked &
Approved by
Vito Huang
Date
1/7, 2011
Prepared by
Linda Lee
1/7, 2011
Audio-Video Business Unit /
AU Optronics corporation
1/29

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
Record of Revision
G190EG01 V1
Version & Date Page
Old Description
0.1 2011/01/07 All Frist Edition for Customer
New Description
Remark
document version 0.1
2/29

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
G190EG01 V1
Contents
1. Handling Precautions .................................................................................................................. 4
2. General Description ..................................................................................................................... 5
2.1 Display Characteristics ........................................................................................................................ 6
2.2 Optical Characteristics......................................................................................................................... 7
3. Functional Block Diagram.........................................................................................................11
4. Absolute Maximum Ratings......................................................................................................12
4.1 Absolute Ratings of TFT LCD Module ............................................................................................. 12
4.2 Absolute Ratings of Backlight Unit ................................................................................................... 12
4.3 Absolute Ratings of Environment ...................................................................................................... 12
5. Electrical characteristics ..........................................................................................................14
5.1 TFT LCD Module ............................................................................................................................. 14
5.2 Backlight Unit.................................................................................................................................... 16
6. Signal Characteristic .................................................................................................................17
6.1 Pixel Format Image ........................................................................................................................... 17
6.2 The Input Data Format ...................................................................................................................... 18
6.4 Interface Timing................................................................................................................................. 20
6.5 Power ON/OFF Sequence................................................................................................................. 23
7. Connector & Pin Assignment ...................................................................................................23
7.1 TFT LCD Module ............................................................................................................................. 24
7.2 Backlight Unit.................................................................................................................................... 25
8. Reliability Test ............................................................................................................................25
9. Shipping Label............................................................................................................................27
10. Mechanical Characteristic ......................................................................................................28
document version 0.1
3/29

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
G190EG01 V1
1. Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth when
handling.
7) Do not open or modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) In case if a Module has to be put back into the packing container slot after once it was taken out
from the container, do not press the center of the Cold Cathode Fluorescent Lamp (CCFL) reflector
edge. Instead, press at the far ends of the CCFL reflector edge softly. Otherwise the TFT Module
may be damaged.
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the
Interface Connector of the TFT Module.
11) After installation of the TFT Module into an enclosure, do not twist nor bend the TFT Module even
momentary. At designing the enclosure, it should be taken into consideration that no
bending/twisting forces are applied to the TFT Module from outside. Otherwise the TFT Module
may be damaged.
12) Cold Cathode Fluorescent Lamp (CCFL) in LCD contains a small amount of mercury. Please follow local
ordinances or regulations for disposal.
13) Small amount of materials having no flammability grade is used in the LCD module. The LCD module
should be supplied by power complied with requirements of Limited Power Source (IEC60950 or
UL1950), or be applied exemption.
14) The LCD module is designed so that the CCFL in it is supplied by Limited Current Circuit (IEC60950 or
UL1950). Do not connect the CCFL in Hazardous Voltage Circuit.
document version 0.1
4/29