KX-DT346.pdf 데이터시트 (총 24 페이지) - 파일 다운로드 KX-DT346 데이타시트 다운로드

No Preview Available !

Quick Reference Guide
<KX-DT346>
Digital Proprietary Telephone
Model No. KX-DT333/KX-DT343/KX-DT346
Thank you for purchasing a Digital Proprietary Telephone (DPT).
Please read this manual carefully before using this product and
save this manual for future use. For more details, please refer to the
manuals of the PBX.
Note: In this manual, the suffix of each model number is omitted unless
necessary.
Accessories (included)
Handset: 1
Handset Cord: 1
Wall Mounting
Adaptor*1: 1
Screws for wall: 2
Telephone Line
Cord: 1
*1 This telephone comes with the wall mounting adaptor already attached.
To remove the adaptor, refer to step 1 on page 17.

No Preview Available !

This unit supports the following optional devices and features:
KX-DT333 KX-DT343 KX-DT346
Features
Display
3-Line 3-Line 6-Line
Flexible Buttons
LCD Backlight
24 24 24
QQ
Options
KX-NT303 Add-on 12 Key Module
QQ
KX-NT307 (PSLP1528) Bluetooth®
Module*1 *2 *3
QQ
KX-DT301 USB Module*3
QQ
KX-DT390 DSS Console (with 60
keys)*2
Q
Q
Q
Q: Available
*1 The availability of the Bluetooth Module depends on the software version of
the connected PBX. Consult your dealer for more details.
*2 For information on connecting, refer to the each included manual.
*3 When connecting DPTs via Digital XDP, this optional device cannot be
used.
Trademark:
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc.
and any use of such marks by Matsushita Electric Industrial Co., Ltd. is
under licence.
2

No Preview Available !

LCoocnatrtioolns of
A
Location of Controls
V
UT
B
C
D
E
FS
G
H
I
JR
KQ
<KX-DT346>
LMN
A LCD (Liquid Crystal
Display)
B PAUSE: Used to insert a
pause when storing a
telephone number. This
button is also used for
programming this unit.
C FWD/DND (Call Forwarding/
Do Not Disturb): Used to set
Call Forwarding or Do Not
Disturb on your extension.
D CONF (Conference): Used
to establish a multiple party
conversation.
OP
E INTERCOM: Used to make
or receive intercom calls.
F AUTO ANS (Auto Answer)/
MUTE: Used to receive an
incoming call in hands-free
mode or mute the
microphone/handset during a
conversation.
G AUTO DIAL/STORE: Used
for System/Personal Speed
Dialling or storing
programme changes.
3

No Preview Available !

Location of Controls
H TRANSFER: Used to
transfer a call to another
party.
I REDIAL: Used to redial the
last dialled number.
J MESSAGE: Used to leave a
message waiting indication
or call back the party who left
the message waiting
indication.
K Headset Jack
L FLASH/RECALL: Used to
disconnect the current call
and make another call
without hanging up.
M HOLD: Used to place a call
on hold.
N SP-PHONE
(Speakerphone): Used for
performing hands-free
operations.
O ENTER: Used to assign the
selected item.
P Microphone: Used for
hands-free conversations.
Q Navigator Key: Used to
adjust the volume and the
display contrast or select
desired items.
R CANCEL: Used to cancel
the selected item.
S Flexible Buttons: Used to
seize an outside line or
perform a feature that has
been assigned to the key.
T LCD Panel: Can be adjusted
to the desired angle.
U Soft Buttons (S1-S4): S1-
S4 (located from left to right)
are used to select the item
displayed on the bottom line
of the display.
V Message/Ringer Lamp:
When you receive an
intercom call, the lamp
flashes green, and on an
outside call, the lamp flashes
red. When someone has left
you a message, the lamp
stays on red.
4

No Preview Available !

Settings
Settings
Speaker volume While in a hands-free
conversation
Handset/Headset While using the handset or
volume*1
headset
Ringer volume While on-hook or receiving a call
LCD Contrast While on-hook
Press Up to increase
or Down to decrease
the volume.
PAUSE
PAUSE
Ring Tone
PAUSE
(CO)
OR
INTERCOM
Press 2 times.
LCD Backlight*2 While on-hook
PAUSE
OR
AUTO DIAL
STORE
PAUSE
OR
AUTO DIAL
STORE
Automatic
Always ON
Always OFF
OR
AUTO DIAL
PAUSE
STORE
*1 If you hear your own voice through the handset or headset, decrease the
volume.
*2 For KX-DT343/KX-DT346 only.
5